Quantcast

opkg install task-native-sdk

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

opkg install task-native-sdk

Rakshas
This post has NOT been accepted by the mailing list yet.
Hi Fellows,

I was trying to install The Native Perl, C and C++ libraries on the Gumstix Overo. After the installation, the Overo Complained that there was no space and when I did df -k It showed /dev/root to be 100%. What may I do now?

Below is the output of the df -k.

Regards

Rakshas

Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/root               255488    254372      1116 100% /
tmpfs                       40         0        40   0% /mnt/.splash
none                    121200       116    121084   0% /dev
tmpfs                   121200       440    120760   0% /var/volatile
tmpfs                   121200         0    121200   0% /dev/shm
tmpfs                   121200         0    121200   0% /media/ram
/dev/mmcblk0p2         3428944    698724   2556040  21% /media/mmcblk0p2
/dev/mmcblk0p1          327652      3668    323984   1% /media/mmcblk0p1
 
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: opkg install task-native-sdk

Scott Ellis
Looks like your rootfs is not on the usual /dev/mmcblk0p2.

What was your kernel command line?

For example:
root@overo:~# cat /proc/cmdline
console=ttyO2,115200n8 mpurate=800 vram=12M omapfb.mode=dvi:1680x1050MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait

Loading...