Wireless not found on stock image.

classic Classic list List threaded Threaded
15 messages Options
Reply | Threaded
Open this post in threaded view
|

Wireless not found on stock image.

Alan Brumley-3

 

I apologize in advance for regurgitating so much information, I'm just trying to help speed things along.

I've looked for a two nights now and can't find a solution to unstick me on this problem.  Thanks for any help you can give.

 

I have an overo fire and a tobi board.  It just arrived from gumstix last week and is running the factory firmware that came with it.

 

I'm trying to use the wired ethernet controller as well as the wifi controller.

 

Out of the box, the wired connection seems to be happy as eth1

eth1      Link encap:Ethernet  HWaddr 00:15:C9:28:D9:C1

          inet addr:192.168.50.110  Bcast:192.168.50.255  Mask:255.255.255.0

 

The problem is getting the wifi up.   I've modified my /etc/network/interfaces as shown below but when I try

 

"ifup wlan0"    I get the following error:

Error for wireless request "Set Mode" (8B06) :

    SET failed on device wlan0 ; No such device.

Error for wireless request "Set ESSID" (8B1A) :

    SET failed on device wlan0 ; No such device.

SIOCSIFADDR: No such device

wlan0: unknown interface: No such device

SIOCSIFNETMASK: No such device

SIOCGIFADDR: No such device

SIOCSIFBROADCAST: No such device

wlan0: unknown interface: No such device

Failed to bring up wlan0.

 

I am trying to join a simple non-encrypted ad-hoc network w/ static IPs.

 

 

I have the following modules loaded on a clean boot:

root@overo:~# lsmod

Module                  Size  Used by

bufferclass_ti          3555  0

omaplfb                 8304  0

pvrsrvkm              126292  2 bufferclass_ti,omaplfb

ipv6                  219860  18

option                 16236  0

ads7846                 8515  0

usbserial              30552  1 option

root@overo:~#

 

I've also tried modprobing various other apparent wifi modules as I could find, but none seemed to help.

------------------------------------------------------------

here is my interfaces file.

 

/etc/network/interfaces

root@overo:~# cat /etc/network/interfaces

# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

 

# The loopback interface

#

auto lo

iface lo inet loopback

 

#

# Wired interfaces

#

 

#auto eth0

#iface eth0 inet dhcp

#iface eth1 inet dhcp

 

#

# Wireless interfaces

#

 

# Example of an unencrypted (no WEP or WPA) wireless connection

# that connects to any available access point:

#

 

allow-hotplug wlan0

auto wlan0

iface wlan0 inet static

address 192.168.2.2

netmask 255.255.255.0

wireless-mode ad-hoc

wireless-essid gumstix-network

 

#allow-hotplug wlan0

#iface wlan0 inet static

#       wireless_mode ad-hoc

#       wireless_essid HSMM-MESH

#       address 10.10.11.22

#       netmask 255.0.0.0

#       network 10.0.0.0

 

# Example of an unencrypted (no WEP or WPA) wireless connection

<SNIP>   I can promise that every line after is a comment line and the stock file.

 

I thought this device was available over usb, but when I run

root@overo:~# lsusb -t

Bus#  2

`-Dev#   1 Vendor 0x1d6b Product 0x0002

Bus#  1

`-Dev#   1 Vendor 0x1d6b Product 0x0002

root@overo:~#

 

there's nothing there.

I do have a blue and green LED lit however.

 

Here are my start up messages.

root@overo:~# cat /var/log/messages

Mar 11 04:04:41 overo Linux version 2.6.34 ([hidden email]) (gcc version 4.3.3 (GCC) ) #1 Wed Oct 20 10:22:48 PDT 2010

Mar 11 04:04:41 overo CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f

Mar 11 04:04:41 overo CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache

Mar 11 04:04:41 overo Machine: Gumstix Overo

Mar 11 04:04:41 overo Memory policy: ECC disabled, Data cache writeback

Mar 11 04:04:41 overo syslog-ng[818]: syslog-ng starting up; version='2.0.5'

Mar 11 04:04:41 overo OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )

Mar 11 04:04:41 overo SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000

Mar 11 04:04:41 overo Reserving 12582912 bytes SDRAM for VRAM

Mar 11 04:04:41 overo Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024

Mar 11 04:04:41 overo Kernel command line: console=ttyS2,115200n8 mpurate=500 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi root=/dev/mtdblock4 rw rootfstype=jffs2

Mar 11 04:04:41 overo PID hash table entries: 1024 (order: 0, 4096 bytes)

Mar 11 04:04:41 overo Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Mar 11 04:04:41 overo Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Mar 11 04:04:41 overo Memory: 128MB 128MB = 256MB total

Mar 11 04:04:41 overo Memory: 240920k/240920k available, 21224k reserved, 0K highmem

Mar 11 04:04:41 overo Virtual kernel memory layout:

Mar 11 04:04:41 overo vector  : 0xffff0000 - 0xffff1000   (   4 kB)

Mar 11 04:04:41 overo fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

Mar 11 04:04:41 overo DMA     : 0xffc00000 - 0xffe00000   (   2 MB)

Mar 11 04:04:41 overo vmalloc : 0xd0800000 - 0xf8000000   ( 632 MB)

Mar 11 04:04:41 overo lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)

Mar 11 04:04:41 overo modules : 0xbf000000 - 0xc0000000   (  16 MB)

Mar 11 04:04:41 overo .init : 0xc0008000 - 0xc00f2000   ( 936 kB)

Mar 11 04:04:41 overo .text : 0xc00f2000 - 0xc05f6000   (5136 kB)

Mar 11 04:04:41 overo .data : 0xc061a000 - 0xc0659400   ( 253 kB)

Mar 11 04:04:41 overo Hierarchical RCU implementation.

Mar 11 04:04:41 overo NR_IRQS:402

Mar 11 04:04:41 overo Clocking rate (Crystal/Core/MPU): 26.0/224/500 MHz

Mar 11 04:04:41 overo Reprogramming SDRC clock to 224791666 Hz

Mar 11 04:04:41 overo GPMC revision 5.0

Mar 11 04:04:41 overo IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts

Mar 11 04:04:41 overo Total of 96 interrupts on 1 active controller

Mar 11 04:04:41 overo OMAP GPIO hardware version 2.5

Mar 11 04:04:41 overo OMAP clockevent source: GPTIMER1 at 32768 Hz

Mar 11 04:04:41 overo Console: colour dummy device 80x30

Mar 11 04:04:41 overo Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696)

Mar 11 04:04:41 overo Mount-cache hash table entries: 512

Mar 11 04:04:41 overo CPU: Testing write buffer coherency: ok

Mar 11 04:04:41 overo devtmpfs: initialized

Mar 11 04:04:41 overo regulator: core version 0.5

Mar 11 04:04:41 overo NET: Registered protocol family 16

Mar 11 04:04:41 overo Found NAND on CS0

Mar 11 04:04:41 overo hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available

Mar 11 04:04:41 overo Switched to new clocking rate (Crystal/Core/MPU): 26.0/500/224 MHz

Mar 11 04:04:41 overo OMAP DMA hardware revision 4.0

Mar 11 04:04:41 overo bio: create slab <bio-0> at 0

Mar 11 04:04:41 overo SCSI subsystem initialized

Mar 11 04:04:41 overo usbcore: registered new interface driver usbfs

Mar 11 04:04:41 overo usbcore: registered new interface driver hub

Mar 11 04:04:41 overo usbcore: registered new device driver usb

Mar 11 04:04:41 overo i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz

Mar 11 04:04:41 overo twl4030: PIH (irq 7) chaining IRQs 368..375

Mar 11 04:04:41 overo twl4030: power (irq 373) chaining IRQs 376..383

Mar 11 04:04:41 overo twl4030: gpio (irq 368) chaining IRQs 384..401

Mar 11 04:04:41 overo regulator: VUSB1V5: 1500 mV normal standby

Mar 11 04:04:41 overo regulator: VUSB1V8: 1800 mV normal standby

Mar 11 04:04:41 overo regulator: VUSB3V1: 3100 mV normal standby

Mar 11 04:04:41 overo twl4030_usb twl4030_usb: Initialized TWL4030 USB module

Mar 11 04:04:41 overo regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby

Mar 11 04:04:41 overo regulator: VDAC: 1800 mV normal standby

Mar 11 04:04:41 overo regulator: VDVI: 1800 mV normal standby

Mar 11 04:04:41 overo i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz

Mar 11 04:04:41 overo Advanced Linux Sound Architecture Driver Version 1.0.22.1.

Mar 11 04:04:41 overo Bluetooth: Core ver 2.15

Mar 11 04:04:41 overo NET: Registered protocol family 31

Mar 11 04:04:41 overo Bluetooth: HCI device and connection manager initialized

Mar 11 04:04:41 overo Bluetooth: HCI socket layer initialized

Mar 11 04:04:41 overo cfg80211: Calling CRDA to update world regulatory domain

Mar 11 04:04:41 overo Switching to clocksource 32k_counter

Mar 11 04:04:41 overo musb_hdrc: version 6.0, musb-dma, host, debug=0

Mar 11 04:04:41 overo musb_hdrc musb_hdrc: MUSB HDRC host driver

Mar 11 04:04:42 overo musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1

Mar 11 04:04:42 overo usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

Mar 11 04:04:42 overo usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Mar 11 04:04:42 overo usb usb1: Product: MUSB HDRC host driver

Mar 11 04:04:42 overo usb usb1: Manufacturer: Linux 2.6.34 musb-hcd

Mar 11 04:04:42 overo usb usb1: SerialNumber: musb_hdrc

Mar 11 04:04:42 overo hub 1-0:1.0: USB hub found

Mar 11 04:04:42 overo hub 1-0:1.0: 1 port detected

Mar 11 04:04:42 overo musb_hdrc musb_hdrc: USB Host mode controller at fa0ab000 using DMA, IRQ 92

Mar 11 04:04:42 overo NET: Registered protocol family 2

Mar 11 04:04:42 overo IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

Mar 11 04:04:42 overo TCP established hash table entries: 8192 (order: 4, 65536 bytes)

Mar 11 04:04:42 overo TCP bind hash table entries: 8192 (order: 3, 32768 bytes)

Mar 11 04:04:42 overo TCP: Hash tables configured (established 8192 bind 8192)

Mar 11 04:04:42 overo TCP reno registered

Mar 11 04:04:42 overo UDP hash table entries: 256 (order: 0, 4096 bytes)

Mar 11 04:04:42 overo UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

Mar 11 04:04:42 overo NET: Registered protocol family 1

Mar 11 04:04:42 overo RPC: Registered udp transport module.

Mar 11 04:04:42 overo RPC: Registered tcp transport module.

Mar 11 04:04:42 overo RPC: Registered tcp NFSv4.1 backchannel transport module.

Mar 11 04:04:42 overo VFS: Disk quotas dquot_6.5.2

Mar 11 04:04:42 overo Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

Mar 11 04:04:42 overo JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Mar 11 04:04:42 overo msgmni has been set to 470

Mar 11 04:04:42 overo alg: No test for stdrng (krng)

Mar 11 04:04:42 overo Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

Mar 11 04:04:42 overo io scheduler noop registered

Mar 11 04:04:42 overo io scheduler deadline registered

Mar 11 04:04:42 overo io scheduler cfq registered (default)

Mar 11 04:04:42 overo OMAP DSS rev 2.0

Mar 11 04:04:42 overo OMAP DISPC rev 3.0

Mar 11 04:04:42 overo OMAP VENC rev 2

Mar 11 04:04:42 overo OMAP DSI rev 1.0

Mar 11 04:04:42 overo Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

Mar 11 04:04:42 overo serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654

Mar 11 04:04:42 overo serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654

Mar 11 04:04:42 overo serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654

Mar 11 04:04:42 overo console [ttyS2] enabled

Mar 11 04:04:42 overo brd: module loaded

Mar 11 04:04:42 overo loop: module loaded

Mar 11 04:04:42 overo omap2-nand driver initializing

Mar 11 04:04:42 overo NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)

Mar 11 04:04:42 overo cmdlinepart partition parsing not available

Mar 11 04:04:42 overo Creating 5 MTD partitions on "omap2-nand.0":

Mar 11 04:04:42 overo 0x000000000000-0x000000080000 : "xloader"

Mar 11 04:04:42 overo 0x000000080000-0x000000240000 : "uboot"

Mar 11 04:04:42 overo 0x000000240000-0x000000280000 : "uboot environment"

Mar 11 04:04:42 overo 0x000000280000-0x000000680000 : "linux"

Mar 11 04:04:42 overo 0x000000680000-0x000010000000 : "rootfs"

Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.

Mar 11 04:04:42 overo smsc911x-mdio: probed

Mar 11 04:04:42 overo eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)

Mar 11 04:04:42 overo net eth0: MAC Address: 00:15:c9:28:d9:c1

Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.

Mar 11 04:04:42 overo usbcore: registered new interface driver asix

Mar 11 04:04:42 overo usbcore: registered new interface driver cdc_ether

Mar 11 04:04:42 overo ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

Mar 11 04:04:42 overo ehci-omap ehci-omap.0: OMAP-EHCI Host Controller

Mar 11 04:04:42 overo ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2

Mar 11 04:04:42 overo ehci-omap ehci-omap.0: irq 77, io mem 0x48064800

Mar 11 04:04:42 overo ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00

Mar 11 04:04:42 overo usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

Mar 11 04:04:42 overo usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Mar 11 04:04:42 overo usb usb2: Product: OMAP-EHCI Host Controller

Mar 11 04:04:42 overo usb usb2: Manufacturer: Linux 2.6.34 ehci_hcd

Mar 11 04:04:42 overo usb usb2: SerialNumber: ehci-omap.0

Mar 11 04:04:42 overo hub 2-0:1.0: USB hub found

Mar 11 04:04:42 overo hub 2-0:1.0: 3 ports detected

Mar 11 04:04:42 overo Initializing USB Mass Storage driver...

Mar 11 04:04:42 overo usbcore: registered new interface driver usb-storage

Mar 11 04:04:42 overo USB Mass Storage support registered.

Mar 11 04:04:42 overo udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)

Mar 11 04:04:42 overo mice: PS/2 mouse device common for all mice

Mar 11 04:04:42 overo twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0

Mar 11 04:04:42 overo i2c /dev entries driver

Mar 11 04:04:42 overo OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec

Mar 11 04:04:42 overo twl4030_wdt: probe of twl4030_wdt failed with error -16

Mar 11 04:04:42 overo Bluetooth: HCI UART driver ver 2.2

Mar 11 04:04:42 overo Bluetooth: HCI H4 protocol initialized

Mar 11 04:04:42 overo Bluetooth: HCI BCSP protocol initialized

Mar 11 04:04:42 overo Bluetooth: HCILL protocol initialized

Mar 11 04:04:42 overo usbcore: registered new interface driver usbhid

Mar 11 04:04:42 overo usbhid: USB HID core driver

Mar 11 04:04:42 overo usbcore: registered new interface driver snd-usb-audio

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-0

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-1

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-2

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-3

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-4

Mar 11 04:04:42 overo overo SoC init

Mar 11 04:04:42 overo asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok

Mar 11 04:04:42 overo ALSA device list:

Mar 11 04:04:42 overo #0: overo (twl4030)

Mar 11 04:04:42 overo oprofile: using arm/armv7

Mar 11 04:04:42 overo TCP cubic registered

Mar 11 04:04:42 overo NET: Registered protocol family 17

Mar 11 04:04:42 overo NET: Registered protocol family 15

Mar 11 04:04:42 overo Bluetooth: L2CAP ver 2.14

Mar 11 04:04:42 overo Bluetooth: L2CAP socket layer initialized

Mar 11 04:04:42 overo Bluetooth: SCO (Voice Link) ver 0.6

Mar 11 04:04:42 overo Bluetooth: SCO socket layer initialized

Mar 11 04:04:42 overo Bluetooth: RFCOMM TTY layer initialized

Mar 11 04:04:42 overo Bluetooth: RFCOMM socket layer initialized

Mar 11 04:04:42 overo Bluetooth: RFCOMM ver 1.11

Mar 11 04:04:42 overo Bluetooth: BNEP (Ethernet Emulation) ver 1.3

Mar 11 04:04:42 overo Bluetooth: BNEP filters: protocol multicast

Mar 11 04:04:42 overo Bluetooth: HIDP (Human Interface Emulation) ver 1.2

Mar 11 04:04:42 overo ThumbEE CPU extension supported.

Mar 11 04:04:42 overo VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1

Mar 11 04:04:42 overo fbcvt: 1024x768@60: CVT Name - .786M3-R

Mar 11 04:04:42 overo Console: switching to colour frame buffer device 128x48

Mar 11 04:04:42 overo regulator_init_complete: incomplete constraints, leaving VDAC on

Mar 11 04:04:42 overo twl_rtc twl_rtc: setting system clock to 2011-03-11 04:04:25 UTC (1299816265)

Mar 11 04:04:42 overo JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

Mar 11 04:04:42 overo VFS: Mounted root (jffs2 filesystem) on device 31:4.

Mar 11 04:04:42 overo devtmpfs: mounted

Mar 11 04:04:42 overo Freeing init memory: 936K

Mar 11 04:04:42 overo udev: starting version 151

Mar 11 04:04:42 overo udev: renamed network interface eth0 to eth1

Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial

Mar 11 04:04:42 overo USB Serial support registered for generic

Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial_generic

Mar 11 04:04:42 overo usbserial: USB Serial Driver core

Mar 11 04:04:42 overo ads7846 spi1.0: touchscreen, irq 274

Mar 11 04:04:42 overo ads7846 spi1.0: no device detected, test read result was 0x00000000

Mar 11 04:04:42 overo USB Serial support registered for GSM modem (1-port)

Mar 11 04:04:42 overo usbcore: registered new interface driver option

Mar 11 04:04:42 overo option: v0.7.2:USB Driver for GSM modems

Mar 11 04:04:42 overo NET: Registered protocol family 10

Mar 11 04:04:42 overo ntpd[837]: ntpd 4.2.4p7@1.1607 Thu Sep  9 23:45:54 UTC 2010 (1)

Mar 11 04:04:42 overo ntpd[838]: precision = 30.000 usec

Mar 11 04:04:42 overo ntpd[838]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled

Mar 11 04:04:42 overo ntpd[838]: Listening on interface #1 wildcard, ::#123 Disabled

Mar 11 04:04:42 overo ntpd[838]: Listening on interface #2 lo, ::1#123 Enabled

Mar 11 04:04:42 overo ntpd[838]: Listening on interface #3 lo, 127.0.0.1#123 Enabled

Mar 11 04:04:42 overo ntpd[838]: kernel time sync status 0040

Mar 11 04:04:42 overo ntpd[838]: frequency initialized 0.000 PPM from /etc/ntp.drift

Mar 11 04:07:58 overo ntpd[838]: synchronized to LOCAL(0), stratum 14

Mar 11 04:07:58 overo ntpd[838]: kernel time sync status change 0001

Mar 11 04:09:43 overo ntpd[838]: failed to initialize interface for address fe80::215:c9ff:fe28:d9c1

Mar 11 04:09:43 overo ntpd[838]: Listening on interface #5 eth1, 192.168.50.110#123 Enabled

Mar 11 04:14:41 overo syslog-ng[818]: Log statistics; processed='center(queued)=1515', processed='center(received)=326', processed='destination(messages)=214', processed='destination(mailinfo)=0', processed='destination(mailwarn)=0', processed='destination(console)=0', processed='destination(ppp)=0', processed='destination(authlog)=2', processed='destination(user)=0', processed='destination(lpr)=0', processed='destination(daemon)=16', processed='destination(uucp)=0', processed='destination(cron)=0', processed='destination(kern)=307', processed='destination(console_all)=326', processed='destination(mail)=0', processed='destination(xconsole)=0', processed='destination(debug)=324', processed='destination(syslog)=326', processed='destination(newserr)=0', processed='destination(newscrit)=0', processed='destination(newsnotice)=0', processed='destination(mailerr)=0', processed='source(src)=326', processed='source(net)=0'

Mar 11 04:14:43 overo ntpd[838]: failed to initialize interface for address fe80::215:c9ff:fe28:d9c1

 

 

 

 


------------------------------------------------------------------------------
Colocation vs. Managed Hosting
A question and answer guide to determining the best fit
for your organization - today and in the future.
http://p.sf.net/sfu/internap-sfd2d
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users
Reply | Threaded
Open this post in threaded view
|

Re: Wireless not found on stock image.

Neil MacMunn
Try ifconfig wlan0 up.

I've had a similar problem with ifup in the past.

--
Neil


On 11-03-10 08:35 PM, Alan Brumley wrote:

> I apologize in advance for regurgitating so much information, I'm just
> trying to help speed things along.
>
> I've looked for a two nights now and can't find a solution to unstick me
> on this problem.  Thanks for any help you can give.
>
> I have an overo fire and a tobi board.  It just arrived from gumstix
> last week and is running the factory firmware that came with it.
>
> I'm trying to use the wired ethernet controller as well as the wifi
> controller.
>
> Out of the box, the wired connection seems to be happy as eth1
>
> eth1      Link encap:Ethernet  HWaddr 00:15:C9:28:D9:C1
>
>            inet addr:192.168.50.110  Bcast:192.168.50.255
> Mask:255.255.255.0
>
> The problem is getting the wifi up.   I've modified my
> /etc/network/interfaces as shown below but when I try
>
> "ifup wlan0"    I get the following error:
>
> Error for wireless request "Set Mode" (8B06) :
>
>      SET failed on device wlan0 ; No such device.
>
> Error for wireless request "Set ESSID" (8B1A) :
>
>      SET failed on device wlan0 ; No such device.
>
> SIOCSIFADDR: No such device
>
> wlan0: unknown interface: No such device
>
> SIOCSIFNETMASK: No such device
>
> SIOCGIFADDR: No such device
>
> SIOCSIFBROADCAST: No such device
>
> wlan0: unknown interface: No such device
>
> Failed to bring up wlan0.
>
> I am trying to join a simple non-encrypted ad-hoc network w/ static IPs.
>
> I have the following modules loaded on a clean boot:
>
> root@overo:~# lsmod
>
> Module                  Size  Used by
>
> bufferclass_ti          3555  0
>
> omaplfb                 8304  0
>
> pvrsrvkm              126292  2 bufferclass_ti,omaplfb
>
> ipv6                  219860  18
>
> option                 16236  0
>
> ads7846                 8515  0
>
> usbserial              30552  1 option
>
> root@overo:~#
>
> I've also tried modprobing various other apparent wifi modules as I
> could find, but none seemed to help.
>
> ------------------------------------------------------------
>
> here is my interfaces file.
>
> /etc/network/interfaces
>
> root@overo:~# cat /etc/network/interfaces
>
> # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
>
> # The loopback interface
>
> #
>
> auto lo
>
> iface lo inet loopback
>
> #
>
> # Wired interfaces
>
> #
>
> #auto eth0
>
> #iface eth0 inet dhcp
>
> #iface eth1 inet dhcp
>
> #
>
> # Wireless interfaces
>
> #
>
> # Example of an unencrypted (no WEP or WPA) wireless connection
>
> # that connects to any available access point:
>
> #
>
> allow-hotplug wlan0
>
> auto wlan0
>
> iface wlan0 inet static
>
> address 192.168.2.2
>
> netmask 255.255.255.0
>
> wireless-mode ad-hoc
>
> wireless-essid gumstix-network
>
> #allow-hotplug wlan0
>
> #iface wlan0 inet static
>
> #       wireless_mode ad-hoc
>
> #       wireless_essid HSMM-MESH
>
> #       address 10.10.11.22
>
> #       netmask 255.0.0.0
>
> #       network 10.0.0.0
>
> # Example of an unencrypted (no WEP or WPA) wireless connection
>
> <SNIP>   I can promise that every line after is a comment line and the
> stock file.
>
> I thought this device was available over usb, but when I run
>
> root@overo:~# lsusb -t
>
> Bus#  2
>
> `-Dev#   1 Vendor 0x1d6b Product 0x0002
>
> Bus#  1
>
> `-Dev#   1 Vendor 0x1d6b Product 0x0002
>
> root@overo:~#
>
> there's nothing there.
>
> I do have a blue and green LED lit however.
>
> Here are my start up messages.
>
> root@overo:~# cat /var/log/messages
>
> Mar 11 04:04:41 overo Linux version 2.6.34 ([hidden email]) (gcc
> version 4.3.3 (GCC) ) #1 Wed Oct 20 10:22:48 PDT 2010
>
> Mar 11 04:04:41 overo CPU: ARMv7 Processor [411fc083] revision 3
> (ARMv7), cr=10c53c7f
>
> Mar 11 04:04:41 overo CPU: VIPT nonaliasing data cache, VIPT nonaliasing
> instruction cache
>
> Mar 11 04:04:41 overo Machine: Gumstix Overo
>
> Mar 11 04:04:41 overo Memory policy: ECC disabled, Data cache writeback
>
> Mar 11 04:04:41 overo syslog-ng[818]: syslog-ng starting up; version='2.0.5'
>
> Mar 11 04:04:41 overo OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
>
> Mar 11 04:04:41 overo SRAM: Mapped pa 0x40200000 to va 0xfe400000 size:
> 0x100000
>
> Mar 11 04:04:41 overo Reserving 12582912 bytes SDRAM for VRAM
>
> Mar 11 04:04:41 overo Built 1 zonelists in Zone order, mobility grouping
> on.  Total pages: 65024
>
> Mar 11 04:04:41 overo Kernel command line: console=ttyS2,115200n8
> mpurate=500 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y
> omapdss.def_disp=dvi root=/dev/mtdblock4 rw rootfstype=jffs2
>
> Mar 11 04:04:41 overo PID hash table entries: 1024 (order: 0, 4096 bytes)
>
> Mar 11 04:04:41 overo Dentry cache hash table entries: 32768 (order: 5,
> 131072 bytes)
>
> Mar 11 04:04:41 overo Inode-cache hash table entries: 16384 (order: 4,
> 65536 bytes)
>
> Mar 11 04:04:41 overo Memory: 128MB 128MB = 256MB total
>
> Mar 11 04:04:41 overo Memory: 240920k/240920k available, 21224k
> reserved, 0K highmem
>
> Mar 11 04:04:41 overo Virtual kernel memory layout:
>
> Mar 11 04:04:41 overo vector  : 0xffff0000 - 0xffff1000   (   4 kB)
>
> Mar 11 04:04:41 overo fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
>
> Mar 11 04:04:41 overo DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
>
> Mar 11 04:04:41 overo vmalloc : 0xd0800000 - 0xf8000000   ( 632 MB)
>
> Mar 11 04:04:41 overo lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
>
> Mar 11 04:04:41 overo modules : 0xbf000000 - 0xc0000000   (  16 MB)
>
> Mar 11 04:04:41 overo .init : 0xc0008000 - 0xc00f2000   ( 936 kB)
>
> Mar 11 04:04:41 overo .text : 0xc00f2000 - 0xc05f6000   (5136 kB)
>
> Mar 11 04:04:41 overo .data : 0xc061a000 - 0xc0659400   ( 253 kB)
>
> Mar 11 04:04:41 overo Hierarchical RCU implementation.
>
> Mar 11 04:04:41 overo NR_IRQS:402
>
> Mar 11 04:04:41 overo Clocking rate (Crystal/Core/MPU): 26.0/224/500 MHz
>
> Mar 11 04:04:41 overo Reprogramming SDRC clock to 224791666 Hz
>
> Mar 11 04:04:41 overo GPMC revision 5.0
>
> Mar 11 04:04:41 overo IRQ: Found an INTC at 0xfa200000 (revision 4.0)
> with 96 interrupts
>
> Mar 11 04:04:41 overo Total of 96 interrupts on 1 active controller
>
> Mar 11 04:04:41 overo OMAP GPIO hardware version 2.5
>
> Mar 11 04:04:41 overo OMAP clockevent source: GPTIMER1 at 32768 Hz
>
> Mar 11 04:04:41 overo Console: colour dummy device 80x30
>
> Mar 11 04:04:41 overo Calibrating delay loop... 499.92 BogoMIPS
> (lpj=1949696)
>
> Mar 11 04:04:41 overo Mount-cache hash table entries: 512
>
> Mar 11 04:04:41 overo CPU: Testing write buffer coherency: ok
>
> Mar 11 04:04:41 overo devtmpfs: initialized
>
> Mar 11 04:04:41 overo regulator: core version 0.5
>
> Mar 11 04:04:41 overo NET: Registered protocol family 16
>
> Mar 11 04:04:41 overo Found NAND on CS0
>
> Mar 11 04:04:41 overo hw perfevents: enabled with ARMv7 Cortex-A8 PMU
> driver, 5 counters available
>
> Mar 11 04:04:41 overo Switched to new clocking rate (Crystal/Core/MPU):
> 26.0/500/224 MHz
>
> Mar 11 04:04:41 overo OMAP DMA hardware revision 4.0
>
> Mar 11 04:04:41 overo bio: create slab <bio-0> at 0
>
> Mar 11 04:04:41 overo SCSI subsystem initialized
>
> Mar 11 04:04:41 overo usbcore: registered new interface driver usbfs
>
> Mar 11 04:04:41 overo usbcore: registered new interface driver hub
>
> Mar 11 04:04:41 overo usbcore: registered new device driver usb
>
> Mar 11 04:04:41 overo i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
>
> Mar 11 04:04:41 overo twl4030: PIH (irq 7) chaining IRQs 368..375
>
> Mar 11 04:04:41 overo twl4030: power (irq 373) chaining IRQs 376..383
>
> Mar 11 04:04:41 overo twl4030: gpio (irq 368) chaining IRQs 384..401
>
> Mar 11 04:04:41 overo regulator: VUSB1V5: 1500 mV normal standby
>
> Mar 11 04:04:41 overo regulator: VUSB1V8: 1800 mV normal standby
>
> Mar 11 04:04:41 overo regulator: VUSB3V1: 3100 mV normal standby
>
> Mar 11 04:04:41 overo twl4030_usb twl4030_usb: Initialized TWL4030 USB
> module
>
> Mar 11 04:04:41 overo regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV
> normal standby
>
> Mar 11 04:04:41 overo regulator: VDAC: 1800 mV normal standby
>
> Mar 11 04:04:41 overo regulator: VDVI: 1800 mV normal standby
>
> Mar 11 04:04:41 overo i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
>
> Mar 11 04:04:41 overo Advanced Linux Sound Architecture Driver Version
> 1.0.22.1.
>
> Mar 11 04:04:41 overo Bluetooth: Core ver 2.15
>
> Mar 11 04:04:41 overo NET: Registered protocol family 31
>
> Mar 11 04:04:41 overo Bluetooth: HCI device and connection manager
> initialized
>
> Mar 11 04:04:41 overo Bluetooth: HCI socket layer initialized
>
> Mar 11 04:04:41 overo cfg80211: Calling CRDA to update world regulatory
> domain
>
> Mar 11 04:04:41 overo Switching to clocksource 32k_counter
>
> Mar 11 04:04:41 overo musb_hdrc: version 6.0, musb-dma, host, debug=0
>
> Mar 11 04:04:41 overo musb_hdrc musb_hdrc: MUSB HDRC host driver
>
> Mar 11 04:04:42 overo musb_hdrc musb_hdrc: new USB bus registered,
> assigned bus number 1
>
> Mar 11 04:04:42 overo usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0002
>
> Mar 11 04:04:42 overo usb usb1: New USB device strings: Mfr=3,
> Product=2, SerialNumber=1
>
> Mar 11 04:04:42 overo usb usb1: Product: MUSB HDRC host driver
>
> Mar 11 04:04:42 overo usb usb1: Manufacturer: Linux 2.6.34 musb-hcd
>
> Mar 11 04:04:42 overo usb usb1: SerialNumber: musb_hdrc
>
> Mar 11 04:04:42 overo hub 1-0:1.0: USB hub found
>
> Mar 11 04:04:42 overo hub 1-0:1.0: 1 port detected
>
> Mar 11 04:04:42 overo musb_hdrc musb_hdrc: USB Host mode controller at
> fa0ab000 using DMA, IRQ 92
>
> Mar 11 04:04:42 overo NET: Registered protocol family 2
>
> Mar 11 04:04:42 overo IP route cache hash table entries: 2048 (order: 1,
> 8192 bytes)
>
> Mar 11 04:04:42 overo TCP established hash table entries: 8192 (order:
> 4, 65536 bytes)
>
> Mar 11 04:04:42 overo TCP bind hash table entries: 8192 (order: 3, 32768
> bytes)
>
> Mar 11 04:04:42 overo TCP: Hash tables configured (established 8192 bind
> 8192)
>
> Mar 11 04:04:42 overo TCP reno registered
>
> Mar 11 04:04:42 overo UDP hash table entries: 256 (order: 0, 4096 bytes)
>
> Mar 11 04:04:42 overo UDP-Lite hash table entries: 256 (order: 0, 4096
> bytes)
>
> Mar 11 04:04:42 overo NET: Registered protocol family 1
>
> Mar 11 04:04:42 overo RPC: Registered udp transport module.
>
> Mar 11 04:04:42 overo RPC: Registered tcp transport module.
>
> Mar 11 04:04:42 overo RPC: Registered tcp NFSv4.1 backchannel transport
> module.
>
> Mar 11 04:04:42 overo VFS: Disk quotas dquot_6.5.2
>
> Mar 11 04:04:42 overo Dquot-cache hash table entries: 1024 (order 0,
> 4096 bytes)
>
> Mar 11 04:04:42 overo JFFS2 version 2.2. (NAND) (SUMMARY)  Â© 2001-2006
> Red Hat, Inc.
>
> Mar 11 04:04:42 overo msgmni has been set to 470
>
> Mar 11 04:04:42 overo alg: No test for stdrng (krng)
>
> Mar 11 04:04:42 overo Block layer SCSI generic (bsg) driver version 0.4
> loaded (major 253)
>
> Mar 11 04:04:42 overo io scheduler noop registered
>
> Mar 11 04:04:42 overo io scheduler deadline registered
>
> Mar 11 04:04:42 overo io scheduler cfq registered (default)
>
> Mar 11 04:04:42 overo OMAP DSS rev 2.0
>
> Mar 11 04:04:42 overo OMAP DISPC rev 3.0
>
> Mar 11 04:04:42 overo OMAP VENC rev 2
>
> Mar 11 04:04:42 overo OMAP DSI rev 1.0
>
> Mar 11 04:04:42 overo Serial: 8250/16550 driver, 4 ports, IRQ sharing
> enabled
>
> Mar 11 04:04:42 overo serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72)
> is a ST16654
>
> Mar 11 04:04:42 overo serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73)
> is a ST16654
>
> Mar 11 04:04:42 overo serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74)
> is a ST16654
>
> Mar 11 04:04:42 overo console [ttyS2] enabled
>
> Mar 11 04:04:42 overo brd: module loaded
>
> Mar 11 04:04:42 overo loop: module loaded
>
> Mar 11 04:04:42 overo omap2-nand driver initializing
>
> Mar 11 04:04:42 overo NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba
> (Micron NAND 256MiB 1,8V 16-bit)
>
> Mar 11 04:04:42 overo cmdlinepart partition parsing not available
>
> Mar 11 04:04:42 overo Creating 5 MTD partitions on "omap2-nand.0":
>
> Mar 11 04:04:42 overo 0x000000000000-0x000000080000 : "xloader"
>
> Mar 11 04:04:42 overo 0x000000080000-0x000000240000 : "uboot"
>
> Mar 11 04:04:42 overo 0x000000240000-0x000000280000 : "uboot environment"
>
> Mar 11 04:04:42 overo 0x000000280000-0x000000680000 : "linux"
>
> Mar 11 04:04:42 overo 0x000000680000-0x000010000000 : "rootfs"
>
> Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.
>
> Mar 11 04:04:42 overo smsc911x-mdio: probed
>
> Mar 11 04:04:42 overo eth0: attached PHY driver [Generic PHY]
> (mii_bus:phy_addr=0:01, irq=-1)
>
> Mar 11 04:04:42 overo net eth0: MAC Address: 00:15:c9:28:d9:c1
>
> Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.
>
> Mar 11 04:04:42 overo usbcore: registered new interface driver asix
>
> Mar 11 04:04:42 overo usbcore: registered new interface driver cdc_ether
>
> Mar 11 04:04:42 overo ehci_hcd: USB 2.0 'Enhanced' Host Controller
> (EHCI) Driver
>
> Mar 11 04:04:42 overo ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
>
> Mar 11 04:04:42 overo ehci-omap ehci-omap.0: new USB bus registered,
> assigned bus number 2
>
> Mar 11 04:04:42 overo ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
>
> Mar 11 04:04:42 overo ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
>
> Mar 11 04:04:42 overo usb usb2: New USB device found, idVendor=1d6b,
> idProduct=0002
>
> Mar 11 04:04:42 overo usb usb2: New USB device strings: Mfr=3,
> Product=2, SerialNumber=1
>
> Mar 11 04:04:42 overo usb usb2: Product: OMAP-EHCI Host Controller
>
> Mar 11 04:04:42 overo usb usb2: Manufacturer: Linux 2.6.34 ehci_hcd
>
> Mar 11 04:04:42 overo usb usb2: SerialNumber: ehci-omap.0
>
> Mar 11 04:04:42 overo hub 2-0:1.0: USB hub found
>
> Mar 11 04:04:42 overo hub 2-0:1.0: 3 ports detected
>
> Mar 11 04:04:42 overo Initializing USB Mass Storage driver...
>
> Mar 11 04:04:42 overo usbcore: registered new interface driver usb-storage
>
> Mar 11 04:04:42 overo USB Mass Storage support registered.
>
> Mar 11 04:04:42 overo udc: OMAP UDC driver, version: 4 October 2004
> (iso) (dma)
>
> Mar 11 04:04:42 overo mice: PS/2 mouse device common for all mice
>
> Mar 11 04:04:42 overo twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
>
> Mar 11 04:04:42 overo i2c /dev entries driver
>
> Mar 11 04:04:42 overo OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
>
> Mar 11 04:04:42 overo twl4030_wdt: probe of twl4030_wdt failed with
> error -16
>
> Mar 11 04:04:42 overo Bluetooth: HCI UART driver ver 2.2
>
> Mar 11 04:04:42 overo Bluetooth: HCI H4 protocol initialized
>
> Mar 11 04:04:42 overo Bluetooth: HCI BCSP protocol initialized
>
> Mar 11 04:04:42 overo Bluetooth: HCILL protocol initialized
>
> Mar 11 04:04:42 overo usbcore: registered new interface driver usbhid
>
> Mar 11 04:04:42 overo usbhid: USB HID core driver
>
> Mar 11 04:04:42 overo usbcore: registered new interface driver snd-usb-audio
>
> Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-0
>
> Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-1
>
> Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-2
>
> Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-3
>
> Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-4
>
> Mar 11 04:04:42 overo overo SoC init
>
> Mar 11 04:04:42 overo asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
>
> Mar 11 04:04:42 overo ALSA device list:
>
> Mar 11 04:04:42 overo #0: overo (twl4030)
>
> Mar 11 04:04:42 overo oprofile: using arm/armv7
>
> Mar 11 04:04:42 overo TCP cubic registered
>
> Mar 11 04:04:42 overo NET: Registered protocol family 17
>
> Mar 11 04:04:42 overo NET: Registered protocol family 15
>
> Mar 11 04:04:42 overo Bluetooth: L2CAP ver 2.14
>
> Mar 11 04:04:42 overo Bluetooth: L2CAP socket layer initialized
>
> Mar 11 04:04:42 overo Bluetooth: SCO (Voice Link) ver 0.6
>
> Mar 11 04:04:42 overo Bluetooth: SCO socket layer initialized
>
> Mar 11 04:04:42 overo Bluetooth: RFCOMM TTY layer initialized
>
> Mar 11 04:04:42 overo Bluetooth: RFCOMM socket layer initialized
>
> Mar 11 04:04:42 overo Bluetooth: RFCOMM ver 1.11
>
> Mar 11 04:04:42 overo Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>
> Mar 11 04:04:42 overo Bluetooth: BNEP filters: protocol multicast
>
> Mar 11 04:04:42 overo Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>
> Mar 11 04:04:42 overo ThumbEE CPU extension supported.
>
> Mar 11 04:04:42 overo VFP support v0.3: implementor 41 architecture 3
> part 30 variant c rev 1
>
> Mar 11 04:04:42 overo fbcvt: 1024x768@60: CVT Name - .786M3-R
>
> Mar 11 04:04:42 overo Console: switching to colour frame buffer device
> 128x48
>
> Mar 11 04:04:42 overo regulator_init_complete: incomplete constraints,
> leaving VDAC on
>
> Mar 11 04:04:42 overo twl_rtc twl_rtc: setting system clock to
> 2011-03-11 04:04:25 UTC (1299816265)
>
> Mar 11 04:04:42 overo JFFS2 notice: (1) jffs2_build_xattr_subsystem:
> complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan)
> and 0 of xref (0 dead, 0 orphan) found.
>
> Mar 11 04:04:42 overo VFS: Mounted root (jffs2 filesystem) on device 31:4.
>
> Mar 11 04:04:42 overo devtmpfs: mounted
>
> Mar 11 04:04:42 overo Freeing init memory: 936K
>
> Mar 11 04:04:42 overo udev: starting version 151
>
> Mar 11 04:04:42 overo udev: renamed network interface eth0 to eth1
>
> Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial
>
> Mar 11 04:04:42 overo USB Serial support registered for generic
>
> Mar 11 04:04:42 overo usbcore: registered new interface driver
> usbserial_generic
>
> Mar 11 04:04:42 overo usbserial: USB Serial Driver core
>
> Mar 11 04:04:42 overo ads7846 spi1.0: touchscreen, irq 274
>
> Mar 11 04:04:42 overo ads7846 spi1.0: no device detected, test read
> result was 0x00000000
>
> Mar 11 04:04:42 overo USB Serial support registered for GSM modem (1-port)
>
> Mar 11 04:04:42 overo usbcore: registered new interface driver option
>
> Mar 11 04:04:42 overo option: v0.7.2:USB Driver for GSM modems
>
> Mar 11 04:04:42 overo NET: Registered protocol family 10
>
> Mar 11 04:04:42 overo ntpd[837]: ntpd 4.2.4p7@1.1607 Thu Sep  9 23:45:54
> UTC 2010 (1)
>
> Mar 11 04:04:42 overo ntpd[838]: precision = 30.000 usec
>
> Mar 11 04:04:42 overo ntpd[838]: Listening on interface #0 wildcard,
> 0.0.0.0#123 Disabled
>
> Mar 11 04:04:42 overo ntpd[838]: Listening on interface #1 wildcard,
> ::#123 Disabled
>
> Mar 11 04:04:42 overo ntpd[838]: Listening on interface #2 lo, ::1#123
> Enabled
>
> Mar 11 04:04:42 overo ntpd[838]: Listening on interface #3 lo,
> 127.0.0.1#123 Enabled
>
> Mar 11 04:04:42 overo ntpd[838]: kernel time sync status 0040
>
> Mar 11 04:04:42 overo ntpd[838]: frequency initialized 0.000 PPM from
> /etc/ntp.drift
>
> Mar 11 04:07:58 overo ntpd[838]: synchronized to LOCAL(0), stratum 14
>
> Mar 11 04:07:58 overo ntpd[838]: kernel time sync status change 0001
>
> Mar 11 04:09:43 overo ntpd[838]: failed to initialize interface for
> address fe80::215:c9ff:fe28:d9c1
>
> Mar 11 04:09:43 overo ntpd[838]: Listening on interface #5 eth1,
> 192.168.50.110#123 Enabled
>
> Mar 11 04:14:41 overo syslog-ng[818]: Log statistics;
> processed='center(queued)=1515', processed='center(received)=326',
> processed='destination(messages)=214',
> processed='destination(mailinfo)=0',
> processed='destination(mailwarn)=0', processed='destination(console)=0',
> processed='destination(ppp)=0', processed='destination(authlog)=2',
> processed='destination(user)=0', processed='destination(lpr)=0',
> processed='destination(daemon)=16', processed='destination(uucp)=0',
> processed='destination(cron)=0', processed='destination(kern)=307',
> processed='destination(console_all)=326',
> processed='destination(mail)=0', processed='destination(xconsole)=0',
> processed='destination(debug)=324', processed='destination(syslog)=326',
> processed='destination(newserr)=0', processed='destination(newscrit)=0',
> processed='destination(newsnotice)=0',
> processed='destination(mailerr)=0', processed='source(src)=326',
> processed='source(net)=0'
>
> Mar 11 04:14:43 overo ntpd[838]: failed to initialize interface for
> address fe80::215:c9ff:fe28:d9c1
>
>
>
> ------------------------------------------------------------------------------
> Colocation vs. Managed Hosting
> A question and answer guide to determining the best fit
> for your organization - today and in the future.
> http://p.sf.net/sfu/internap-sfd2d
>
>
>
> _______________________________________________
> gumstix-users mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/gumstix-users


------------------------------------------------------------------------------
Colocation vs. Managed Hosting
A question and answer guide to determining the best fit
for your organization - today and in the future.
http://p.sf.net/sfu/internap-sfd2d
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users
Reply | Threaded
Open this post in threaded view
|

Re: Wireless not found on stock image.

Alan Brumley-3
I get a:
wlan0: unknown interface: No such device

sorry for the delay.  I was out of town on a family vacation.

This is with the /etc/network/interfaces as shown below.


Do you know of a command where I can verify the kernel has seen the actual
wifi hardware?


-----Original Message-----
From: Neil MacMunn [mailto:[hidden email]]
Sent: Monday, March 14, 2011 6:54 PM
To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Wireless not found on stock image.

Try ifconfig wlan0 up.

I've had a similar problem with ifup in the past.

--
Neil


On 11-03-10 08:35 PM, Alan Brumley wrote:

> I apologize in advance for regurgitating so much information, I'm just
> trying to help speed things along.
>
> I've looked for a two nights now and can't find a solution to unstick me
> on this problem.  Thanks for any help you can give.
>
> I have an overo fire and a tobi board.  It just arrived from gumstix
> last week and is running the factory firmware that came with it.
>
> I'm trying to use the wired ethernet controller as well as the wifi
> controller.
>
> Out of the box, the wired connection seems to be happy as eth1
>
> eth1      Link encap:Ethernet  HWaddr 00:15:C9:28:D9:C1
>
>            inet addr:192.168.50.110  Bcast:192.168.50.255
> Mask:255.255.255.0
>
> The problem is getting the wifi up.   I've modified my
> /etc/network/interfaces as shown below but when I try
>
> "ifup wlan0"    I get the following error:
>
> Error for wireless request "Set Mode" (8B06) :
>
>      SET failed on device wlan0 ; No such device.
>
> Error for wireless request "Set ESSID" (8B1A) :
>
>      SET failed on device wlan0 ; No such device.
>
> SIOCSIFADDR: No such device
>
> wlan0: unknown interface: No such device
>
> SIOCSIFNETMASK: No such device
>
> SIOCGIFADDR: No such device
>
> SIOCSIFBROADCAST: No such device
>
> wlan0: unknown interface: No such device
>
> Failed to bring up wlan0.
>
> I am trying to join a simple non-encrypted ad-hoc network w/ static IPs.
>
> I have the following modules loaded on a clean boot:
>
> root@overo:~# lsmod
>
> Module                  Size  Used by
>
> bufferclass_ti          3555  0
>
> omaplfb                 8304  0
>
> pvrsrvkm              126292  2 bufferclass_ti,omaplfb
>
> ipv6                  219860  18
>
> option                 16236  0
>
> ads7846                 8515  0
>
> usbserial              30552  1 option
>
> root@overo:~#
>
> I've also tried modprobing various other apparent wifi modules as I
> could find, but none seemed to help.
>
> ------------------------------------------------------------
>
> here is my interfaces file.
>
> /etc/network/interfaces
>
> root@overo:~# cat /etc/network/interfaces
>
> # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
>
> # The loopback interface
>
> #
>
> auto lo
>
> iface lo inet loopback
>
> #
>
> # Wired interfaces
>
> #
>
> #auto eth0
>
> #iface eth0 inet dhcp
>
> #iface eth1 inet dhcp
>
> #
>
> # Wireless interfaces
>
> #
>
> # Example of an unencrypted (no WEP or WPA) wireless connection
>
> # that connects to any available access point:
>
> #
>
> allow-hotplug wlan0
>
> auto wlan0
>
> iface wlan0 inet static
>
> address 192.168.2.2
>
> netmask 255.255.255.0
>
> wireless-mode ad-hoc
>
> wireless-essid gumstix-network
>
> #allow-hotplug wlan0
>
> #iface wlan0 inet static
>
> #       wireless_mode ad-hoc
>
> #       wireless_essid HSMM-MESH
>
> #       address 10.10.11.22
>
> #       netmask 255.0.0.0
>
> #       network 10.0.0.0
>
> # Example of an unencrypted (no WEP or WPA) wireless connection
>
> <SNIP>   I can promise that every line after is a comment line and the
> stock file.
>
> I thought this device was available over usb, but when I run
>
> root@overo:~# lsusb -t
>
> Bus#  2
>
> `-Dev#   1 Vendor 0x1d6b Product 0x0002
>
> Bus#  1
>
> `-Dev#   1 Vendor 0x1d6b Product 0x0002
>
> root@overo:~#
>
> there's nothing there.
>
> I do have a blue and green LED lit however.
>
> Here are my start up messages.
>
> root@overo:~# cat /var/log/messages
>
> Mar 11 04:04:41 overo Linux version 2.6.34 ([hidden email]) (gcc
> version 4.3.3 (GCC) ) #1 Wed Oct 20 10:22:48 PDT 2010
>
> Mar 11 04:04:41 overo CPU: ARMv7 Processor [411fc083] revision 3
> (ARMv7), cr=10c53c7f
>
> Mar 11 04:04:41 overo CPU: VIPT nonaliasing data cache, VIPT nonaliasing
> instruction cache
>
> Mar 11 04:04:41 overo Machine: Gumstix Overo
>
> Mar 11 04:04:41 overo Memory policy: ECC disabled, Data cache writeback
>
> Mar 11 04:04:41 overo syslog-ng[818]: syslog-ng starting up;
version='2.0.5'

>
> Mar 11 04:04:41 overo OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
>
> Mar 11 04:04:41 overo SRAM: Mapped pa 0x40200000 to va 0xfe400000 size:
> 0x100000
>
> Mar 11 04:04:41 overo Reserving 12582912 bytes SDRAM for VRAM
>
> Mar 11 04:04:41 overo Built 1 zonelists in Zone order, mobility grouping
> on.  Total pages: 65024
>
> Mar 11 04:04:41 overo Kernel command line: console=ttyS2,115200n8
> mpurate=500 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y
> omapdss.def_disp=dvi root=/dev/mtdblock4 rw rootfstype=jffs2
>
> Mar 11 04:04:41 overo PID hash table entries: 1024 (order: 0, 4096 bytes)
>
> Mar 11 04:04:41 overo Dentry cache hash table entries: 32768 (order: 5,
> 131072 bytes)
>
> Mar 11 04:04:41 overo Inode-cache hash table entries: 16384 (order: 4,
> 65536 bytes)
>
> Mar 11 04:04:41 overo Memory: 128MB 128MB = 256MB total
>
> Mar 11 04:04:41 overo Memory: 240920k/240920k available, 21224k
> reserved, 0K highmem
>
> Mar 11 04:04:41 overo Virtual kernel memory layout:
>
> Mar 11 04:04:41 overo vector  : 0xffff0000 - 0xffff1000   (   4 kB)
>
> Mar 11 04:04:41 overo fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
>
> Mar 11 04:04:41 overo DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
>
> Mar 11 04:04:41 overo vmalloc : 0xd0800000 - 0xf8000000   ( 632 MB)
>
> Mar 11 04:04:41 overo lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
>
> Mar 11 04:04:41 overo modules : 0xbf000000 - 0xc0000000   (  16 MB)
>
> Mar 11 04:04:41 overo .init : 0xc0008000 - 0xc00f2000   ( 936 kB)
>
> Mar 11 04:04:41 overo .text : 0xc00f2000 - 0xc05f6000   (5136 kB)
>
> Mar 11 04:04:41 overo .data : 0xc061a000 - 0xc0659400   ( 253 kB)
>
> Mar 11 04:04:41 overo Hierarchical RCU implementation.
>
> Mar 11 04:04:41 overo NR_IRQS:402
>
> Mar 11 04:04:41 overo Clocking rate (Crystal/Core/MPU): 26.0/224/500 MHz
>
> Mar 11 04:04:41 overo Reprogramming SDRC clock to 224791666 Hz
>
> Mar 11 04:04:41 overo GPMC revision 5.0
>
> Mar 11 04:04:41 overo IRQ: Found an INTC at 0xfa200000 (revision 4.0)
> with 96 interrupts
>
> Mar 11 04:04:41 overo Total of 96 interrupts on 1 active controller
>
> Mar 11 04:04:41 overo OMAP GPIO hardware version 2.5
>
> Mar 11 04:04:41 overo OMAP clockevent source: GPTIMER1 at 32768 Hz
>
> Mar 11 04:04:41 overo Console: colour dummy device 80x30
>
> Mar 11 04:04:41 overo Calibrating delay loop... 499.92 BogoMIPS
> (lpj=1949696)
>
> Mar 11 04:04:41 overo Mount-cache hash table entries: 512
>
> Mar 11 04:04:41 overo CPU: Testing write buffer coherency: ok
>
> Mar 11 04:04:41 overo devtmpfs: initialized
>
> Mar 11 04:04:41 overo regulator: core version 0.5
>
> Mar 11 04:04:41 overo NET: Registered protocol family 16
>
> Mar 11 04:04:41 overo Found NAND on CS0
>
> Mar 11 04:04:41 overo hw perfevents: enabled with ARMv7 Cortex-A8 PMU
> driver, 5 counters available
>
> Mar 11 04:04:41 overo Switched to new clocking rate (Crystal/Core/MPU):
> 26.0/500/224 MHz
>
> Mar 11 04:04:41 overo OMAP DMA hardware revision 4.0
>
> Mar 11 04:04:41 overo bio: create slab <bio-0> at 0
>
> Mar 11 04:04:41 overo SCSI subsystem initialized
>
> Mar 11 04:04:41 overo usbcore: registered new interface driver usbfs
>
> Mar 11 04:04:41 overo usbcore: registered new interface driver hub
>
> Mar 11 04:04:41 overo usbcore: registered new device driver usb
>
> Mar 11 04:04:41 overo i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
>
> Mar 11 04:04:41 overo twl4030: PIH (irq 7) chaining IRQs 368..375
>
> Mar 11 04:04:41 overo twl4030: power (irq 373) chaining IRQs 376..383
>
> Mar 11 04:04:41 overo twl4030: gpio (irq 368) chaining IRQs 384..401
>
> Mar 11 04:04:41 overo regulator: VUSB1V5: 1500 mV normal standby
>
> Mar 11 04:04:41 overo regulator: VUSB1V8: 1800 mV normal standby
>
> Mar 11 04:04:41 overo regulator: VUSB3V1: 3100 mV normal standby
>
> Mar 11 04:04:41 overo twl4030_usb twl4030_usb: Initialized TWL4030 USB
> module
>
> Mar 11 04:04:41 overo regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV
> normal standby
>
> Mar 11 04:04:41 overo regulator: VDAC: 1800 mV normal standby
>
> Mar 11 04:04:41 overo regulator: VDVI: 1800 mV normal standby
>
> Mar 11 04:04:41 overo i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
>
> Mar 11 04:04:41 overo Advanced Linux Sound Architecture Driver Version
> 1.0.22.1.
>
> Mar 11 04:04:41 overo Bluetooth: Core ver 2.15
>
> Mar 11 04:04:41 overo NET: Registered protocol family 31
>
> Mar 11 04:04:41 overo Bluetooth: HCI device and connection manager
> initialized
>
> Mar 11 04:04:41 overo Bluetooth: HCI socket layer initialized
>
> Mar 11 04:04:41 overo cfg80211: Calling CRDA to update world regulatory
> domain
>
> Mar 11 04:04:41 overo Switching to clocksource 32k_counter
>
> Mar 11 04:04:41 overo musb_hdrc: version 6.0, musb-dma, host, debug=0
>
> Mar 11 04:04:41 overo musb_hdrc musb_hdrc: MUSB HDRC host driver
>
> Mar 11 04:04:42 overo musb_hdrc musb_hdrc: new USB bus registered,
> assigned bus number 1
>
> Mar 11 04:04:42 overo usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0002
>
> Mar 11 04:04:42 overo usb usb1: New USB device strings: Mfr=3,
> Product=2, SerialNumber=1
>
> Mar 11 04:04:42 overo usb usb1: Product: MUSB HDRC host driver
>
> Mar 11 04:04:42 overo usb usb1: Manufacturer: Linux 2.6.34 musb-hcd
>
> Mar 11 04:04:42 overo usb usb1: SerialNumber: musb_hdrc
>
> Mar 11 04:04:42 overo hub 1-0:1.0: USB hub found
>
> Mar 11 04:04:42 overo hub 1-0:1.0: 1 port detected
>
> Mar 11 04:04:42 overo musb_hdrc musb_hdrc: USB Host mode controller at
> fa0ab000 using DMA, IRQ 92
>
> Mar 11 04:04:42 overo NET: Registered protocol family 2
>
> Mar 11 04:04:42 overo IP route cache hash table entries: 2048 (order: 1,
> 8192 bytes)
>
> Mar 11 04:04:42 overo TCP established hash table entries: 8192 (order:
> 4, 65536 bytes)
>
> Mar 11 04:04:42 overo TCP bind hash table entries: 8192 (order: 3, 32768
> bytes)
>
> Mar 11 04:04:42 overo TCP: Hash tables configured (established 8192 bind
> 8192)
>
> Mar 11 04:04:42 overo TCP reno registered
>
> Mar 11 04:04:42 overo UDP hash table entries: 256 (order: 0, 4096 bytes)
>
> Mar 11 04:04:42 overo UDP-Lite hash table entries: 256 (order: 0, 4096
> bytes)
>
> Mar 11 04:04:42 overo NET: Registered protocol family 1
>
> Mar 11 04:04:42 overo RPC: Registered udp transport module.
>
> Mar 11 04:04:42 overo RPC: Registered tcp transport module.
>
> Mar 11 04:04:42 overo RPC: Registered tcp NFSv4.1 backchannel transport
> module.
>
> Mar 11 04:04:42 overo VFS: Disk quotas dquot_6.5.2
>
> Mar 11 04:04:42 overo Dquot-cache hash table entries: 1024 (order 0,
> 4096 bytes)
>
> Mar 11 04:04:42 overo JFFS2 version 2.2. (NAND) (SUMMARY)  Â© 2001-2006
> Red Hat, Inc.
>
> Mar 11 04:04:42 overo msgmni has been set to 470
>
> Mar 11 04:04:42 overo alg: No test for stdrng (krng)
>
> Mar 11 04:04:42 overo Block layer SCSI generic (bsg) driver version 0.4
> loaded (major 253)
>
> Mar 11 04:04:42 overo io scheduler noop registered
>
> Mar 11 04:04:42 overo io scheduler deadline registered
>
> Mar 11 04:04:42 overo io scheduler cfq registered (default)
>
> Mar 11 04:04:42 overo OMAP DSS rev 2.0
>
> Mar 11 04:04:42 overo OMAP DISPC rev 3.0
>
> Mar 11 04:04:42 overo OMAP VENC rev 2
>
> Mar 11 04:04:42 overo OMAP DSI rev 1.0
>
> Mar 11 04:04:42 overo Serial: 8250/16550 driver, 4 ports, IRQ sharing
> enabled
>
> Mar 11 04:04:42 overo serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72)
> is a ST16654
>
> Mar 11 04:04:42 overo serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73)
> is a ST16654
>
> Mar 11 04:04:42 overo serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74)
> is a ST16654
>
> Mar 11 04:04:42 overo console [ttyS2] enabled
>
> Mar 11 04:04:42 overo brd: module loaded
>
> Mar 11 04:04:42 overo loop: module loaded
>
> Mar 11 04:04:42 overo omap2-nand driver initializing
>
> Mar 11 04:04:42 overo NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba
> (Micron NAND 256MiB 1,8V 16-bit)
>
> Mar 11 04:04:42 overo cmdlinepart partition parsing not available
>
> Mar 11 04:04:42 overo Creating 5 MTD partitions on "omap2-nand.0":
>
> Mar 11 04:04:42 overo 0x000000000000-0x000000080000 : "xloader"
>
> Mar 11 04:04:42 overo 0x000000080000-0x000000240000 : "uboot"
>
> Mar 11 04:04:42 overo 0x000000240000-0x000000280000 : "uboot environment"
>
> Mar 11 04:04:42 overo 0x000000280000-0x000000680000 : "linux"
>
> Mar 11 04:04:42 overo 0x000000680000-0x000010000000 : "rootfs"
>
> Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.
>
> Mar 11 04:04:42 overo smsc911x-mdio: probed
>
> Mar 11 04:04:42 overo eth0: attached PHY driver [Generic PHY]
> (mii_bus:phy_addr=0:01, irq=-1)
>
> Mar 11 04:04:42 overo net eth0: MAC Address: 00:15:c9:28:d9:c1
>
> Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.
>
> Mar 11 04:04:42 overo usbcore: registered new interface driver asix
>
> Mar 11 04:04:42 overo usbcore: registered new interface driver cdc_ether
>
> Mar 11 04:04:42 overo ehci_hcd: USB 2.0 'Enhanced' Host Controller
> (EHCI) Driver
>
> Mar 11 04:04:42 overo ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
>
> Mar 11 04:04:42 overo ehci-omap ehci-omap.0: new USB bus registered,
> assigned bus number 2
>
> Mar 11 04:04:42 overo ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
>
> Mar 11 04:04:42 overo ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
>
> Mar 11 04:04:42 overo usb usb2: New USB device found, idVendor=1d6b,
> idProduct=0002
>
> Mar 11 04:04:42 overo usb usb2: New USB device strings: Mfr=3,
> Product=2, SerialNumber=1
>
> Mar 11 04:04:42 overo usb usb2: Product: OMAP-EHCI Host Controller
>
> Mar 11 04:04:42 overo usb usb2: Manufacturer: Linux 2.6.34 ehci_hcd
>
> Mar 11 04:04:42 overo usb usb2: SerialNumber: ehci-omap.0
>
> Mar 11 04:04:42 overo hub 2-0:1.0: USB hub found
>
> Mar 11 04:04:42 overo hub 2-0:1.0: 3 ports detected
>
> Mar 11 04:04:42 overo Initializing USB Mass Storage driver...
>
> Mar 11 04:04:42 overo usbcore: registered new interface driver usb-storage
>
> Mar 11 04:04:42 overo USB Mass Storage support registered.
>
> Mar 11 04:04:42 overo udc: OMAP UDC driver, version: 4 October 2004
> (iso) (dma)
>
> Mar 11 04:04:42 overo mice: PS/2 mouse device common for all mice
>
> Mar 11 04:04:42 overo twl_rtc twl_rtc: rtc core: registered twl_rtc as
rtc0

>
> Mar 11 04:04:42 overo i2c /dev entries driver
>
> Mar 11 04:04:42 overo OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
>
> Mar 11 04:04:42 overo twl4030_wdt: probe of twl4030_wdt failed with
> error -16
>
> Mar 11 04:04:42 overo Bluetooth: HCI UART driver ver 2.2
>
> Mar 11 04:04:42 overo Bluetooth: HCI H4 protocol initialized
>
> Mar 11 04:04:42 overo Bluetooth: HCI BCSP protocol initialized
>
> Mar 11 04:04:42 overo Bluetooth: HCILL protocol initialized
>
> Mar 11 04:04:42 overo usbcore: registered new interface driver usbhid
>
> Mar 11 04:04:42 overo usbhid: USB HID core driver
>
> Mar 11 04:04:42 overo usbcore: registered new interface driver
snd-usb-audio

>
> Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-0
>
> Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-1
>
> Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-2
>
> Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-3
>
> Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-4
>
> Mar 11 04:04:42 overo overo SoC init
>
> Mar 11 04:04:42 overo asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
>
> Mar 11 04:04:42 overo ALSA device list:
>
> Mar 11 04:04:42 overo #0: overo (twl4030)
>
> Mar 11 04:04:42 overo oprofile: using arm/armv7
>
> Mar 11 04:04:42 overo TCP cubic registered
>
> Mar 11 04:04:42 overo NET: Registered protocol family 17
>
> Mar 11 04:04:42 overo NET: Registered protocol family 15
>
> Mar 11 04:04:42 overo Bluetooth: L2CAP ver 2.14
>
> Mar 11 04:04:42 overo Bluetooth: L2CAP socket layer initialized
>
> Mar 11 04:04:42 overo Bluetooth: SCO (Voice Link) ver 0.6
>
> Mar 11 04:04:42 overo Bluetooth: SCO socket layer initialized
>
> Mar 11 04:04:42 overo Bluetooth: RFCOMM TTY layer initialized
>
> Mar 11 04:04:42 overo Bluetooth: RFCOMM socket layer initialized
>
> Mar 11 04:04:42 overo Bluetooth: RFCOMM ver 1.11
>
> Mar 11 04:04:42 overo Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>
> Mar 11 04:04:42 overo Bluetooth: BNEP filters: protocol multicast
>
> Mar 11 04:04:42 overo Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>
> Mar 11 04:04:42 overo ThumbEE CPU extension supported.
>
> Mar 11 04:04:42 overo VFP support v0.3: implementor 41 architecture 3
> part 30 variant c rev 1
>
> Mar 11 04:04:42 overo fbcvt: 1024x768@60: CVT Name - .786M3-R
>
> Mar 11 04:04:42 overo Console: switching to colour frame buffer device
> 128x48
>
> Mar 11 04:04:42 overo regulator_init_complete: incomplete constraints,
> leaving VDAC on
>
> Mar 11 04:04:42 overo twl_rtc twl_rtc: setting system clock to
> 2011-03-11 04:04:25 UTC (1299816265)
>
> Mar 11 04:04:42 overo JFFS2 notice: (1) jffs2_build_xattr_subsystem:
> complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan)
> and 0 of xref (0 dead, 0 orphan) found.
>
> Mar 11 04:04:42 overo VFS: Mounted root (jffs2 filesystem) on device 31:4.
>
> Mar 11 04:04:42 overo devtmpfs: mounted
>
> Mar 11 04:04:42 overo Freeing init memory: 936K
>
> Mar 11 04:04:42 overo udev: starting version 151
>
> Mar 11 04:04:42 overo udev: renamed network interface eth0 to eth1
>
> Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial
>
> Mar 11 04:04:42 overo USB Serial support registered for generic
>
> Mar 11 04:04:42 overo usbcore: registered new interface driver
> usbserial_generic
>
> Mar 11 04:04:42 overo usbserial: USB Serial Driver core
>
> Mar 11 04:04:42 overo ads7846 spi1.0: touchscreen, irq 274
>
> Mar 11 04:04:42 overo ads7846 spi1.0: no device detected, test read
> result was 0x00000000
>
> Mar 11 04:04:42 overo USB Serial support registered for GSM modem (1-port)
>
> Mar 11 04:04:42 overo usbcore: registered new interface driver option
>
> Mar 11 04:04:42 overo option: v0.7.2:USB Driver for GSM modems
>
> Mar 11 04:04:42 overo NET: Registered protocol family 10
>
> Mar 11 04:04:42 overo ntpd[837]: ntpd 4.2.4p7@1.1607 Thu Sep  9 23:45:54
> UTC 2010 (1)
>
> Mar 11 04:04:42 overo ntpd[838]: precision = 30.000 usec
>
> Mar 11 04:04:42 overo ntpd[838]: Listening on interface #0 wildcard,
> 0.0.0.0#123 Disabled
>
> Mar 11 04:04:42 overo ntpd[838]: Listening on interface #1 wildcard,
> ::#123 Disabled
>
> Mar 11 04:04:42 overo ntpd[838]: Listening on interface #2 lo, ::1#123
> Enabled
>
> Mar 11 04:04:42 overo ntpd[838]: Listening on interface #3 lo,
> 127.0.0.1#123 Enabled
>
> Mar 11 04:04:42 overo ntpd[838]: kernel time sync status 0040
>
> Mar 11 04:04:42 overo ntpd[838]: frequency initialized 0.000 PPM from
> /etc/ntp.drift
>
> Mar 11 04:07:58 overo ntpd[838]: synchronized to LOCAL(0), stratum 14
>
> Mar 11 04:07:58 overo ntpd[838]: kernel time sync status change 0001
>
> Mar 11 04:09:43 overo ntpd[838]: failed to initialize interface for
> address fe80::215:c9ff:fe28:d9c1
>
> Mar 11 04:09:43 overo ntpd[838]: Listening on interface #5 eth1,
> 192.168.50.110#123 Enabled
>
> Mar 11 04:14:41 overo syslog-ng[818]: Log statistics;
> processed='center(queued)=1515', processed='center(received)=326',
> processed='destination(messages)=214',
> processed='destination(mailinfo)=0',
> processed='destination(mailwarn)=0', processed='destination(console)=0',
> processed='destination(ppp)=0', processed='destination(authlog)=2',
> processed='destination(user)=0', processed='destination(lpr)=0',
> processed='destination(daemon)=16', processed='destination(uucp)=0',
> processed='destination(cron)=0', processed='destination(kern)=307',
> processed='destination(console_all)=326',
> processed='destination(mail)=0', processed='destination(xconsole)=0',
> processed='destination(debug)=324', processed='destination(syslog)=326',
> processed='destination(newserr)=0', processed='destination(newscrit)=0',
> processed='destination(newsnotice)=0',
> processed='destination(mailerr)=0', processed='source(src)=326',
> processed='source(net)=0'
>
> Mar 11 04:14:43 overo ntpd[838]: failed to initialize interface for
> address fe80::215:c9ff:fe28:d9c1
>
>
>
>
----------------------------------------------------------------------------
--

> Colocation vs. Managed Hosting
> A question and answer guide to determining the best fit
> for your organization - today and in the future.
> http://p.sf.net/sfu/internap-sfd2d
>
>
>
> _______________________________________________
> gumstix-users mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/gumstix-users


----------------------------------------------------------------------------
--
Colocation vs. Managed Hosting
A question and answer guide to determining the best fit
for your organization - today and in the future.
http://p.sf.net/sfu/internap-sfd2d
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users


------------------------------------------------------------------------------
Colocation vs. Managed Hosting
A question and answer guide to determining the best fit
for your organization - today and in the future.
http://p.sf.net/sfu/internap-sfd2d
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users
Reply | Threaded
Open this post in threaded view
|

Re: Wireless not found on stock image.

Steven
I think you can do a lsmod and modprobe -l | grep libertas to see if the wifi driver is installed.  If not you can try flashing a newer stable image and see if wireless works.

On Fri, Mar 18, 2011 at 11:45 PM, Alan Brumley <[hidden email]> wrote:
I get a:
wlan0: unknown interface: No such device

sorry for the delay.  I was out of town on a family vacation.

This is with the /etc/network/interfaces as shown below.


Do you know of a command where I can verify the kernel has seen the actual
wifi hardware?


-----Original Message-----
From: Neil MacMunn [mailto:[hidden email]]
Sent: Monday, March 14, 2011 6:54 PM
To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Wireless not found on stock image.

Try ifconfig wlan0 up.

I've had a similar problem with ifup in the past.

--
Neil


On 11-03-10 08:35 PM, Alan Brumley wrote:
> I apologize in advance for regurgitating so much information, I'm just
> trying to help speed things along.
>
> I've looked for a two nights now and can't find a solution to unstick me
> on this problem.  Thanks for any help you can give.
>
> I have an overo fire and a tobi board.  It just arrived from gumstix
> last week and is running the factory firmware that came with it.
>
> I'm trying to use the wired ethernet controller as well as the wifi
> controller.
>
> Out of the box, the wired connection seems to be happy as eth1
>
> eth1      Link encap:Ethernet  HWaddr 00:15:C9:28:D9:C1

------------------------------------------------------------------------------
Colocation vs. Managed Hosting
A question and answer guide to determining the best fit
for your organization - today and in the future.
http://p.sf.net/sfu/internap-sfd2d
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users
Reply | Threaded
Open this post in threaded view
|

Re: Wireless not found on stock image.

Alan Brumley-3

I've got libertas loaded (and it pulled along another module in the dir with it) and I've still got nothing.

 

I've run the latest desktop development image and I still get the same error messages relating to missing hardware.

 

I even hooked up a mouse and keyboard and used the GUI to configure the WIFI, but ifup wlan0 or ifconfig wlan0 up both throw similar errors.

 

Any last suggestions before sending this back?

 

 

 

From: Steven [mailto:[hidden email]]
Sent: Saturday, March 19, 2011 12:46 AM
To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Wireless not found on stock image.

 

I think you can do a lsmod and modprobe -l | grep libertas to see if the wifi driver is installed.  If not you can try flashing a newer stable image and see if wireless works.

On Fri, Mar 18, 2011 at 11:45 PM, Alan Brumley <[hidden email]> wrote:

I get a:
wlan0: unknown interface: No such device

sorry for the delay.  I was out of town on a family vacation.

This is with the /etc/network/interfaces as shown below.


Do you know of a command where I can verify the kernel has seen the actual
wifi hardware?


-----Original Message-----
From: Neil MacMunn [mailto:[hidden email]]
Sent: Monday, March 14, 2011 6:54 PM
To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Wireless not found on stock image.

Try ifconfig wlan0 up.

I've had a similar problem with ifup in the past.

--
Neil


On 11-03-10 08:35 PM, Alan Brumley wrote:


> I apologize in advance for regurgitating so much information, I'm just
> trying to help speed things along.
>
> I've looked for a two nights now and can't find a solution to unstick me
> on this problem.  Thanks for any help you can give.
>
> I have an overo fire and a tobi board.  It just arrived from gumstix
> last week and is running the factory firmware that came with it.
>
> I'm trying to use the wired ethernet controller as well as the wifi
> controller.
>
> Out of the box, the wired connection seems to be happy as eth1
>
> eth1      Link encap:Ethernet  HWaddr 00:15:C9:28:D9:C1

------------------------------------------------------------------------------
Colocation vs. Managed Hosting
A question and answer guide to determining the best fit
for your organization - today and in the future.
http://p.sf.net/sfu/internap-sfd2d
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users
Reply | Threaded
Open this post in threaded view
|

Re: Wireless not found on stock image.

Steven
What does iwconfig (no arguments) say.

It seems you don't have lib80211 module installed. Try the stable omap3-console-image, i am pretty sure that one should have all the correct modules installed.

On Mon, Mar 21, 2011 at 1:56 PM, Alan Brumley <[hidden email]> wrote:

I've got libertas loaded (and it pulled along another module in the dir with it) and I've still got nothing.

 

I've run the latest desktop development image and I still get the same error messages relating to missing hardware.

 

I even hooked up a mouse and keyboard and used the GUI to configure the WIFI, but ifup wlan0 or ifconfig wlan0 up both throw similar errors.

 

Any last suggestions before sending this back?

 

 

 

From: Steven [mailto:[hidden email]]
Sent: Saturday, March 19, 2011 12:46 AM


To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Wireless not found on stock image.

 

I think you can do a lsmod and modprobe -l | grep libertas to see if the wifi driver is installed.  If not you can try flashing a newer stable image and see if wireless works.

On Fri, Mar 18, 2011 at 11:45 PM, Alan Brumley <[hidden email]> wrote:

I get a:
wlan0: unknown interface: No such device

sorry for the delay.  I was out of town on a family vacation.

This is with the /etc/network/interfaces as shown below.


Do you know of a command where I can verify the kernel has seen the actual
wifi hardware?


-----Original Message-----
From: Neil MacMunn [mailto:[hidden email]]
Sent: Monday, March 14, 2011 6:54 PM
To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Wireless not found on stock image.

Try ifconfig wlan0 up.

I've had a similar problem with ifup in the past.

--
Neil


On 11-03-10 08:35 PM, Alan Brumley wrote:
> I apologize in advance for regurgitating so much information, I'm just
> trying to help speed things along.
>
> I've looked for a two nights now and can't find a solution to unstick me
> on this problem.  Thanks for any help you can give.
>
> I have an overo fire and a tobi board.  It just arrived from gumstix
> last week and is running the factory firmware that came with it.
>
> I'm trying to use the wired ethernet controller as well as the wifi
> controller.
>
> Out of the box, the wired connection seems to be happy as eth1
>
> eth1      Link encap:Ethernet  HWaddr 00:15:C9:28:D9:C1


------------------------------------------------------------------------------
Colocation vs. Managed Hosting
A question and answer guide to determining the best fit
for your organization - today and in the future.
http://p.sf.net/sfu/internap-sfd2d
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users



------------------------------------------------------------------------------
Enable your software for Intel(R) Active Management Technology to meet the
growing manageability and security demands of your customers. Businesses
are taking advantage of Intel(R) vPro (TM) technology - will your software
be a part of the solution? Download the Intel(R) Manageability Checker
today! http://p.sf.net/sfu/intel-dev2devmar
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users
Reply | Threaded
Open this post in threaded view
|

Re: Wireless not found on stock image.

Alan Brumley-3

Thanks for the help, lib80211 is also loaded.

I really think I got a bad solder job.   I've also noticed that the wifi chip isn't seated perfectly flat on the PCB.  

If you run your finger across the chip, you can definitely feel that the edge closer to the LED's is higher up than the opposite edge.  Of course that's using the chip next to it as a reference.

 

Anyway, I know somebody with another Overo with wifi and I'm taking my SD card over there and going to boot to it.  I'm pretty sure it'll work.   I've run the latest development build as well as the factory NAND and they both didn't work out of the box (after the obvious /etc/network/interfaces changes)

 

I've already got my RMA ## so it's going back as soon as I prove this image I have is workable on other overos.

 

 

 

From: [hidden email] [mailto:[hidden email]] On Behalf Of Steven
Sent: Monday, March 21, 2011 4:10 PM
To: General mailing list for gumstix users.
Cc: Alan Brumley
Subject: Re: [Gumstix-users] Wireless not found on stock image.

 

What does iwconfig (no arguments) say.

 

It seems you don't have lib80211 module installed. Try the stable omap3-console-image, i am pretty sure that one should have all the correct modules installed.

 

On Mon, Mar 21, 2011 at 1:56 PM, Alan Brumley <[hidden email]> wrote:

I've got libertas loaded (and it pulled along another module in the dir with it) and I've still got nothing.

 

I've run the latest desktop development image and I still get the same error messages relating to missing hardware.

 

I even hooked up a mouse and keyboard and used the GUI to configure the WIFI, but ifup wlan0 or ifconfig wlan0 up both throw similar errors.

 

Any last suggestions before sending this back?

 

 

 

From: Steven [mailto:[hidden email]]
Sent: Saturday, March 19, 2011 12:46 AM


To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Wireless not found on stock image.

 

I think you can do a lsmod and modprobe -l | grep libertas to see if the wifi driver is installed.  If not you can try flashing a newer stable image and see if wireless works.

On Fri, Mar 18, 2011 at 11:45 PM, Alan Brumley <[hidden email]> wrote:

I get a:
wlan0: unknown interface: No such device

sorry for the delay.  I was out of town on a family vacation.

This is with the /etc/network/interfaces as shown below.


Do you know of a command where I can verify the kernel has seen the actual
wifi hardware?


-----Original Message-----
From: Neil MacMunn [mailto:[hidden email]]
Sent: Monday, March 14, 2011 6:54 PM
To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Wireless not found on stock image.

Try ifconfig wlan0 up.

I've had a similar problem with ifup in the past.

--
Neil


On 11-03-10 08:35 PM, Alan Brumley wrote:


> I apologize in advance for regurgitating so much information, I'm just
> trying to help speed things along.
>
> I've looked for a two nights now and can't find a solution to unstick me
> on this problem.  Thanks for any help you can give.
>
> I have an overo fire and a tobi board.  It just arrived from gumstix
> last week and is running the factory firmware that came with it.
>
> I'm trying to use the wired ethernet controller as well as the wifi
> controller.
>
> Out of the box, the wired connection seems to be happy as eth1
>
> eth1      Link encap:Ethernet  HWaddr 00:15:C9:28:D9:C1

------------------------------------------------------------------------------
Colocation vs. Managed Hosting
A question and answer guide to determining the best fit
for your organization - today and in the future.
http://p.sf.net/sfu/internap-sfd2d
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users

 


------------------------------------------------------------------------------
Enable your software for Intel(R) Active Management Technology to meet the
growing manageability and security demands of your customers. Businesses
are taking advantage of Intel(R) vPro (TM) technology - will your software
be a part of the solution? Download the Intel(R) Manageability Checker
today! http://p.sf.net/sfu/intel-dev2devmar
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users
Reply | Threaded
Open this post in threaded view
|

Re: Wireless not found on stock image.

Alan Brumley-3
In reply to this post by Alan Brumley-3

I found somebody with another Overo system with Wifi.

My SD card boots fine and detects wlan0 on his system, so unless running on a chesnut somehow "enables" wifi where it's "disabled" on a Tobi it seems I have a bad gumstix.

 

 

From: Alan Brumley [mailto:[hidden email]]
Sent: Thursday, March 10, 2011 10:35 PM
To: [hidden email]
Subject: [Gumstix-users] Wireless not found on stock image.

 

 

I apologize in advance for regurgitating so much information, I'm just trying to help speed things along.

I've looked for a two nights now and can't find a solution to unstick me on this problem.  Thanks for any help you can give.

 

I have an overo fire and a tobi board.  It just arrived from gumstix last week and is running the factory firmware that came with it.

 

I'm trying to use the wired ethernet controller as well as the wifi controller.

 

Out of the box, the wired connection seems to be happy as eth1

eth1      Link encap:Ethernet  HWaddr 00:15:C9:28:D9:C1

          inet addr:192.168.50.110  Bcast:192.168.50.255  Mask:255.255.255.0

 

The problem is getting the wifi up.   I've modified my /etc/network/interfaces as shown below but when I try

 

"ifup wlan0"    I get the following error:

Error for wireless request "Set Mode" (8B06) :

    SET failed on device wlan0 ; No such device.

Error for wireless request "Set ESSID" (8B1A) :

    SET failed on device wlan0 ; No such device.

SIOCSIFADDR: No such device

wlan0: unknown interface: No such device

SIOCSIFNETMASK: No such device

SIOCGIFADDR: No such device

SIOCSIFBROADCAST: No such device

wlan0: unknown interface: No such device

Failed to bring up wlan0.

 

I am trying to join a simple non-encrypted ad-hoc network w/ static IPs.

 

 

I have the following modules loaded on a clean boot:

root@overo:~# lsmod

Module                  Size  Used by

bufferclass_ti          3555  0

omaplfb                 8304  0

pvrsrvkm              126292  2 bufferclass_ti,omaplfb

ipv6                  219860  18

option                 16236  0

ads7846                 8515  0

usbserial              30552  1 option

root@overo:~#

 

I've also tried modprobing various other apparent wifi modules as I could find, but none seemed to help.

------------------------------------------------------------

here is my interfaces file.

 

/etc/network/interfaces

root@overo:~# cat /etc/network/interfaces

# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

 

# The loopback interface

#

auto lo

iface lo inet loopback

 

#

# Wired interfaces

#

 

#auto eth0

#iface eth0 inet dhcp

#iface eth1 inet dhcp

 

#

# Wireless interfaces

#

 

# Example of an unencrypted (no WEP or WPA) wireless connection

# that connects to any available access point:

#

 

allow-hotplug wlan0

auto wlan0

iface wlan0 inet static

address 192.168.2.2

netmask 255.255.255.0

wireless-mode ad-hoc

wireless-essid gumstix-network

 

#allow-hotplug wlan0

#iface wlan0 inet static

#       wireless_mode ad-hoc

#       wireless_essid HSMM-MESH

#       address 10.10.11.22

#       netmask 255.0.0.0

#       network 10.0.0.0

 

# Example of an unencrypted (no WEP or WPA) wireless connection

<SNIP>   I can promise that every line after is a comment line and the stock file.

 

I thought this device was available over usb, but when I run

root@overo:~# lsusb -t

Bus#  2

`-Dev#   1 Vendor 0x1d6b Product 0x0002

Bus#  1

`-Dev#   1 Vendor 0x1d6b Product 0x0002

root@overo:~#

 

there's nothing there.

I do have a blue and green LED lit however.

 

Here are my start up messages.

root@overo:~# cat /var/log/messages

Mar 11 04:04:41 overo Linux version 2.6.34 ([hidden email]) (gcc version 4.3.3 (GCC) ) #1 Wed Oct 20 10:22:48 PDT 2010

Mar 11 04:04:41 overo CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f

Mar 11 04:04:41 overo CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache

Mar 11 04:04:41 overo Machine: Gumstix Overo

Mar 11 04:04:41 overo Memory policy: ECC disabled, Data cache writeback

Mar 11 04:04:41 overo syslog-ng[818]: syslog-ng starting up; version='2.0.5'

Mar 11 04:04:41 overo OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )

Mar 11 04:04:41 overo SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000

Mar 11 04:04:41 overo Reserving 12582912 bytes SDRAM for VRAM

Mar 11 04:04:41 overo Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024

Mar 11 04:04:41 overo Kernel command line: console=ttyS2,115200n8 mpurate=500 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi root=/dev/mtdblock4 rw rootfstype=jffs2

Mar 11 04:04:41 overo PID hash table entries: 1024 (order: 0, 4096 bytes)

Mar 11 04:04:41 overo Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Mar 11 04:04:41 overo Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Mar 11 04:04:41 overo Memory: 128MB 128MB = 256MB total

Mar 11 04:04:41 overo Memory: 240920k/240920k available, 21224k reserved, 0K highmem

Mar 11 04:04:41 overo Virtual kernel memory layout:

Mar 11 04:04:41 overo vector  : 0xffff0000 - 0xffff1000   (   4 kB)

Mar 11 04:04:41 overo fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

Mar 11 04:04:41 overo DMA     : 0xffc00000 - 0xffe00000   (   2 MB)

Mar 11 04:04:41 overo vmalloc : 0xd0800000 - 0xf8000000   ( 632 MB)

Mar 11 04:04:41 overo lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)

Mar 11 04:04:41 overo modules : 0xbf000000 - 0xc0000000   (  16 MB)

Mar 11 04:04:41 overo .init : 0xc0008000 - 0xc00f2000   ( 936 kB)

Mar 11 04:04:41 overo .text : 0xc00f2000 - 0xc05f6000   (5136 kB)

Mar 11 04:04:41 overo .data : 0xc061a000 - 0xc0659400   ( 253 kB)

Mar 11 04:04:41 overo Hierarchical RCU implementation.

Mar 11 04:04:41 overo NR_IRQS:402

Mar 11 04:04:41 overo Clocking rate (Crystal/Core/MPU): 26.0/224/500 MHz

Mar 11 04:04:41 overo Reprogramming SDRC clock to 224791666 Hz

Mar 11 04:04:41 overo GPMC revision 5.0

Mar 11 04:04:41 overo IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts

Mar 11 04:04:41 overo Total of 96 interrupts on 1 active controller

Mar 11 04:04:41 overo OMAP GPIO hardware version 2.5

Mar 11 04:04:41 overo OMAP clockevent source: GPTIMER1 at 32768 Hz

Mar 11 04:04:41 overo Console: colour dummy device 80x30

Mar 11 04:04:41 overo Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696)

Mar 11 04:04:41 overo Mount-cache hash table entries: 512

Mar 11 04:04:41 overo CPU: Testing write buffer coherency: ok

Mar 11 04:04:41 overo devtmpfs: initialized

Mar 11 04:04:41 overo regulator: core version 0.5

Mar 11 04:04:41 overo NET: Registered protocol family 16

Mar 11 04:04:41 overo Found NAND on CS0

Mar 11 04:04:41 overo hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available

Mar 11 04:04:41 overo Switched to new clocking rate (Crystal/Core/MPU): 26.0/500/224 MHz

Mar 11 04:04:41 overo OMAP DMA hardware revision 4.0

Mar 11 04:04:41 overo bio: create slab <bio-0> at 0

Mar 11 04:04:41 overo SCSI subsystem initialized

Mar 11 04:04:41 overo usbcore: registered new interface driver usbfs

Mar 11 04:04:41 overo usbcore: registered new interface driver hub

Mar 11 04:04:41 overo usbcore: registered new device driver usb

Mar 11 04:04:41 overo i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz

Mar 11 04:04:41 overo twl4030: PIH (irq 7) chaining IRQs 368..375

Mar 11 04:04:41 overo twl4030: power (irq 373) chaining IRQs 376..383

Mar 11 04:04:41 overo twl4030: gpio (irq 368) chaining IRQs 384..401

Mar 11 04:04:41 overo regulator: VUSB1V5: 1500 mV normal standby

Mar 11 04:04:41 overo regulator: VUSB1V8: 1800 mV normal standby

Mar 11 04:04:41 overo regulator: VUSB3V1: 3100 mV normal standby

Mar 11 04:04:41 overo twl4030_usb twl4030_usb: Initialized TWL4030 USB module

Mar 11 04:04:41 overo regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby

Mar 11 04:04:41 overo regulator: VDAC: 1800 mV normal standby

Mar 11 04:04:41 overo regulator: VDVI: 1800 mV normal standby

Mar 11 04:04:41 overo i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz

Mar 11 04:04:41 overo Advanced Linux Sound Architecture Driver Version 1.0.22.1.

Mar 11 04:04:41 overo Bluetooth: Core ver 2.15

Mar 11 04:04:41 overo NET: Registered protocol family 31

Mar 11 04:04:41 overo Bluetooth: HCI device and connection manager initialized

Mar 11 04:04:41 overo Bluetooth: HCI socket layer initialized

Mar 11 04:04:41 overo cfg80211: Calling CRDA to update world regulatory domain

Mar 11 04:04:41 overo Switching to clocksource 32k_counter

Mar 11 04:04:41 overo musb_hdrc: version 6.0, musb-dma, host, debug=0

Mar 11 04:04:41 overo musb_hdrc musb_hdrc: MUSB HDRC host driver

Mar 11 04:04:42 overo musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1

Mar 11 04:04:42 overo usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

Mar 11 04:04:42 overo usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Mar 11 04:04:42 overo usb usb1: Product: MUSB HDRC host driver

Mar 11 04:04:42 overo usb usb1: Manufacturer: Linux 2.6.34 musb-hcd

Mar 11 04:04:42 overo usb usb1: SerialNumber: musb_hdrc

Mar 11 04:04:42 overo hub 1-0:1.0: USB hub found

Mar 11 04:04:42 overo hub 1-0:1.0: 1 port detected

Mar 11 04:04:42 overo musb_hdrc musb_hdrc: USB Host mode controller at fa0ab000 using DMA, IRQ 92

Mar 11 04:04:42 overo NET: Registered protocol family 2

Mar 11 04:04:42 overo IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

Mar 11 04:04:42 overo TCP established hash table entries: 8192 (order: 4, 65536 bytes)

Mar 11 04:04:42 overo TCP bind hash table entries: 8192 (order: 3, 32768 bytes)

Mar 11 04:04:42 overo TCP: Hash tables configured (established 8192 bind 8192)

Mar 11 04:04:42 overo TCP reno registered

Mar 11 04:04:42 overo UDP hash table entries: 256 (order: 0, 4096 bytes)

Mar 11 04:04:42 overo UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

Mar 11 04:04:42 overo NET: Registered protocol family 1

Mar 11 04:04:42 overo RPC: Registered udp transport module.

Mar 11 04:04:42 overo RPC: Registered tcp transport module.

Mar 11 04:04:42 overo RPC: Registered tcp NFSv4.1 backchannel transport module.

Mar 11 04:04:42 overo VFS: Disk quotas dquot_6.5.2

Mar 11 04:04:42 overo Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

Mar 11 04:04:42 overo JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Mar 11 04:04:42 overo msgmni has been set to 470

Mar 11 04:04:42 overo alg: No test for stdrng (krng)

Mar 11 04:04:42 overo Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

Mar 11 04:04:42 overo io scheduler noop registered

Mar 11 04:04:42 overo io scheduler deadline registered

Mar 11 04:04:42 overo io scheduler cfq registered (default)

Mar 11 04:04:42 overo OMAP DSS rev 2.0

Mar 11 04:04:42 overo OMAP DISPC rev 3.0

Mar 11 04:04:42 overo OMAP VENC rev 2

Mar 11 04:04:42 overo OMAP DSI rev 1.0

Mar 11 04:04:42 overo Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

Mar 11 04:04:42 overo serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654

Mar 11 04:04:42 overo serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654

Mar 11 04:04:42 overo serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654

Mar 11 04:04:42 overo console [ttyS2] enabled

Mar 11 04:04:42 overo brd: module loaded

Mar 11 04:04:42 overo loop: module loaded

Mar 11 04:04:42 overo omap2-nand driver initializing

Mar 11 04:04:42 overo NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)

Mar 11 04:04:42 overo cmdlinepart partition parsing not available

Mar 11 04:04:42 overo Creating 5 MTD partitions on "omap2-nand.0":

Mar 11 04:04:42 overo 0x000000000000-0x000000080000 : "xloader"

Mar 11 04:04:42 overo 0x000000080000-0x000000240000 : "uboot"

Mar 11 04:04:42 overo 0x000000240000-0x000000280000 : "uboot environment"

Mar 11 04:04:42 overo 0x000000280000-0x000000680000 : "linux"

Mar 11 04:04:42 overo 0x000000680000-0x000010000000 : "rootfs"

Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.

Mar 11 04:04:42 overo smsc911x-mdio: probed

Mar 11 04:04:42 overo eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)

Mar 11 04:04:42 overo net eth0: MAC Address: 00:15:c9:28:d9:c1

Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.

Mar 11 04:04:42 overo usbcore: registered new interface driver asix

Mar 11 04:04:42 overo usbcore: registered new interface driver cdc_ether

Mar 11 04:04:42 overo ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

Mar 11 04:04:42 overo ehci-omap ehci-omap.0: OMAP-EHCI Host Controller

Mar 11 04:04:42 overo ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2

Mar 11 04:04:42 overo ehci-omap ehci-omap.0: irq 77, io mem 0x48064800

Mar 11 04:04:42 overo ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00

Mar 11 04:04:42 overo usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

Mar 11 04:04:42 overo usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Mar 11 04:04:42 overo usb usb2: Product: OMAP-EHCI Host Controller

Mar 11 04:04:42 overo usb usb2: Manufacturer: Linux 2.6.34 ehci_hcd

Mar 11 04:04:42 overo usb usb2: SerialNumber: ehci-omap.0

Mar 11 04:04:42 overo hub 2-0:1.0: USB hub found

Mar 11 04:04:42 overo hub 2-0:1.0: 3 ports detected

Mar 11 04:04:42 overo Initializing USB Mass Storage driver...

Mar 11 04:04:42 overo usbcore: registered new interface driver usb-storage

Mar 11 04:04:42 overo USB Mass Storage support registered.

Mar 11 04:04:42 overo udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)

Mar 11 04:04:42 overo mice: PS/2 mouse device common for all mice

Mar 11 04:04:42 overo twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0

Mar 11 04:04:42 overo i2c /dev entries driver

Mar 11 04:04:42 overo OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec

Mar 11 04:04:42 overo twl4030_wdt: probe of twl4030_wdt failed with error -16

Mar 11 04:04:42 overo Bluetooth: HCI UART driver ver 2.2

Mar 11 04:04:42 overo Bluetooth: HCI H4 protocol initialized

Mar 11 04:04:42 overo Bluetooth: HCI BCSP protocol initialized

Mar 11 04:04:42 overo Bluetooth: HCILL protocol initialized

Mar 11 04:04:42 overo usbcore: registered new interface driver usbhid

Mar 11 04:04:42 overo usbhid: USB HID core driver

Mar 11 04:04:42 overo usbcore: registered new interface driver snd-usb-audio

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-0

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-1

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-2

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-3

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-4

Mar 11 04:04:42 overo overo SoC init

Mar 11 04:04:42 overo asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok

Mar 11 04:04:42 overo ALSA device list:

Mar 11 04:04:42 overo #0: overo (twl4030)

Mar 11 04:04:42 overo oprofile: using arm/armv7

Mar 11 04:04:42 overo TCP cubic registered

Mar 11 04:04:42 overo NET: Registered protocol family 17

Mar 11 04:04:42 overo NET: Registered protocol family 15

Mar 11 04:04:42 overo Bluetooth: L2CAP ver 2.14

Mar 11 04:04:42 overo Bluetooth: L2CAP socket layer initialized

Mar 11 04:04:42 overo Bluetooth: SCO (Voice Link) ver 0.6

Mar 11 04:04:42 overo Bluetooth: SCO socket layer initialized

Mar 11 04:04:42 overo Bluetooth: RFCOMM TTY layer initialized

Mar 11 04:04:42 overo Bluetooth: RFCOMM socket layer initialized

Mar 11 04:04:42 overo Bluetooth: RFCOMM ver 1.11

Mar 11 04:04:42 overo Bluetooth: BNEP (Ethernet Emulation) ver 1.3

Mar 11 04:04:42 overo Bluetooth: BNEP filters: protocol multicast

Mar 11 04:04:42 overo Bluetooth: HIDP (Human Interface Emulation) ver 1.2

Mar 11 04:04:42 overo ThumbEE CPU extension supported.

Mar 11 04:04:42 overo VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1

Mar 11 04:04:42 overo fbcvt: 1024x768@60: CVT Name - .786M3-R

Mar 11 04:04:42 overo Console: switching to colour frame buffer device 128x48

Mar 11 04:04:42 overo regulator_init_complete: incomplete constraints, leaving VDAC on

Mar 11 04:04:42 overo twl_rtc twl_rtc: setting system clock to 2011-03-11 04:04:25 UTC (1299816265)

Mar 11 04:04:42 overo JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

Mar 11 04:04:42 overo VFS: Mounted root (jffs2 filesystem) on device 31:4.

Mar 11 04:04:42 overo devtmpfs: mounted

Mar 11 04:04:42 overo Freeing init memory: 936K

Mar 11 04:04:42 overo udev: starting version 151

Mar 11 04:04:42 overo udev: renamed network interface eth0 to eth1

Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial

Mar 11 04:04:42 overo USB Serial support registered for generic

Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial_generic

Mar 11 04:04:42 overo usbserial: USB Serial Driver core

Mar 11 04:04:42 overo ads7846 spi1.0: touchscreen, irq 274

Mar 11 04:04:42 overo ads7846 spi1.0: no device detected, test read result was 0x00000000

Mar 11 04:04:42 overo USB Serial support registered for GSM modem (1-port)

Mar 11 04:04:42 overo usbcore: registered new interface driver option

Mar 11 04:04:42 overo option: v0.7.2:USB Driver for GSM modems

Mar 11 04:04:42 overo NET: Registered protocol family 10

Mar 11 04:04:42 overo ntpd[837]: ntpd 4.2.4p7@1.1607 Thu Sep  9 23:45:54 UTC 2010 (1)

Mar 11 04:04:42 overo ntpd[838]: precision = 30.000 usec

Mar 11 04:04:42 overo ntpd[838]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled

Mar 11 04:04:42 overo ntpd[838]: Listening on interface #1 wildcard, ::#123 Disabled

Mar 11 04:04:42 overo ntpd[838]: Listening on interface #2 lo, ::1#123 Enabled

Mar 11 04:04:42 overo ntpd[838]: Listening on interface #3 lo, 127.0.0.1#123 Enabled

Mar 11 04:04:42 overo ntpd[838]: kernel time sync status 0040

Mar 11 04:04:42 overo ntpd[838]: frequency initialized 0.000 PPM from /etc/ntp.drift

Mar 11 04:07:58 overo ntpd[838]: synchronized to LOCAL(0), stratum 14

Mar 11 04:07:58 overo ntpd[838]: kernel time sync status change 0001

Mar 11 04:09:43 overo ntpd[838]: failed to initialize interface for address fe80::215:c9ff:fe28:d9c1

Mar 11 04:09:43 overo ntpd[838]: Listening on interface #5 eth1, 192.168.50.110#123 Enabled

Mar 11 04:14:41 overo syslog-ng[818]: Log statistics; processed='center(queued)=1515', processed='center(received)=326', processed='destination(messages)=214', processed='destination(mailinfo)=0', processed='destination(mailwarn)=0', processed='destination(console)=0', processed='destination(ppp)=0', processed='destination(authlog)=2', processed='destination(user)=0', processed='destination(lpr)=0', processed='destination(daemon)=16', processed='destination(uucp)=0', processed='destination(cron)=0', processed='destination(kern)=307', processed='destination(console_all)=326', processed='destination(mail)=0', processed='destination(xconsole)=0', processed='destination(debug)=324', processed='destination(syslog)=326', processed='destination(newserr)=0', processed='destination(newscrit)=0', processed='destination(newsnotice)=0', processed='destination(mailerr)=0', processed='source(src)=326', processed='source(net)=0'

Mar 11 04:14:43 overo ntpd[838]: failed to initialize interface for address fe80::215:c9ff:fe28:d9c1

 

 

 

 


------------------------------------------------------------------------------
Enable your software for Intel(R) Active Management Technology to meet the
growing manageability and security demands of your customers. Businesses
are taking advantage of Intel(R) vPro (TM) technology - will your software
be a part of the solution? Download the Intel(R) Manageability Checker
today! http://p.sf.net/sfu/intel-dev2devmar
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users
Reply | Threaded
Open this post in threaded view
|

Re: Wireless not found on stock image.

Kevin Kowalewski
Seems that way. Warranty that stuff if you're still within the warranty period.

Thanks,
Kevin

On Tue, Mar 22, 2011 at 5:26 PM, Alan Brumley <[hidden email]> wrote:

I found somebody with another Overo system with Wifi.

My SD card boots fine and detects wlan0 on his system, so unless running on a chesnut somehow "enables" wifi where it's "disabled" on a Tobi it seems I have a bad gumstix.

 

 

From: Alan Brumley [mailto:[hidden email]]
Sent: Thursday, March 10, 2011 10:35 PM
To: [hidden email]
Subject: [Gumstix-users] Wireless not found on stock image.

 

 

I apologize in advance for regurgitating so much information, I'm just trying to help speed things along.

I've looked for a two nights now and can't find a solution to unstick me on this problem.  Thanks for any help you can give.

 

I have an overo fire and a tobi board.  It just arrived from gumstix last week and is running the factory firmware that came with it.

 

I'm trying to use the wired ethernet controller as well as the wifi controller.

 

Out of the box, the wired connection seems to be happy as eth1

eth1      Link encap:Ethernet  HWaddr 00:15:C9:28:D9:C1

          inet addr:192.168.50.110  Bcast:192.168.50.255  Mask:255.255.255.0

 

The problem is getting the wifi up.   I've modified my /etc/network/interfaces as shown below but when I try

 

"ifup wlan0"    I get the following error:

Error for wireless request "Set Mode" (8B06) :

    SET failed on device wlan0 ; No such device.

Error for wireless request "Set ESSID" (8B1A) :

    SET failed on device wlan0 ; No such device.

SIOCSIFADDR: No such device

wlan0: unknown interface: No such device

SIOCSIFNETMASK: No such device

SIOCGIFADDR: No such device

SIOCSIFBROADCAST: No such device

wlan0: unknown interface: No such device

Failed to bring up wlan0.

 

I am trying to join a simple non-encrypted ad-hoc network w/ static IPs.

 

 

I have the following modules loaded on a clean boot:

root@overo:~# lsmod

Module                  Size  Used by

bufferclass_ti          3555  0

omaplfb                 8304  0

pvrsrvkm              126292  2 bufferclass_ti,omaplfb

ipv6                  219860  18

option                 16236  0

ads7846                 8515  0

usbserial              30552  1 option

root@overo:~#

 

I've also tried modprobing various other apparent wifi modules as I could find, but none seemed to help.

------------------------------------------------------------

here is my interfaces file.

 

/etc/network/interfaces

root@overo:~# cat /etc/network/interfaces

# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

 

# The loopback interface

#

auto lo

iface lo inet loopback

 

#

# Wired interfaces

#

 

#auto eth0

#iface eth0 inet dhcp

#iface eth1 inet dhcp

 

#

# Wireless interfaces

#

 

# Example of an unencrypted (no WEP or WPA) wireless connection

# that connects to any available access point:

#

 

allow-hotplug wlan0

auto wlan0

iface wlan0 inet static

address 192.168.2.2

netmask 255.255.255.0

wireless-mode ad-hoc

wireless-essid gumstix-network

 

#allow-hotplug wlan0

#iface wlan0 inet static

#       wireless_mode ad-hoc

#       wireless_essid HSMM-MESH

#       address 10.10.11.22

#       netmask 255.0.0.0

#       network 10.0.0.0

 

# Example of an unencrypted (no WEP or WPA) wireless connection

<SNIP>   I can promise that every line after is a comment line and the stock file.

 

I thought this device was available over usb, but when I run

root@overo:~# lsusb -t

Bus#  2

`-Dev#   1 Vendor 0x1d6b Product 0x0002

Bus#  1

`-Dev#   1 Vendor 0x1d6b Product 0x0002

root@overo:~#

 

there's nothing there.

I do have a blue and green LED lit however.

 

Here are my start up messages.

root@overo:~# cat /var/log/messages

Mar 11 04:04:41 overo Linux version 2.6.34 ([hidden email]) (gcc version 4.3.3 (GCC) ) #1 Wed Oct 20 10:22:48 PDT 2010

Mar 11 04:04:41 overo CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f

Mar 11 04:04:41 overo CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache

Mar 11 04:04:41 overo Machine: Gumstix Overo

Mar 11 04:04:41 overo Memory policy: ECC disabled, Data cache writeback

Mar 11 04:04:41 overo syslog-ng[818]: syslog-ng starting up; version='2.0.5'

Mar 11 04:04:41 overo OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )

Mar 11 04:04:41 overo SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000

Mar 11 04:04:41 overo Reserving 12582912 bytes SDRAM for VRAM

Mar 11 04:04:41 overo Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024

Mar 11 04:04:41 overo Kernel command line: console=ttyS2,115200n8 mpurate=500 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi root=/dev/mtdblock4 rw rootfstype=jffs2

Mar 11 04:04:41 overo PID hash table entries: 1024 (order: 0, 4096 bytes)

Mar 11 04:04:41 overo Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Mar 11 04:04:41 overo Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Mar 11 04:04:41 overo Memory: 128MB 128MB = 256MB total

Mar 11 04:04:41 overo Memory: 240920k/240920k available, 21224k reserved, 0K highmem

Mar 11 04:04:41 overo Virtual kernel memory layout:

Mar 11 04:04:41 overo vector  : 0xffff0000 - 0xffff1000   (   4 kB)

Mar 11 04:04:41 overo fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

Mar 11 04:04:41 overo DMA     : 0xffc00000 - 0xffe00000   (   2 MB)

Mar 11 04:04:41 overo vmalloc : 0xd0800000 - 0xf8000000   ( 632 MB)

Mar 11 04:04:41 overo lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)

Mar 11 04:04:41 overo modules : 0xbf000000 - 0xc0000000   (  16 MB)

Mar 11 04:04:41 overo .init : 0xc0008000 - 0xc00f2000   ( 936 kB)

Mar 11 04:04:41 overo .text : 0xc00f2000 - 0xc05f6000   (5136 kB)

Mar 11 04:04:41 overo .data : 0xc061a000 - 0xc0659400   ( 253 kB)

Mar 11 04:04:41 overo Hierarchical RCU implementation.

Mar 11 04:04:41 overo NR_IRQS:402

Mar 11 04:04:41 overo Clocking rate (Crystal/Core/MPU): 26.0/224/500 MHz

Mar 11 04:04:41 overo Reprogramming SDRC clock to 224791666 Hz

Mar 11 04:04:41 overo GPMC revision 5.0

Mar 11 04:04:41 overo IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts

Mar 11 04:04:41 overo Total of 96 interrupts on 1 active controller

Mar 11 04:04:41 overo OMAP GPIO hardware version 2.5

Mar 11 04:04:41 overo OMAP clockevent source: GPTIMER1 at 32768 Hz

Mar 11 04:04:41 overo Console: colour dummy device 80x30

Mar 11 04:04:41 overo Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696)

Mar 11 04:04:41 overo Mount-cache hash table entries: 512

Mar 11 04:04:41 overo CPU: Testing write buffer coherency: ok

Mar 11 04:04:41 overo devtmpfs: initialized

Mar 11 04:04:41 overo regulator: core version 0.5

Mar 11 04:04:41 overo NET: Registered protocol family 16

Mar 11 04:04:41 overo Found NAND on CS0

Mar 11 04:04:41 overo hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available

Mar 11 04:04:41 overo Switched to new clocking rate (Crystal/Core/MPU): 26.0/500/224 MHz

Mar 11 04:04:41 overo OMAP DMA hardware revision 4.0

Mar 11 04:04:41 overo bio: create slab <bio-0> at 0

Mar 11 04:04:41 overo SCSI subsystem initialized

Mar 11 04:04:41 overo usbcore: registered new interface driver usbfs

Mar 11 04:04:41 overo usbcore: registered new interface driver hub

Mar 11 04:04:41 overo usbcore: registered new device driver usb

Mar 11 04:04:41 overo i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz

Mar 11 04:04:41 overo twl4030: PIH (irq 7) chaining IRQs 368..375

Mar 11 04:04:41 overo twl4030: power (irq 373) chaining IRQs 376..383

Mar 11 04:04:41 overo twl4030: gpio (irq 368) chaining IRQs 384..401

Mar 11 04:04:41 overo regulator: VUSB1V5: 1500 mV normal standby

Mar 11 04:04:41 overo regulator: VUSB1V8: 1800 mV normal standby

Mar 11 04:04:41 overo regulator: VUSB3V1: 3100 mV normal standby

Mar 11 04:04:41 overo twl4030_usb twl4030_usb: Initialized TWL4030 USB module

Mar 11 04:04:41 overo regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby

Mar 11 04:04:41 overo regulator: VDAC: 1800 mV normal standby

Mar 11 04:04:41 overo regulator: VDVI: 1800 mV normal standby

Mar 11 04:04:41 overo i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz

Mar 11 04:04:41 overo Advanced Linux Sound Architecture Driver Version 1.0.22.1.

Mar 11 04:04:41 overo Bluetooth: Core ver 2.15

Mar 11 04:04:41 overo NET: Registered protocol family 31

Mar 11 04:04:41 overo Bluetooth: HCI device and connection manager initialized

Mar 11 04:04:41 overo Bluetooth: HCI socket layer initialized

Mar 11 04:04:41 overo cfg80211: Calling CRDA to update world regulatory domain

Mar 11 04:04:41 overo Switching to clocksource 32k_counter

Mar 11 04:04:41 overo musb_hdrc: version 6.0, musb-dma, host, debug=0

Mar 11 04:04:41 overo musb_hdrc musb_hdrc: MUSB HDRC host driver

Mar 11 04:04:42 overo musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1

Mar 11 04:04:42 overo usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

Mar 11 04:04:42 overo usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Mar 11 04:04:42 overo usb usb1: Product: MUSB HDRC host driver

Mar 11 04:04:42 overo usb usb1: Manufacturer: Linux 2.6.34 musb-hcd

Mar 11 04:04:42 overo usb usb1: SerialNumber: musb_hdrc

Mar 11 04:04:42 overo hub 1-0:1.0: USB hub found

Mar 11 04:04:42 overo hub 1-0:1.0: 1 port detected

Mar 11 04:04:42 overo musb_hdrc musb_hdrc: USB Host mode controller at fa0ab000 using DMA, IRQ 92

Mar 11 04:04:42 overo NET: Registered protocol family 2

Mar 11 04:04:42 overo IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

Mar 11 04:04:42 overo TCP established hash table entries: 8192 (order: 4, 65536 bytes)

Mar 11 04:04:42 overo TCP bind hash table entries: 8192 (order: 3, 32768 bytes)

Mar 11 04:04:42 overo TCP: Hash tables configured (established 8192 bind 8192)

Mar 11 04:04:42 overo TCP reno registered

Mar 11 04:04:42 overo UDP hash table entries: 256 (order: 0, 4096 bytes)

Mar 11 04:04:42 overo UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

Mar 11 04:04:42 overo NET: Registered protocol family 1

Mar 11 04:04:42 overo RPC: Registered udp transport module.

Mar 11 04:04:42 overo RPC: Registered tcp transport module.

Mar 11 04:04:42 overo RPC: Registered tcp NFSv4.1 backchannel transport module.

Mar 11 04:04:42 overo VFS: Disk quotas dquot_6.5.2

Mar 11 04:04:42 overo Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

Mar 11 04:04:42 overo JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Mar 11 04:04:42 overo msgmni has been set to 470

Mar 11 04:04:42 overo alg: No test for stdrng (krng)

Mar 11 04:04:42 overo Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

Mar 11 04:04:42 overo io scheduler noop registered

Mar 11 04:04:42 overo io scheduler deadline registered

Mar 11 04:04:42 overo io scheduler cfq registered (default)

Mar 11 04:04:42 overo OMAP DSS rev 2.0

Mar 11 04:04:42 overo OMAP DISPC rev 3.0

Mar 11 04:04:42 overo OMAP VENC rev 2

Mar 11 04:04:42 overo OMAP DSI rev 1.0

Mar 11 04:04:42 overo Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

Mar 11 04:04:42 overo serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654

Mar 11 04:04:42 overo serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654

Mar 11 04:04:42 overo serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654

Mar 11 04:04:42 overo console [ttyS2] enabled

Mar 11 04:04:42 overo brd: module loaded

Mar 11 04:04:42 overo loop: module loaded

Mar 11 04:04:42 overo omap2-nand driver initializing

Mar 11 04:04:42 overo NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)

Mar 11 04:04:42 overo cmdlinepart partition parsing not available

Mar 11 04:04:42 overo Creating 5 MTD partitions on "omap2-nand.0":

Mar 11 04:04:42 overo 0x000000000000-0x000000080000 : "xloader"

Mar 11 04:04:42 overo 0x000000080000-0x000000240000 : "uboot"

Mar 11 04:04:42 overo 0x000000240000-0x000000280000 : "uboot environment"

Mar 11 04:04:42 overo 0x000000280000-0x000000680000 : "linux"

Mar 11 04:04:42 overo 0x000000680000-0x000010000000 : "rootfs"

Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.

Mar 11 04:04:42 overo smsc911x-mdio: probed

Mar 11 04:04:42 overo eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)

Mar 11 04:04:42 overo net eth0: MAC Address: 00:15:c9:28:d9:c1

Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.

Mar 11 04:04:42 overo usbcore: registered new interface driver asix

Mar 11 04:04:42 overo usbcore: registered new interface driver cdc_ether

Mar 11 04:04:42 overo ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

Mar 11 04:04:42 overo ehci-omap ehci-omap.0: OMAP-EHCI Host Controller

Mar 11 04:04:42 overo ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2

Mar 11 04:04:42 overo ehci-omap ehci-omap.0: irq 77, io mem 0x48064800

Mar 11 04:04:42 overo ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00

Mar 11 04:04:42 overo usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

Mar 11 04:04:42 overo usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Mar 11 04:04:42 overo usb usb2: Product: OMAP-EHCI Host Controller

Mar 11 04:04:42 overo usb usb2: Manufacturer: Linux 2.6.34 ehci_hcd

Mar 11 04:04:42 overo usb usb2: SerialNumber: ehci-omap.0

Mar 11 04:04:42 overo hub 2-0:1.0: USB hub found

Mar 11 04:04:42 overo hub 2-0:1.0: 3 ports detected

Mar 11 04:04:42 overo Initializing USB Mass Storage driver...

Mar 11 04:04:42 overo usbcore: registered new interface driver usb-storage

Mar 11 04:04:42 overo USB Mass Storage support registered.

Mar 11 04:04:42 overo udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)

Mar 11 04:04:42 overo mice: PS/2 mouse device common for all mice

Mar 11 04:04:42 overo twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0

Mar 11 04:04:42 overo i2c /dev entries driver

Mar 11 04:04:42 overo OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec

Mar 11 04:04:42 overo twl4030_wdt: probe of twl4030_wdt failed with error -16

Mar 11 04:04:42 overo Bluetooth: HCI UART driver ver 2.2

Mar 11 04:04:42 overo Bluetooth: HCI H4 protocol initialized

Mar 11 04:04:42 overo Bluetooth: HCI BCSP protocol initialized

Mar 11 04:04:42 overo Bluetooth: HCILL protocol initialized

Mar 11 04:04:42 overo usbcore: registered new interface driver usbhid

Mar 11 04:04:42 overo usbhid: USB HID core driver

Mar 11 04:04:42 overo usbcore: registered new interface driver snd-usb-audio

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-0

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-1

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-2

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-3

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-4

Mar 11 04:04:42 overo overo SoC init

Mar 11 04:04:42 overo asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok

Mar 11 04:04:42 overo ALSA device list:

Mar 11 04:04:42 overo #0: overo (twl4030)

Mar 11 04:04:42 overo oprofile: using arm/armv7

Mar 11 04:04:42 overo TCP cubic registered

Mar 11 04:04:42 overo NET: Registered protocol family 17

Mar 11 04:04:42 overo NET: Registered protocol family 15

Mar 11 04:04:42 overo Bluetooth: L2CAP ver 2.14

Mar 11 04:04:42 overo Bluetooth: L2CAP socket layer initialized

Mar 11 04:04:42 overo Bluetooth: SCO (Voice Link) ver 0.6

Mar 11 04:04:42 overo Bluetooth: SCO socket layer initialized

Mar 11 04:04:42 overo Bluetooth: RFCOMM TTY layer initialized

Mar 11 04:04:42 overo Bluetooth: RFCOMM socket layer initialized

Mar 11 04:04:42 overo Bluetooth: RFCOMM ver 1.11

Mar 11 04:04:42 overo Bluetooth: BNEP (Ethernet Emulation) ver 1.3

Mar 11 04:04:42 overo Bluetooth: BNEP filters: protocol multicast

Mar 11 04:04:42 overo Bluetooth: HIDP (Human Interface Emulation) ver 1.2

Mar 11 04:04:42 overo ThumbEE CPU extension supported.

Mar 11 04:04:42 overo VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1

Mar 11 04:04:42 overo fbcvt: 1024x768@60: CVT Name - .786M3-R

Mar 11 04:04:42 overo Console: switching to colour frame buffer device 128x48

Mar 11 04:04:42 overo regulator_init_complete: incomplete constraints, leaving VDAC on

Mar 11 04:04:42 overo twl_rtc twl_rtc: setting system clock to 2011-03-11 04:04:25 UTC (1299816265)

Mar 11 04:04:42 overo JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

Mar 11 04:04:42 overo VFS: Mounted root (jffs2 filesystem) on device 31:4.

Mar 11 04:04:42 overo devtmpfs: mounted

Mar 11 04:04:42 overo Freeing init memory: 936K

Mar 11 04:04:42 overo udev: starting version 151

Mar 11 04:04:42 overo udev: renamed network interface eth0 to eth1

Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial

Mar 11 04:04:42 overo USB Serial support registered for generic

Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial_generic

Mar 11 04:04:42 overo usbserial: USB Serial Driver core

Mar 11 04:04:42 overo ads7846 spi1.0: touchscreen, irq 274

Mar 11 04:04:42 overo ads7846 spi1.0: no device detected, test read result was 0x00000000

Mar 11 04:04:42 overo USB Serial support registered for GSM modem (1-port)

Mar 11 04:04:42 overo usbcore: registered new interface driver option

Mar 11 04:04:42 overo option: v0.7.2:USB Driver for GSM modems

Mar 11 04:04:42 overo NET: Registered protocol family 10

Mar 11 04:04:42 overo ntpd[837]: ntpd 4.2.4p7@1.1607 Thu Sep  9 23:45:54 UTC 2010 (1)

Mar 11 04:04:42 overo ntpd[838]: precision = 30.000 usec

Mar 11 04:04:42 overo ntpd[838]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled

Mar 11 04:04:42 overo ntpd[838]: Listening on interface #1 wildcard, ::#123 Disabled

Mar 11 04:04:42 overo ntpd[838]: Listening on interface #2 lo, ::1#123 Enabled

Mar 11 04:04:42 overo ntpd[838]: Listening on interface #3 lo, 127.0.0.1#123 Enabled

Mar 11 04:04:42 overo ntpd[838]: kernel time sync status 0040

Mar 11 04:04:42 overo ntpd[838]: frequency initialized 0.000 PPM from /etc/ntp.drift

Mar 11 04:07:58 overo ntpd[838]: synchronized to LOCAL(0), stratum 14

Mar 11 04:07:58 overo ntpd[838]: kernel time sync status change 0001

Mar 11 04:09:43 overo ntpd[838]: failed to initialize interface for address fe80::215:c9ff:fe28:d9c1

Mar 11 04:09:43 overo ntpd[838]: Listening on interface #5 eth1, 192.168.50.110#123 Enabled

Mar 11 04:14:41 overo syslog-ng[818]: Log statistics; processed='center(queued)=1515', processed='center(received)=326', processed='destination(messages)=214', processed='destination(mailinfo)=0', processed='destination(mailwarn)=0', processed='destination(console)=0', processed='destination(ppp)=0', processed='destination(authlog)=2', processed='destination(user)=0', processed='destination(lpr)=0', processed='destination(daemon)=16', processed='destination(uucp)=0', processed='destination(cron)=0', processed='destination(kern)=307', processed='destination(console_all)=326', processed='destination(mail)=0', processed='destination(xconsole)=0', processed='destination(debug)=324', processed='destination(syslog)=326', processed='destination(newserr)=0', processed='destination(newscrit)=0', processed='destination(newsnotice)=0', processed='destination(mailerr)=0', processed='source(src)=326', processed='source(net)=0'

Mar 11 04:14:43 overo ntpd[838]: failed to initialize interface for address fe80::215:c9ff:fe28:d9c1

 

 

 

 


------------------------------------------------------------------------------
Enable your software for Intel(R) Active Management Technology to meet the
growing manageability and security demands of your customers. Businesses
are taking advantage of Intel(R) vPro (TM) technology - will your software
be a part of the solution? Download the Intel(R) Manageability Checker
today! http://p.sf.net/sfu/intel-dev2devmar
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users



------------------------------------------------------------------------------
Enable your software for Intel(R) Active Management Technology to meet the
growing manageability and security demands of your customers. Businesses
are taking advantage of Intel(R) vPro (TM) technology - will your software
be a part of the solution? Download the Intel(R) Manageability Checker
today! http://p.sf.net/sfu/intel-dev2devmar
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users
Reply | Threaded
Open this post in threaded view
|

Re: Wireless not found on stock image.

Alan Brumley-3
In reply to this post by Alan Brumley-3

So I've received my replacement gumstix and it has the same problem.  No wifi on boot.

I know, I know.  I wouldn't believe me either _EXCEPT_ I have another gumstix here I've borrowed and it works fine.

I have my image installed on an SD card and if I take the working setup and swap out my "broken" overo fire into the working setup (same SD image and expander board), I don't have wifi anymore.   However, now I have the luxury of capturing a working boot and a failed boot and diff'ing them.

Two things jump out...

My working setup I believe is an FE version because it's only running at 600Mhz.  My failed version is a Fire at 720MHz

However in the working setup, I see the entry:

mmc1: new SDIO card at address 0001

which isn't there in the failing boot.  

Obviously, all the libertas stuff is missing from the failed boot because it's not finding any relevant hardware.

 

Makes me think of two possabilities...

a timing issue in the kernel when running at 720Mhz, or a GPIO is getting set in uBoot that is holding the wifi in reset.

I'm having a hard time believing the timing issue just based on the number of people who have had success.

I can't find any documentation on how you would go about disabling wifi from within uboot, so I can't check that I am.  I never modified uBoot on either gumstix (the prevous failed, or current failed).

I saw instructions on how to enable/disable wireless in linux (via GPIO16), but nothing there seemed to make a difference.  i.e. kernel never seems to see it get inserted or removed.

 

Sorry for the book, but does anybody have any suggestions?

I've dropped the logs at http://www.onlinecnc.com/gumstix/ if you want to take a look.

 

Thanks for any help,

Alan

 

 

 

 

From: Alan Brumley [mailto:[hidden email]]
Sent: Thursday, March 10, 2011 10:35 PM
To: [hidden email]
Subject: [Gumstix-users] Wireless not found on stock image.

 

 

I apologize in advance for regurgitating so much information, I'm just trying to help speed things along.

I've looked for a two nights now and can't find a solution to unstick me on this problem.  Thanks for any help you can give.

 

I have an overo fire and a tobi board.  It just arrived from gumstix last week and is running the factory firmware that came with it.

 

I'm trying to use the wired ethernet controller as well as the wifi controller.

 

Out of the box, the wired connection seems to be happy as eth1

eth1      Link encap:Ethernet  HWaddr 00:15:C9:28:D9:C1

          inet addr:192.168.50.110  Bcast:192.168.50.255  Mask:255.255.255.0

 

The problem is getting the wifi up.   I've modified my /etc/network/interfaces as shown below but when I try

 

"ifup wlan0"    I get the following error:

Error for wireless request "Set Mode" (8B06) :

    SET failed on device wlan0 ; No such device.

Error for wireless request "Set ESSID" (8B1A) :

    SET failed on device wlan0 ; No such device.

SIOCSIFADDR: No such device

wlan0: unknown interface: No such device

SIOCSIFNETMASK: No such device

SIOCGIFADDR: No such device

SIOCSIFBROADCAST: No such device

wlan0: unknown interface: No such device

Failed to bring up wlan0.

 

I am trying to join a simple non-encrypted ad-hoc network w/ static IPs.

 

 

I have the following modules loaded on a clean boot:

root@overo:~# lsmod

Module                  Size  Used by

bufferclass_ti          3555  0

omaplfb                 8304  0

pvrsrvkm              126292  2 bufferclass_ti,omaplfb

ipv6                  219860  18

option                 16236  0

ads7846                 8515  0

usbserial              30552  1 option

root@overo:~#

 

I've also tried modprobing various other apparent wifi modules as I could find, but none seemed to help.

------------------------------------------------------------

here is my interfaces file.

 

/etc/network/interfaces

root@overo:~# cat /etc/network/interfaces

# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

 

# The loopback interface

#

auto lo

iface lo inet loopback

 

#

# Wired interfaces

#

 

#auto eth0

#iface eth0 inet dhcp

#iface eth1 inet dhcp

 

#

# Wireless interfaces

#

 

# Example of an unencrypted (no WEP or WPA) wireless connection

# that connects to any available access point:

#

 

allow-hotplug wlan0

auto wlan0

iface wlan0 inet static

address 192.168.2.2

netmask 255.255.255.0

wireless-mode ad-hoc

wireless-essid gumstix-network

 

#allow-hotplug wlan0

#iface wlan0 inet static

#       wireless_mode ad-hoc

#       wireless_essid HSMM-MESH

#       address 10.10.11.22

#       netmask 255.0.0.0

#       network 10.0.0.0

 

# Example of an unencrypted (no WEP or WPA) wireless connection

<SNIP>   I can promise that every line after is a comment line and the stock file.

 

I thought this device was available over usb, but when I run

root@overo:~# lsusb -t

Bus#  2

`-Dev#   1 Vendor 0x1d6b Product 0x0002

Bus#  1

`-Dev#   1 Vendor 0x1d6b Product 0x0002

root@overo:~#

 

there's nothing there.

I do have a blue and green LED lit however.

 

Here are my start up messages.

root@overo:~# cat /var/log/messages

Mar 11 04:04:41 overo Linux version 2.6.34 ([hidden email]) (gcc version 4.3.3 (GCC) ) #1 Wed Oct 20 10:22:48 PDT 2010

Mar 11 04:04:41 overo CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f

Mar 11 04:04:41 overo CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache

Mar 11 04:04:41 overo Machine: Gumstix Overo

Mar 11 04:04:41 overo Memory policy: ECC disabled, Data cache writeback

Mar 11 04:04:41 overo syslog-ng[818]: syslog-ng starting up; version='2.0.5'

Mar 11 04:04:41 overo OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )

Mar 11 04:04:41 overo SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000

Mar 11 04:04:41 overo Reserving 12582912 bytes SDRAM for VRAM

Mar 11 04:04:41 overo Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024

Mar 11 04:04:41 overo Kernel command line: console=ttyS2,115200n8 mpurate=500 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi root=/dev/mtdblock4 rw rootfstype=jffs2

Mar 11 04:04:41 overo PID hash table entries: 1024 (order: 0, 4096 bytes)

Mar 11 04:04:41 overo Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Mar 11 04:04:41 overo Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Mar 11 04:04:41 overo Memory: 128MB 128MB = 256MB total

Mar 11 04:04:41 overo Memory: 240920k/240920k available, 21224k reserved, 0K highmem

Mar 11 04:04:41 overo Virtual kernel memory layout:

Mar 11 04:04:41 overo vector  : 0xffff0000 - 0xffff1000   (   4 kB)

Mar 11 04:04:41 overo fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

Mar 11 04:04:41 overo DMA     : 0xffc00000 - 0xffe00000   (   2 MB)

Mar 11 04:04:41 overo vmalloc : 0xd0800000 - 0xf8000000   ( 632 MB)

Mar 11 04:04:41 overo lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)

Mar 11 04:04:41 overo modules : 0xbf000000 - 0xc0000000   (  16 MB)

Mar 11 04:04:41 overo .init : 0xc0008000 - 0xc00f2000   ( 936 kB)

Mar 11 04:04:41 overo .text : 0xc00f2000 - 0xc05f6000   (5136 kB)

Mar 11 04:04:41 overo .data : 0xc061a000 - 0xc0659400   ( 253 kB)

Mar 11 04:04:41 overo Hierarchical RCU implementation.

Mar 11 04:04:41 overo NR_IRQS:402

Mar 11 04:04:41 overo Clocking rate (Crystal/Core/MPU): 26.0/224/500 MHz

Mar 11 04:04:41 overo Reprogramming SDRC clock to 224791666 Hz

Mar 11 04:04:41 overo GPMC revision 5.0

Mar 11 04:04:41 overo IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts

Mar 11 04:04:41 overo Total of 96 interrupts on 1 active controller

Mar 11 04:04:41 overo OMAP GPIO hardware version 2.5

Mar 11 04:04:41 overo OMAP clockevent source: GPTIMER1 at 32768 Hz

Mar 11 04:04:41 overo Console: colour dummy device 80x30

Mar 11 04:04:41 overo Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696)

Mar 11 04:04:41 overo Mount-cache hash table entries: 512

Mar 11 04:04:41 overo CPU: Testing write buffer coherency: ok

Mar 11 04:04:41 overo devtmpfs: initialized

Mar 11 04:04:41 overo regulator: core version 0.5

Mar 11 04:04:41 overo NET: Registered protocol family 16

Mar 11 04:04:41 overo Found NAND on CS0

Mar 11 04:04:41 overo hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available

Mar 11 04:04:41 overo Switched to new clocking rate (Crystal/Core/MPU): 26.0/500/224 MHz

Mar 11 04:04:41 overo OMAP DMA hardware revision 4.0

Mar 11 04:04:41 overo bio: create slab <bio-0> at 0

Mar 11 04:04:41 overo SCSI subsystem initialized

Mar 11 04:04:41 overo usbcore: registered new interface driver usbfs

Mar 11 04:04:41 overo usbcore: registered new interface driver hub

Mar 11 04:04:41 overo usbcore: registered new device driver usb

Mar 11 04:04:41 overo i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz

Mar 11 04:04:41 overo twl4030: PIH (irq 7) chaining IRQs 368..375

Mar 11 04:04:41 overo twl4030: power (irq 373) chaining IRQs 376..383

Mar 11 04:04:41 overo twl4030: gpio (irq 368) chaining IRQs 384..401

Mar 11 04:04:41 overo regulator: VUSB1V5: 1500 mV normal standby

Mar 11 04:04:41 overo regulator: VUSB1V8: 1800 mV normal standby

Mar 11 04:04:41 overo regulator: VUSB3V1: 3100 mV normal standby

Mar 11 04:04:41 overo twl4030_usb twl4030_usb: Initialized TWL4030 USB module

Mar 11 04:04:41 overo regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby

Mar 11 04:04:41 overo regulator: VDAC: 1800 mV normal standby

Mar 11 04:04:41 overo regulator: VDVI: 1800 mV normal standby

Mar 11 04:04:41 overo i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz

Mar 11 04:04:41 overo Advanced Linux Sound Architecture Driver Version 1.0.22.1.

Mar 11 04:04:41 overo Bluetooth: Core ver 2.15

Mar 11 04:04:41 overo NET: Registered protocol family 31

Mar 11 04:04:41 overo Bluetooth: HCI device and connection manager initialized

Mar 11 04:04:41 overo Bluetooth: HCI socket layer initialized

Mar 11 04:04:41 overo cfg80211: Calling CRDA to update world regulatory domain

Mar 11 04:04:41 overo Switching to clocksource 32k_counter

Mar 11 04:04:41 overo musb_hdrc: version 6.0, musb-dma, host, debug=0

Mar 11 04:04:41 overo musb_hdrc musb_hdrc: MUSB HDRC host driver

Mar 11 04:04:42 overo musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1

Mar 11 04:04:42 overo usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

Mar 11 04:04:42 overo usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Mar 11 04:04:42 overo usb usb1: Product: MUSB HDRC host driver

Mar 11 04:04:42 overo usb usb1: Manufacturer: Linux 2.6.34 musb-hcd

Mar 11 04:04:42 overo usb usb1: SerialNumber: musb_hdrc

Mar 11 04:04:42 overo hub 1-0:1.0: USB hub found

Mar 11 04:04:42 overo hub 1-0:1.0: 1 port detected

Mar 11 04:04:42 overo musb_hdrc musb_hdrc: USB Host mode controller at fa0ab000 using DMA, IRQ 92

Mar 11 04:04:42 overo NET: Registered protocol family 2

Mar 11 04:04:42 overo IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

Mar 11 04:04:42 overo TCP established hash table entries: 8192 (order: 4, 65536 bytes)

Mar 11 04:04:42 overo TCP bind hash table entries: 8192 (order: 3, 32768 bytes)

Mar 11 04:04:42 overo TCP: Hash tables configured (established 8192 bind 8192)

Mar 11 04:04:42 overo TCP reno registered

Mar 11 04:04:42 overo UDP hash table entries: 256 (order: 0, 4096 bytes)

Mar 11 04:04:42 overo UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

Mar 11 04:04:42 overo NET: Registered protocol family 1

Mar 11 04:04:42 overo RPC: Registered udp transport module.

Mar 11 04:04:42 overo RPC: Registered tcp transport module.

Mar 11 04:04:42 overo RPC: Registered tcp NFSv4.1 backchannel transport module.

Mar 11 04:04:42 overo VFS: Disk quotas dquot_6.5.2

Mar 11 04:04:42 overo Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

Mar 11 04:04:42 overo JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

Mar 11 04:04:42 overo msgmni has been set to 470

Mar 11 04:04:42 overo alg: No test for stdrng (krng)

Mar 11 04:04:42 overo Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

Mar 11 04:04:42 overo io scheduler noop registered

Mar 11 04:04:42 overo io scheduler deadline registered

Mar 11 04:04:42 overo io scheduler cfq registered (default)

Mar 11 04:04:42 overo OMAP DSS rev 2.0

Mar 11 04:04:42 overo OMAP DISPC rev 3.0

Mar 11 04:04:42 overo OMAP VENC rev 2

Mar 11 04:04:42 overo OMAP DSI rev 1.0

Mar 11 04:04:42 overo Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

Mar 11 04:04:42 overo serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654

Mar 11 04:04:42 overo serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654

Mar 11 04:04:42 overo serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654

Mar 11 04:04:42 overo console [ttyS2] enabled

Mar 11 04:04:42 overo brd: module loaded

Mar 11 04:04:42 overo loop: module loaded

Mar 11 04:04:42 overo omap2-nand driver initializing

Mar 11 04:04:42 overo NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)

Mar 11 04:04:42 overo cmdlinepart partition parsing not available

Mar 11 04:04:42 overo Creating 5 MTD partitions on "omap2-nand.0":

Mar 11 04:04:42 overo 0x000000000000-0x000000080000 : "xloader"

Mar 11 04:04:42 overo 0x000000080000-0x000000240000 : "uboot"

Mar 11 04:04:42 overo 0x000000240000-0x000000280000 : "uboot environment"

Mar 11 04:04:42 overo 0x000000280000-0x000000680000 : "linux"

Mar 11 04:04:42 overo 0x000000680000-0x000010000000 : "rootfs"

Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.

Mar 11 04:04:42 overo smsc911x-mdio: probed

Mar 11 04:04:42 overo eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)

Mar 11 04:04:42 overo net eth0: MAC Address: 00:15:c9:28:d9:c1

Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.

Mar 11 04:04:42 overo usbcore: registered new interface driver asix

Mar 11 04:04:42 overo usbcore: registered new interface driver cdc_ether

Mar 11 04:04:42 overo ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

Mar 11 04:04:42 overo ehci-omap ehci-omap.0: OMAP-EHCI Host Controller

Mar 11 04:04:42 overo ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2

Mar 11 04:04:42 overo ehci-omap ehci-omap.0: irq 77, io mem 0x48064800

Mar 11 04:04:42 overo ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00

Mar 11 04:04:42 overo usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

Mar 11 04:04:42 overo usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Mar 11 04:04:42 overo usb usb2: Product: OMAP-EHCI Host Controller

Mar 11 04:04:42 overo usb usb2: Manufacturer: Linux 2.6.34 ehci_hcd

Mar 11 04:04:42 overo usb usb2: SerialNumber: ehci-omap.0

Mar 11 04:04:42 overo hub 2-0:1.0: USB hub found

Mar 11 04:04:42 overo hub 2-0:1.0: 3 ports detected

Mar 11 04:04:42 overo Initializing USB Mass Storage driver...

Mar 11 04:04:42 overo usbcore: registered new interface driver usb-storage

Mar 11 04:04:42 overo USB Mass Storage support registered.

Mar 11 04:04:42 overo udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)

Mar 11 04:04:42 overo mice: PS/2 mouse device common for all mice

Mar 11 04:04:42 overo twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0

Mar 11 04:04:42 overo i2c /dev entries driver

Mar 11 04:04:42 overo OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec

Mar 11 04:04:42 overo twl4030_wdt: probe of twl4030_wdt failed with error -16

Mar 11 04:04:42 overo Bluetooth: HCI UART driver ver 2.2

Mar 11 04:04:42 overo Bluetooth: HCI H4 protocol initialized

Mar 11 04:04:42 overo Bluetooth: HCI BCSP protocol initialized

Mar 11 04:04:42 overo Bluetooth: HCILL protocol initialized

Mar 11 04:04:42 overo usbcore: registered new interface driver usbhid

Mar 11 04:04:42 overo usbhid: USB HID core driver

Mar 11 04:04:42 overo usbcore: registered new interface driver snd-usb-audio

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-0

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-1

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-2

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-3

Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-4

Mar 11 04:04:42 overo overo SoC init

Mar 11 04:04:42 overo asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok

Mar 11 04:04:42 overo ALSA device list:

Mar 11 04:04:42 overo #0: overo (twl4030)

Mar 11 04:04:42 overo oprofile: using arm/armv7

Mar 11 04:04:42 overo TCP cubic registered

Mar 11 04:04:42 overo NET: Registered protocol family 17

Mar 11 04:04:42 overo NET: Registered protocol family 15

Mar 11 04:04:42 overo Bluetooth: L2CAP ver 2.14

Mar 11 04:04:42 overo Bluetooth: L2CAP socket layer initialized

Mar 11 04:04:42 overo Bluetooth: SCO (Voice Link) ver 0.6

Mar 11 04:04:42 overo Bluetooth: SCO socket layer initialized

Mar 11 04:04:42 overo Bluetooth: RFCOMM TTY layer initialized

Mar 11 04:04:42 overo Bluetooth: RFCOMM socket layer initialized

Mar 11 04:04:42 overo Bluetooth: RFCOMM ver 1.11

Mar 11 04:04:42 overo Bluetooth: BNEP (Ethernet Emulation) ver 1.3

Mar 11 04:04:42 overo Bluetooth: BNEP filters: protocol multicast

Mar 11 04:04:42 overo Bluetooth: HIDP (Human Interface Emulation) ver 1.2

Mar 11 04:04:42 overo ThumbEE CPU extension supported.

Mar 11 04:04:42 overo VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1

Mar 11 04:04:42 overo fbcvt: 1024x768@60: CVT Name - .786M3-R

Mar 11 04:04:42 overo Console: switching to colour frame buffer device 128x48

Mar 11 04:04:42 overo regulator_init_complete: incomplete constraints, leaving VDAC on

Mar 11 04:04:42 overo twl_rtc twl_rtc: setting system clock to 2011-03-11 04:04:25 UTC (1299816265)

Mar 11 04:04:42 overo JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

Mar 11 04:04:42 overo VFS: Mounted root (jffs2 filesystem) on device 31:4.

Mar 11 04:04:42 overo devtmpfs: mounted

Mar 11 04:04:42 overo Freeing init memory: 936K

Mar 11 04:04:42 overo udev: starting version 151

Mar 11 04:04:42 overo udev: renamed network interface eth0 to eth1

Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial

Mar 11 04:04:42 overo USB Serial support registered for generic

Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial_generic

Mar 11 04:04:42 overo usbserial: USB Serial Driver core

Mar 11 04:04:42 overo ads7846 spi1.0: touchscreen, irq 274

Mar 11 04:04:42 overo ads7846 spi1.0: no device detected, test read result was 0x00000000

Mar 11 04:04:42 overo USB Serial support registered for GSM modem (1-port)

Mar 11 04:04:42 overo usbcore: registered new interface driver option

Mar 11 04:04:42 overo option: v0.7.2:USB Driver for GSM modems

Mar 11 04:04:42 overo NET: Registered protocol family 10

Mar 11 04:04:42 overo ntpd[837]: ntpd 4.2.4p7@1.1607 Thu Sep  9 23:45:54 UTC 2010 (1)

Mar 11 04:04:42 overo ntpd[838]: precision = 30.000 usec

Mar 11 04:04:42 overo ntpd[838]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled

Mar 11 04:04:42 overo ntpd[838]: Listening on interface #1 wildcard, ::#123 Disabled

Mar 11 04:04:42 overo ntpd[838]: Listening on interface #2 lo, ::1#123 Enabled

Mar 11 04:04:42 overo ntpd[838]: Listening on interface #3 lo, 127.0.0.1#123 Enabled

Mar 11 04:04:42 overo ntpd[838]: kernel time sync status 0040

Mar 11 04:04:42 overo ntpd[838]: frequency initialized 0.000 PPM from /etc/ntp.drift

Mar 11 04:07:58 overo ntpd[838]: synchronized to LOCAL(0), stratum 14

Mar 11 04:07:58 overo ntpd[838]: kernel time sync status change 0001

Mar 11 04:09:43 overo ntpd[838]: failed to initialize interface for address fe80::215:c9ff:fe28:d9c1

Mar 11 04:09:43 overo ntpd[838]: Listening on interface #5 eth1, 192.168.50.110#123 Enabled

Mar 11 04:14:41 overo syslog-ng[818]: Log statistics; processed='center(queued)=1515', processed='center(received)=326', processed='destination(messages)=214', processed='destination(mailinfo)=0', processed='destination(mailwarn)=0', processed='destination(console)=0', processed='destination(ppp)=0', processed='destination(authlog)=2', processed='destination(user)=0', processed='destination(lpr)=0', processed='destination(daemon)=16', processed='destination(uucp)=0', processed='destination(cron)=0', processed='destination(kern)=307', processed='destination(console_all)=326', processed='destination(mail)=0', processed='destination(xconsole)=0', processed='destination(debug)=324', processed='destination(syslog)=326', processed='destination(newserr)=0', processed='destination(newscrit)=0', processed='destination(newsnotice)=0', processed='destination(mailerr)=0', processed='source(src)=326', processed='source(net)=0'

Mar 11 04:14:43 overo ntpd[838]: failed to initialize interface for address fe80::215:c9ff:fe28:d9c1

 

 

 

 


------------------------------------------------------------------------------
Benefiting from Server Virtualization: Beyond Initial Workload
Consolidation -- Increasing the use of server virtualization is a top
priority.Virtualization can reduce costs, simplify management, and improve
application availability and disaster protection. Learn more about boosting
the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users
Reply | Threaded
Open this post in threaded view
|

Re: Wireless not found on stock image.

David Brandt
I'm seeing similar problems on a Overo Air board at 600MHz.

I tried many different options and many different images both new and older. I suspect broken hardware so I just ordered a new board and will try again.



________________________________________
Fra: Alan Brumley [[hidden email]]
Sendt: 19. april 2011 06:10
Til: 'General mailing list for gumstix users.'
Emne: Re: [Gumstix-users] Wireless not found on stock image.

So I've received my replacement gumstix and it has the same problem.  No wifi on boot.
I know, I know.  I wouldn't believe me either _EXCEPT_ I have another gumstix here I've borrowed and it works fine.
I have my image installed on an SD card and if I take the working setup and swap out my "broken" overo fire into the working setup (same SD image and expander board), I don't have wifi anymore.   However, now I have the luxury of capturing a working boot and a failed boot and diff'ing them.
Two things jump out...
My working setup I believe is an FE version because it's only running at 600Mhz.  My failed version is a Fire at 720MHz
However in the working setup, I see the entry:
mmc1: new SDIO card at address 0001
which isn't there in the failing boot.
Obviously, all the libertas stuff is missing from the failed boot because it's not finding any relevant hardware.

Makes me think of two possabilities...
a timing issue in the kernel when running at 720Mhz, or a GPIO is getting set in uBoot that is holding the wifi in reset.
I'm having a hard time believing the timing issue just based on the number of people who have had success.
I can't find any documentation on how you would go about disabling wifi from within uboot, so I can't check that I am.  I never modified uBoot on either gumstix (the prevous failed, or current failed).
I saw instructions on how to enable/disable wireless in linux (via GPIO16), but nothing there seemed to make a difference.  i.e. kernel never seems to see it get inserted or removed.

Sorry for the book, but does anybody have any suggestions?
I've dropped the logs at http://www.onlinecnc.com/gumstix/ if you want to take a look.

Thanks for any help,
Alan




From: Alan Brumley [mailto:[hidden email]]
Sent: Thursday, March 10, 2011 10:35 PM
To: [hidden email]
Subject: [Gumstix-users] Wireless not found on stock image.


I apologize in advance for regurgitating so much information, I'm just trying to help speed things along.
I've looked for a two nights now and can't find a solution to unstick me on this problem.  Thanks for any help you can give.

I have an overo fire and a tobi board.  It just arrived from gumstix last week and is running the factory firmware that came with it.

I'm trying to use the wired ethernet controller as well as the wifi controller.

Out of the box, the wired connection seems to be happy as eth1
eth1      Link encap:Ethernet  HWaddr 00:15:C9:28:D9:C1
          inet addr:192.168.50.110  Bcast:192.168.50.255  Mask:255.255.255.0

The problem is getting the wifi up.   I've modified my /etc/network/interfaces as shown below but when I try

"ifup wlan0"    I get the following error:
Error for wireless request "Set Mode" (8B06) :
    SET failed on device wlan0 ; No such device.
Error for wireless request "Set ESSID" (8B1A) :
    SET failed on device wlan0 ; No such device.
SIOCSIFADDR: No such device
wlan0: unknown interface: No such device
SIOCSIFNETMASK: No such device
SIOCGIFADDR: No such device
SIOCSIFBROADCAST: No such device
wlan0: unknown interface: No such device
Failed to bring up wlan0.

I am trying to join a simple non-encrypted ad-hoc network w/ static IPs.


I have the following modules loaded on a clean boot:
root@overo:~# lsmod
Module                  Size  Used by
bufferclass_ti          3555  0
omaplfb                 8304  0
pvrsrvkm              126292  2 bufferclass_ti,omaplfb
ipv6                  219860  18
option                 16236  0
ads7846                 8515  0
usbserial              30552  1 option
root@overo:~#

I've also tried modprobing various other apparent wifi modules as I could find, but none seemed to help.
------------------------------------------------------------
here is my interfaces file.

/etc/network/interfaces
root@overo:~# cat /etc/network/interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
#
auto lo
iface lo inet loopback

#
# Wired interfaces
#

#auto eth0
#iface eth0 inet dhcp
#iface eth1 inet dhcp

#
# Wireless interfaces
#

# Example of an unencrypted (no WEP or WPA) wireless connection
# that connects to any available access point:
#

allow-hotplug wlan0
auto wlan0
iface wlan0 inet static
address 192.168.2.2
netmask 255.255.255.0
wireless-mode ad-hoc
wireless-essid gumstix-network

#allow-hotplug wlan0
#iface wlan0 inet static
#       wireless_mode ad-hoc
#       wireless_essid HSMM-MESH
#       address 10.10.11.22
#       netmask 255.0.0.0
#       network 10.0.0.0

# Example of an unencrypted (no WEP or WPA) wireless connection
<SNIP>   I can promise that every line after is a comment line and the stock file.

I thought this device was available over usb, but when I run
root@overo:~# lsusb -t
Bus#  2
`-Dev#   1 Vendor 0x1d6b Product 0x0002
Bus#  1
`-Dev#   1 Vendor 0x1d6b Product 0x0002
root@overo:~#

there's nothing there.
I do have a blue and green LED lit however.

Here are my start up messages.
root@overo:~# cat /var/log/messages
Mar 11 04:04:41 overo Linux version 2.6.34 ([hidden email]) (gcc version 4.3.3 (GCC) ) #1 Wed Oct 20 10:22:48 PDT 2010
Mar 11 04:04:41 overo CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
Mar 11 04:04:41 overo CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Mar 11 04:04:41 overo Machine: Gumstix Overo
Mar 11 04:04:41 overo Memory policy: ECC disabled, Data cache writeback
Mar 11 04:04:41 overo syslog-ng[818]: syslog-ng starting up; version='2.0.5'
Mar 11 04:04:41 overo OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
Mar 11 04:04:41 overo SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
Mar 11 04:04:41 overo Reserving 12582912 bytes SDRAM for VRAM
Mar 11 04:04:41 overo Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Mar 11 04:04:41 overo Kernel command line: console=ttyS2,115200n8 mpurate=500 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi root=/dev/mtdblock4 rw rootfstype=jffs2
Mar 11 04:04:41 overo PID hash table entries: 1024 (order: 0, 4096 bytes)
Mar 11 04:04:41 overo Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 11 04:04:41 overo Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mar 11 04:04:41 overo Memory: 128MB 128MB = 256MB total
Mar 11 04:04:41 overo Memory: 240920k/240920k available, 21224k reserved, 0K highmem
Mar 11 04:04:41 overo Virtual kernel memory layout:
Mar 11 04:04:41 overo vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Mar 11 04:04:41 overo fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
Mar 11 04:04:41 overo DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
Mar 11 04:04:41 overo vmalloc : 0xd0800000 - 0xf8000000   ( 632 MB)
Mar 11 04:04:41 overo lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
Mar 11 04:04:41 overo modules : 0xbf000000 - 0xc0000000   (  16 MB)
Mar 11 04:04:41 overo .init : 0xc0008000 - 0xc00f2000   ( 936 kB)
Mar 11 04:04:41 overo .text : 0xc00f2000 - 0xc05f6000   (5136 kB)
Mar 11 04:04:41 overo .data : 0xc061a000 - 0xc0659400   ( 253 kB)
Mar 11 04:04:41 overo Hierarchical RCU implementation.
Mar 11 04:04:41 overo NR_IRQS:402
Mar 11 04:04:41 overo Clocking rate (Crystal/Core/MPU): 26.0/224/500 MHz
Mar 11 04:04:41 overo Reprogramming SDRC clock to 224791666 Hz
Mar 11 04:04:41 overo GPMC revision 5.0
Mar 11 04:04:41 overo IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
Mar 11 04:04:41 overo Total of 96 interrupts on 1 active controller
Mar 11 04:04:41 overo OMAP GPIO hardware version 2.5
Mar 11 04:04:41 overo OMAP clockevent source: GPTIMER1 at 32768 Hz
Mar 11 04:04:41 overo Console: colour dummy device 80x30
Mar 11 04:04:41 overo Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696)
Mar 11 04:04:41 overo Mount-cache hash table entries: 512
Mar 11 04:04:41 overo CPU: Testing write buffer coherency: ok
Mar 11 04:04:41 overo devtmpfs: initialized
Mar 11 04:04:41 overo regulator: core version 0.5
Mar 11 04:04:41 overo NET: Registered protocol family 16
Mar 11 04:04:41 overo Found NAND on CS0
Mar 11 04:04:41 overo hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
Mar 11 04:04:41 overo Switched to new clocking rate (Crystal/Core/MPU): 26.0/500/224 MHz
Mar 11 04:04:41 overo OMAP DMA hardware revision 4.0
Mar 11 04:04:41 overo bio: create slab <bio-0> at 0
Mar 11 04:04:41 overo SCSI subsystem initialized
Mar 11 04:04:41 overo usbcore: registered new interface driver usbfs
Mar 11 04:04:41 overo usbcore: registered new interface driver hub
Mar 11 04:04:41 overo usbcore: registered new device driver usb
Mar 11 04:04:41 overo i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
Mar 11 04:04:41 overo twl4030: PIH (irq 7) chaining IRQs 368..375
Mar 11 04:04:41 overo twl4030: power (irq 373) chaining IRQs 376..383
Mar 11 04:04:41 overo twl4030: gpio (irq 368) chaining IRQs 384..401
Mar 11 04:04:41 overo regulator: VUSB1V5: 1500 mV normal standby
Mar 11 04:04:41 overo regulator: VUSB1V8: 1800 mV normal standby
Mar 11 04:04:41 overo regulator: VUSB3V1: 3100 mV normal standby
Mar 11 04:04:41 overo twl4030_usb twl4030_usb: Initialized TWL4030 USB module
Mar 11 04:04:41 overo regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
Mar 11 04:04:41 overo regulator: VDAC: 1800 mV normal standby
Mar 11 04:04:41 overo regulator: VDVI: 1800 mV normal standby
Mar 11 04:04:41 overo i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
Mar 11 04:04:41 overo Advanced Linux Sound Architecture Driver Version 1.0.22.1.
Mar 11 04:04:41 overo Bluetooth: Core ver 2.15
Mar 11 04:04:41 overo NET: Registered protocol family 31
Mar 11 04:04:41 overo Bluetooth: HCI device and connection manager initialized
Mar 11 04:04:41 overo Bluetooth: HCI socket layer initialized
Mar 11 04:04:41 overo cfg80211: Calling CRDA to update world regulatory domain
Mar 11 04:04:41 overo Switching to clocksource 32k_counter
Mar 11 04:04:41 overo musb_hdrc: version 6.0, musb-dma, host, debug=0
Mar 11 04:04:41 overo musb_hdrc musb_hdrc: MUSB HDRC host driver
Mar 11 04:04:42 overo musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
Mar 11 04:04:42 overo usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Mar 11 04:04:42 overo usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 11 04:04:42 overo usb usb1: Product: MUSB HDRC host driver
Mar 11 04:04:42 overo usb usb1: Manufacturer: Linux 2.6.34 musb-hcd
Mar 11 04:04:42 overo usb usb1: SerialNumber: musb_hdrc
Mar 11 04:04:42 overo hub 1-0:1.0: USB hub found
Mar 11 04:04:42 overo hub 1-0:1.0: 1 port detected
Mar 11 04:04:42 overo musb_hdrc musb_hdrc: USB Host mode controller at fa0ab000 using DMA, IRQ 92
Mar 11 04:04:42 overo NET: Registered protocol family 2
Mar 11 04:04:42 overo IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Mar 11 04:04:42 overo TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Mar 11 04:04:42 overo TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Mar 11 04:04:42 overo TCP: Hash tables configured (established 8192 bind 8192)
Mar 11 04:04:42 overo TCP reno registered
Mar 11 04:04:42 overo UDP hash table entries: 256 (order: 0, 4096 bytes)
Mar 11 04:04:42 overo UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Mar 11 04:04:42 overo NET: Registered protocol family 1
Mar 11 04:04:42 overo RPC: Registered udp transport module.
Mar 11 04:04:42 overo RPC: Registered tcp transport module.
Mar 11 04:04:42 overo RPC: Registered tcp NFSv4.1 backchannel transport module.
Mar 11 04:04:42 overo VFS: Disk quotas dquot_6.5.2
Mar 11 04:04:42 overo Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 11 04:04:42 overo JFFS2 version 2.2. (NAND) (SUMMARY)  Â© 2001-2006 Red Hat, Inc.
Mar 11 04:04:42 overo msgmni has been set to 470
Mar 11 04:04:42 overo alg: No test for stdrng (krng)
Mar 11 04:04:42 overo Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Mar 11 04:04:42 overo io scheduler noop registered
Mar 11 04:04:42 overo io scheduler deadline registered
Mar 11 04:04:42 overo io scheduler cfq registered (default)
Mar 11 04:04:42 overo OMAP DSS rev 2.0
Mar 11 04:04:42 overo OMAP DISPC rev 3.0
Mar 11 04:04:42 overo OMAP VENC rev 2
Mar 11 04:04:42 overo OMAP DSI rev 1.0
Mar 11 04:04:42 overo Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Mar 11 04:04:42 overo serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
Mar 11 04:04:42 overo serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
Mar 11 04:04:42 overo serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
Mar 11 04:04:42 overo console [ttyS2] enabled
Mar 11 04:04:42 overo brd: module loaded
Mar 11 04:04:42 overo loop: module loaded
Mar 11 04:04:42 overo omap2-nand driver initializing
Mar 11 04:04:42 overo NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)
Mar 11 04:04:42 overo cmdlinepart partition parsing not available
Mar 11 04:04:42 overo Creating 5 MTD partitions on "omap2-nand.0":
Mar 11 04:04:42 overo 0x000000000000-0x000000080000 : "xloader"
Mar 11 04:04:42 overo 0x000000080000-0x000000240000 : "uboot"
Mar 11 04:04:42 overo 0x000000240000-0x000000280000 : "uboot environment"
Mar 11 04:04:42 overo 0x000000280000-0x000000680000 : "linux"
Mar 11 04:04:42 overo 0x000000680000-0x000010000000 : "rootfs"
Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.
Mar 11 04:04:42 overo smsc911x-mdio: probed
Mar 11 04:04:42 overo eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
Mar 11 04:04:42 overo net eth0: MAC Address: 00:15:c9:28:d9:c1
Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.
Mar 11 04:04:42 overo usbcore: registered new interface driver asix
Mar 11 04:04:42 overo usbcore: registered new interface driver cdc_ether
Mar 11 04:04:42 overo ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mar 11 04:04:42 overo ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
Mar 11 04:04:42 overo ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
Mar 11 04:04:42 overo ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
Mar 11 04:04:42 overo ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
Mar 11 04:04:42 overo usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Mar 11 04:04:42 overo usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 11 04:04:42 overo usb usb2: Product: OMAP-EHCI Host Controller
Mar 11 04:04:42 overo usb usb2: Manufacturer: Linux 2.6.34 ehci_hcd
Mar 11 04:04:42 overo usb usb2: SerialNumber: ehci-omap.0
Mar 11 04:04:42 overo hub 2-0:1.0: USB hub found
Mar 11 04:04:42 overo hub 2-0:1.0: 3 ports detected
Mar 11 04:04:42 overo Initializing USB Mass Storage driver...
Mar 11 04:04:42 overo usbcore: registered new interface driver usb-storage
Mar 11 04:04:42 overo USB Mass Storage support registered.
Mar 11 04:04:42 overo udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)
Mar 11 04:04:42 overo mice: PS/2 mouse device common for all mice
Mar 11 04:04:42 overo twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
Mar 11 04:04:42 overo i2c /dev entries driver
Mar 11 04:04:42 overo OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
Mar 11 04:04:42 overo twl4030_wdt: probe of twl4030_wdt failed with error -16
Mar 11 04:04:42 overo Bluetooth: HCI UART driver ver 2.2
Mar 11 04:04:42 overo Bluetooth: HCI H4 protocol initialized
Mar 11 04:04:42 overo Bluetooth: HCI BCSP protocol initialized
Mar 11 04:04:42 overo Bluetooth: HCILL protocol initialized
Mar 11 04:04:42 overo usbcore: registered new interface driver usbhid
Mar 11 04:04:42 overo usbhid: USB HID core driver
Mar 11 04:04:42 overo usbcore: registered new interface driver snd-usb-audio
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-0
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-1
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-2
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-3
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-4
Mar 11 04:04:42 overo overo SoC init
Mar 11 04:04:42 overo asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
Mar 11 04:04:42 overo ALSA device list:
Mar 11 04:04:42 overo #0: overo (twl4030)
Mar 11 04:04:42 overo oprofile: using arm/armv7
Mar 11 04:04:42 overo TCP cubic registered
Mar 11 04:04:42 overo NET: Registered protocol family 17
Mar 11 04:04:42 overo NET: Registered protocol family 15
Mar 11 04:04:42 overo Bluetooth: L2CAP ver 2.14
Mar 11 04:04:42 overo Bluetooth: L2CAP socket layer initialized
Mar 11 04:04:42 overo Bluetooth: SCO (Voice Link) ver 0.6
Mar 11 04:04:42 overo Bluetooth: SCO socket layer initialized
Mar 11 04:04:42 overo Bluetooth: RFCOMM TTY layer initialized
Mar 11 04:04:42 overo Bluetooth: RFCOMM socket layer initialized
Mar 11 04:04:42 overo Bluetooth: RFCOMM ver 1.11
Mar 11 04:04:42 overo Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Mar 11 04:04:42 overo Bluetooth: BNEP filters: protocol multicast
Mar 11 04:04:42 overo Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Mar 11 04:04:42 overo ThumbEE CPU extension supported.
Mar 11 04:04:42 overo VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
Mar 11 04:04:42 overo fbcvt: 1024x768@60: CVT Name - .786M3-R
Mar 11 04:04:42 overo Console: switching to colour frame buffer device 128x48
Mar 11 04:04:42 overo regulator_init_complete: incomplete constraints, leaving VDAC on
Mar 11 04:04:42 overo twl_rtc twl_rtc: setting system clock to 2011-03-11 04:04:25 UTC (1299816265)
Mar 11 04:04:42 overo JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Mar 11 04:04:42 overo VFS: Mounted root (jffs2 filesystem) on device 31:4.
Mar 11 04:04:42 overo devtmpfs: mounted
Mar 11 04:04:42 overo Freeing init memory: 936K
Mar 11 04:04:42 overo udev: starting version 151
Mar 11 04:04:42 overo udev: renamed network interface eth0 to eth1
Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial
Mar 11 04:04:42 overo USB Serial support registered for generic
Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial_generic
Mar 11 04:04:42 overo usbserial: USB Serial Driver core
Mar 11 04:04:42 overo ads7846 spi1.0: touchscreen, irq 274
Mar 11 04:04:42 overo ads7846 spi1.0: no device detected, test read result was 0x00000000
Mar 11 04:04:42 overo USB Serial support registered for GSM modem (1-port)
Mar 11 04:04:42 overo usbcore: registered new interface driver option
Mar 11 04:04:42 overo option: v0.7.2:USB Driver for GSM modems
Mar 11 04:04:42 overo NET: Registered protocol family 10
Mar 11 04:04:42 overo ntpd[837]: ntpd 4.2.4p7@1.1607 Thu Sep  9 23:45:54 UTC 2010 (1)
Mar 11 04:04:42 overo ntpd[838]: precision = 30.000 usec
Mar 11 04:04:42 overo ntpd[838]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Mar 11 04:04:42 overo ntpd[838]: Listening on interface #1 wildcard, ::#123 Disabled
Mar 11 04:04:42 overo ntpd[838]: Listening on interface #2 lo, ::1#123 Enabled
Mar 11 04:04:42 overo ntpd[838]: Listening on interface #3 lo, 127.0.0.1#123 Enabled
Mar 11 04:04:42 overo ntpd[838]: kernel time sync status 0040
Mar 11 04:04:42 overo ntpd[838]: frequency initialized 0.000 PPM from /etc/ntp.drift
Mar 11 04:07:58 overo ntpd[838]: synchronized to LOCAL(0), stratum 14
Mar 11 04:07:58 overo ntpd[838]: kernel time sync status change 0001
Mar 11 04:09:43 overo ntpd[838]: failed to initialize interface for address fe80::215:c9ff:fe28:d9c1
Mar 11 04:09:43 overo ntpd[838]: Listening on interface #5 eth1, 192.168.50.110#123 Enabled
Mar 11 04:14:41 overo syslog-ng[818]: Log statistics; processed='center(queued)=1515', processed='center(received)=326', processed='destination(messages)=214', processed='destination(mailinfo)=0', processed='destination(mailwarn)=0', processed='destination(console)=0', processed='destination(ppp)=0', processed='destination(authlog)=2', processed='destination(user)=0', processed='destination(lpr)=0', processed='destination(daemon)=16', processed='destination(uucp)=0', processed='destination(cron)=0', processed='destination(kern)=307', processed='destination(console_all)=326', processed='destination(mail)=0', processed='destination(xconsole)=0', processed='destination(debug)=324', processed='destination(syslog)=326', processed='destination(newserr)=0', processed='destination(newscrit)=0', processed='destination(newsnotice)=0', processed='destination(mailerr)=0', processed='source(src)=326', processed='source(net)=0'
Mar 11 04:14:43 overo ntpd[838]: failed to initialize interface for address fe80::215:c9ff:fe28:d9c1





------------------------------------------------------------------------------
Benefiting from Server Virtualization: Beyond Initial Workload
Consolidation -- Increasing the use of server virtualization is a top
priority.Virtualization can reduce costs, simplify management, and improve
application availability and disaster protection. Learn more about boosting
the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users
Reply | Threaded
Open this post in threaded view
|

Re: Wireless not found on stock image.

Steven
Hm... I thought the COMs by default boot to 500MHz because 600 and 720 are overclock modes.

Could it be the new Fires have a bug?  I have a Fire FE also and it works fine.

On Tue, Apr 19, 2011 at 3:10 AM, David Brandt <[hidden email]> wrote:
I'm seeing similar problems on a Overo Air board at 600MHz.

I tried many different options and many different images both new and older. I suspect broken hardware so I just ordered a new board and will try again.



________________________________________
Fra: Alan Brumley [[hidden email]]
Sendt: 19. april 2011 06:10
Til: 'General mailing list for gumstix users.'
Emne: Re: [Gumstix-users] Wireless not found on stock image.

So I've received my replacement gumstix and it has the same problem.  No wifi on boot.
I know, I know.  I wouldn't believe me either _EXCEPT_ I have another gumstix here I've borrowed and it works fine.
I have my image installed on an SD card and if I take the working setup and swap out my "broken" overo fire into the working setup (same SD image and expander board), I don't have wifi anymore.   However, now I have the luxury of capturing a working boot and a failed boot and diff'ing them.
Two things jump out...
My working setup I believe is an FE version because it's only running at 600Mhz.  My failed version is a Fire at 720MHz
However in the working setup, I see the entry:
mmc1: new SDIO card at address 0001
which isn't there in the failing boot.
Obviously, all the libertas stuff is missing from the failed boot because it's not finding any relevant hardware.

Makes me think of two possabilities...
a timing issue in the kernel when running at 720Mhz, or a GPIO is getting set in uBoot that is holding the wifi in reset.
I'm having a hard time believing the timing issue just based on the number of people who have had success.
I can't find any documentation on how you would go about disabling wifi from within uboot, so I can't check that I am.  I never modified uBoot on either gumstix (the prevous failed, or current failed).
I saw instructions on how to enable/disable wireless in linux (via GPIO16), but nothing there seemed to make a difference.  i.e. kernel never seems to see it get inserted or removed.

Sorry for the book, but does anybody have any suggestions?
I've dropped the logs at http://www.onlinecnc.com/gumstix/ if you want to take a look.

Thanks for any help,
Alan




From: Alan Brumley [mailto:[hidden email]]
Sent: Thursday, March 10, 2011 10:35 PM
To: [hidden email]
Subject: [Gumstix-users] Wireless not found on stock image.


I apologize in advance for regurgitating so much information, I'm just trying to help speed things along.
I've looked for a two nights now and can't find a solution to unstick me on this problem.  Thanks for any help you can give.

I have an overo fire and a tobi board.  It just arrived from gumstix last week and is running the factory firmware that came with it.

I'm trying to use the wired ethernet controller as well as the wifi controller.

Out of the box, the wired connection seems to be happy as eth1
eth1      Link encap:Ethernet  HWaddr 00:15:C9:28:D9:C1
         inet addr:192.168.50.110  Bcast:192.168.50.255  Mask:255.255.255.0

The problem is getting the wifi up.   I've modified my /etc/network/interfaces as shown below but when I try

"ifup wlan0"    I get the following error:
Error for wireless request "Set Mode" (8B06) :
   SET failed on device wlan0 ; No such device.
Error for wireless request "Set ESSID" (8B1A) :
   SET failed on device wlan0 ; No such device.
SIOCSIFADDR: No such device
wlan0: unknown interface: No such device
SIOCSIFNETMASK: No such device
SIOCGIFADDR: No such device
SIOCSIFBROADCAST: No such device
wlan0: unknown interface: No such device
Failed to bring up wlan0.

I am trying to join a simple non-encrypted ad-hoc network w/ static IPs.


I have the following modules loaded on a clean boot:
root@overo:~# lsmod
Module                  Size  Used by
bufferclass_ti          3555  0
omaplfb                 8304  0
pvrsrvkm              126292  2 bufferclass_ti,omaplfb
ipv6                  219860  18
option                 16236  0
ads7846                 8515  0
usbserial              30552  1 option
root@overo:~#

I've also tried modprobing various other apparent wifi modules as I could find, but none seemed to help.
------------------------------------------------------------
here is my interfaces file.

/etc/network/interfaces
root@overo:~# cat /etc/network/interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
#
auto lo
iface lo inet loopback

#
# Wired interfaces
#

#auto eth0
#iface eth0 inet dhcp
#iface eth1 inet dhcp

#
# Wireless interfaces
#

# Example of an unencrypted (no WEP or WPA) wireless connection
# that connects to any available access point:
#

allow-hotplug wlan0
auto wlan0
iface wlan0 inet static
address 192.168.2.2
netmask 255.255.255.0
wireless-mode ad-hoc
wireless-essid gumstix-network

#allow-hotplug wlan0
#iface wlan0 inet static
#       wireless_mode ad-hoc
#       wireless_essid HSMM-MESH
#       address 10.10.11.22
#       netmask 255.0.0.0
#       network 10.0.0.0

# Example of an unencrypted (no WEP or WPA) wireless connection
<SNIP>   I can promise that every line after is a comment line and the stock file.

I thought this device was available over usb, but when I run
root@overo:~# lsusb -t
Bus#  2
`-Dev#   1 Vendor 0x1d6b Product 0x0002
Bus#  1
`-Dev#   1 Vendor 0x1d6b Product 0x0002
root@overo:~#

there's nothing there.
I do have a blue and green LED lit however.

Here are my start up messages.
root@overo:~# cat /var/log/messages
Mar 11 04:04:41 overo Linux version 2.6.34 ([hidden email]) (gcc version 4.3.3 (GCC) ) #1 Wed Oct 20 10:22:48 PDT 2010
Mar 11 04:04:41 overo CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
Mar 11 04:04:41 overo CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Mar 11 04:04:41 overo Machine: Gumstix Overo
Mar 11 04:04:41 overo Memory policy: ECC disabled, Data cache writeback
Mar 11 04:04:41 overo syslog-ng[818]: syslog-ng starting up; version='2.0.5'
Mar 11 04:04:41 overo OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
Mar 11 04:04:41 overo SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
Mar 11 04:04:41 overo Reserving 12582912 bytes SDRAM for VRAM
Mar 11 04:04:41 overo Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Mar 11 04:04:41 overo Kernel command line: console=ttyS2,115200n8 mpurate=500 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi root=/dev/mtdblock4 rw rootfstype=jffs2
Mar 11 04:04:41 overo PID hash table entries: 1024 (order: 0, 4096 bytes)
Mar 11 04:04:41 overo Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 11 04:04:41 overo Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mar 11 04:04:41 overo Memory: 128MB 128MB = 256MB total
Mar 11 04:04:41 overo Memory: 240920k/240920k available, 21224k reserved, 0K highmem
Mar 11 04:04:41 overo Virtual kernel memory layout:
Mar 11 04:04:41 overo vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Mar 11 04:04:41 overo fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
Mar 11 04:04:41 overo DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
Mar 11 04:04:41 overo vmalloc : 0xd0800000 - 0xf8000000   ( 632 MB)
Mar 11 04:04:41 overo lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
Mar 11 04:04:41 overo modules : 0xbf000000 - 0xc0000000   (  16 MB)
Mar 11 04:04:41 overo .init : 0xc0008000 - 0xc00f2000   ( 936 kB)
Mar 11 04:04:41 overo .text : 0xc00f2000 - 0xc05f6000   (5136 kB)
Mar 11 04:04:41 overo .data : 0xc061a000 - 0xc0659400   ( 253 kB)
Mar 11 04:04:41 overo Hierarchical RCU implementation.
Mar 11 04:04:41 overo NR_IRQS:402
Mar 11 04:04:41 overo Clocking rate (Crystal/Core/MPU): 26.0/224/500 MHz
Mar 11 04:04:41 overo Reprogramming SDRC clock to 224791666 Hz
Mar 11 04:04:41 overo GPMC revision 5.0
Mar 11 04:04:41 overo IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
Mar 11 04:04:41 overo Total of 96 interrupts on 1 active controller
Mar 11 04:04:41 overo OMAP GPIO hardware version 2.5
Mar 11 04:04:41 overo OMAP clockevent source: GPTIMER1 at 32768 Hz
Mar 11 04:04:41 overo Console: colour dummy device 80x30
Mar 11 04:04:41 overo Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696)
Mar 11 04:04:41 overo Mount-cache hash table entries: 512
Mar 11 04:04:41 overo CPU: Testing write buffer coherency: ok
Mar 11 04:04:41 overo devtmpfs: initialized
Mar 11 04:04:41 overo regulator: core version 0.5
Mar 11 04:04:41 overo NET: Registered protocol family 16
Mar 11 04:04:41 overo Found NAND on CS0
Mar 11 04:04:41 overo hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
Mar 11 04:04:41 overo Switched to new clocking rate (Crystal/Core/MPU): 26.0/500/224 MHz
Mar 11 04:04:41 overo OMAP DMA hardware revision 4.0
Mar 11 04:04:41 overo bio: create slab <bio-0> at 0
Mar 11 04:04:41 overo SCSI subsystem initialized
Mar 11 04:04:41 overo usbcore: registered new interface driver usbfs
Mar 11 04:04:41 overo usbcore: registered new interface driver hub
Mar 11 04:04:41 overo usbcore: registered new device driver usb
Mar 11 04:04:41 overo i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
Mar 11 04:04:41 overo twl4030: PIH (irq 7) chaining IRQs 368..375
Mar 11 04:04:41 overo twl4030: power (irq 373) chaining IRQs 376..383
Mar 11 04:04:41 overo twl4030: gpio (irq 368) chaining IRQs 384..401
Mar 11 04:04:41 overo regulator: VUSB1V5: 1500 mV normal standby
Mar 11 04:04:41 overo regulator: VUSB1V8: 1800 mV normal standby
Mar 11 04:04:41 overo regulator: VUSB3V1: 3100 mV normal standby
Mar 11 04:04:41 overo twl4030_usb twl4030_usb: Initialized TWL4030 USB module
Mar 11 04:04:41 overo regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
Mar 11 04:04:41 overo regulator: VDAC: 1800 mV normal standby
Mar 11 04:04:41 overo regulator: VDVI: 1800 mV normal standby
Mar 11 04:04:41 overo i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
Mar 11 04:04:41 overo Advanced Linux Sound Architecture Driver Version 1.0.22.1.
Mar 11 04:04:41 overo Bluetooth: Core ver 2.15
Mar 11 04:04:41 overo NET: Registered protocol family 31
Mar 11 04:04:41 overo Bluetooth: HCI device and connection manager initialized
Mar 11 04:04:41 overo Bluetooth: HCI socket layer initialized
Mar 11 04:04:41 overo cfg80211: Calling CRDA to update world regulatory domain
Mar 11 04:04:41 overo Switching to clocksource 32k_counter
Mar 11 04:04:41 overo musb_hdrc: version 6.0, musb-dma, host, debug=0
Mar 11 04:04:41 overo musb_hdrc musb_hdrc: MUSB HDRC host driver
Mar 11 04:04:42 overo musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
Mar 11 04:04:42 overo usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Mar 11 04:04:42 overo usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 11 04:04:42 overo usb usb1: Product: MUSB HDRC host driver
Mar 11 04:04:42 overo usb usb1: Manufacturer: Linux 2.6.34 musb-hcd
Mar 11 04:04:42 overo usb usb1: SerialNumber: musb_hdrc
Mar 11 04:04:42 overo hub 1-0:1.0: USB hub found
Mar 11 04:04:42 overo hub 1-0:1.0: 1 port detected
Mar 11 04:04:42 overo musb_hdrc musb_hdrc: USB Host mode controller at fa0ab000 using DMA, IRQ 92
Mar 11 04:04:42 overo NET: Registered protocol family 2
Mar 11 04:04:42 overo IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Mar 11 04:04:42 overo TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Mar 11 04:04:42 overo TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Mar 11 04:04:42 overo TCP: Hash tables configured (established 8192 bind 8192)
Mar 11 04:04:42 overo TCP reno registered
Mar 11 04:04:42 overo UDP hash table entries: 256 (order: 0, 4096 bytes)
Mar 11 04:04:42 overo UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Mar 11 04:04:42 overo NET: Registered protocol family 1
Mar 11 04:04:42 overo RPC: Registered udp transport module.
Mar 11 04:04:42 overo RPC: Registered tcp transport module.
Mar 11 04:04:42 overo RPC: Registered tcp NFSv4.1 backchannel transport module.
Mar 11 04:04:42 overo VFS: Disk quotas dquot_6.5.2
Mar 11 04:04:42 overo Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 11 04:04:42 overo JFFS2 version 2.2. (NAND) (SUMMARY)  Â© 2001-2006 Red Hat, Inc.
Mar 11 04:04:42 overo msgmni has been set to 470
Mar 11 04:04:42 overo alg: No test for stdrng (krng)
Mar 11 04:04:42 overo Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Mar 11 04:04:42 overo io scheduler noop registered
Mar 11 04:04:42 overo io scheduler deadline registered
Mar 11 04:04:42 overo io scheduler cfq registered (default)
Mar 11 04:04:42 overo OMAP DSS rev 2.0
Mar 11 04:04:42 overo OMAP DISPC rev 3.0
Mar 11 04:04:42 overo OMAP VENC rev 2
Mar 11 04:04:42 overo OMAP DSI rev 1.0
Mar 11 04:04:42 overo Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Mar 11 04:04:42 overo serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
Mar 11 04:04:42 overo serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
Mar 11 04:04:42 overo serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
Mar 11 04:04:42 overo console [ttyS2] enabled
Mar 11 04:04:42 overo brd: module loaded
Mar 11 04:04:42 overo loop: module loaded
Mar 11 04:04:42 overo omap2-nand driver initializing
Mar 11 04:04:42 overo NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)
Mar 11 04:04:42 overo cmdlinepart partition parsing not available
Mar 11 04:04:42 overo Creating 5 MTD partitions on "omap2-nand.0":
Mar 11 04:04:42 overo 0x000000000000-0x000000080000 : "xloader"
Mar 11 04:04:42 overo 0x000000080000-0x000000240000 : "uboot"
Mar 11 04:04:42 overo 0x000000240000-0x000000280000 : "uboot environment"
Mar 11 04:04:42 overo 0x000000280000-0x000000680000 : "linux"
Mar 11 04:04:42 overo 0x000000680000-0x000010000000 : "rootfs"
Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.
Mar 11 04:04:42 overo smsc911x-mdio: probed
Mar 11 04:04:42 overo eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
Mar 11 04:04:42 overo net eth0: MAC Address: 00:15:c9:28:d9:c1
Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.
Mar 11 04:04:42 overo usbcore: registered new interface driver asix
Mar 11 04:04:42 overo usbcore: registered new interface driver cdc_ether
Mar 11 04:04:42 overo ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mar 11 04:04:42 overo ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
Mar 11 04:04:42 overo ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
Mar 11 04:04:42 overo ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
Mar 11 04:04:42 overo ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
Mar 11 04:04:42 overo usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Mar 11 04:04:42 overo usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 11 04:04:42 overo usb usb2: Product: OMAP-EHCI Host Controller
Mar 11 04:04:42 overo usb usb2: Manufacturer: Linux 2.6.34 ehci_hcd
Mar 11 04:04:42 overo usb usb2: SerialNumber: ehci-omap.0
Mar 11 04:04:42 overo hub 2-0:1.0: USB hub found
Mar 11 04:04:42 overo hub 2-0:1.0: 3 ports detected
Mar 11 04:04:42 overo Initializing USB Mass Storage driver...
Mar 11 04:04:42 overo usbcore: registered new interface driver usb-storage
Mar 11 04:04:42 overo USB Mass Storage support registered.
Mar 11 04:04:42 overo udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)
Mar 11 04:04:42 overo mice: PS/2 mouse device common for all mice
Mar 11 04:04:42 overo twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
Mar 11 04:04:42 overo i2c /dev entries driver
Mar 11 04:04:42 overo OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
Mar 11 04:04:42 overo twl4030_wdt: probe of twl4030_wdt failed with error -16
Mar 11 04:04:42 overo Bluetooth: HCI UART driver ver 2.2
Mar 11 04:04:42 overo Bluetooth: HCI H4 protocol initialized
Mar 11 04:04:42 overo Bluetooth: HCI BCSP protocol initialized
Mar 11 04:04:42 overo Bluetooth: HCILL protocol initialized
Mar 11 04:04:42 overo usbcore: registered new interface driver usbhid
Mar 11 04:04:42 overo usbhid: USB HID core driver
Mar 11 04:04:42 overo usbcore: registered new interface driver snd-usb-audio
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-0
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-1
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-2
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-3
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-4
Mar 11 04:04:42 overo overo SoC init
Mar 11 04:04:42 overo asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
Mar 11 04:04:42 overo ALSA device list:
Mar 11 04:04:42 overo #0: overo (twl4030)
Mar 11 04:04:42 overo oprofile: using arm/armv7
Mar 11 04:04:42 overo TCP cubic registered
Mar 11 04:04:42 overo NET: Registered protocol family 17
Mar 11 04:04:42 overo NET: Registered protocol family 15
Mar 11 04:04:42 overo Bluetooth: L2CAP ver 2.14
Mar 11 04:04:42 overo Bluetooth: L2CAP socket layer initialized
Mar 11 04:04:42 overo Bluetooth: SCO (Voice Link) ver 0.6
Mar 11 04:04:42 overo Bluetooth: SCO socket layer initialized
Mar 11 04:04:42 overo Bluetooth: RFCOMM TTY layer initialized
Mar 11 04:04:42 overo Bluetooth: RFCOMM socket layer initialized
Mar 11 04:04:42 overo Bluetooth: RFCOMM ver 1.11
Mar 11 04:04:42 overo Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Mar 11 04:04:42 overo Bluetooth: BNEP filters: protocol multicast
Mar 11 04:04:42 overo Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Mar 11 04:04:42 overo ThumbEE CPU extension supported.
Mar 11 04:04:42 overo VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
Mar 11 04:04:42 overo fbcvt: 1024x768@60: CVT Name - .786M3-R
Mar 11 04:04:42 overo Console: switching to colour frame buffer device 128x48
Mar 11 04:04:42 overo regulator_init_complete: incomplete constraints, leaving VDAC on
Mar 11 04:04:42 overo twl_rtc twl_rtc: setting system clock to 2011-03-11 04:04:25 UTC (1299816265)
Mar 11 04:04:42 overo JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Mar 11 04:04:42 overo VFS: Mounted root (jffs2 filesystem) on device 31:4.
Mar 11 04:04:42 overo devtmpfs: mounted
Mar 11 04:04:42 overo Freeing init memory: 936K
Mar 11 04:04:42 overo udev: starting version 151
Mar 11 04:04:42 overo udev: renamed network interface eth0 to eth1
Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial
Mar 11 04:04:42 overo USB Serial support registered for generic
Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial_generic
Mar 11 04:04:42 overo usbserial: USB Serial Driver core
Mar 11 04:04:42 overo ads7846 spi1.0: touchscreen, irq 274
Mar 11 04:04:42 overo ads7846 spi1.0: no device detected, test read result was 0x00000000
Mar 11 04:04:42 overo USB Serial support registered for GSM modem (1-port)
Mar 11 04:04:42 overo usbcore: registered new interface driver option
Mar 11 04:04:42 overo option: v0.7.2:USB Driver for GSM modems
Mar 11 04:04:42 overo NET: Registered protocol family 10
Mar 11 04:04:42 overo ntpd[837]: ntpd 4.2.4p7@1.1607 Thu Sep  9 23:45:54 UTC 2010 (1)
Mar 11 04:04:42 overo ntpd[838]: precision = 30.000 usec
Mar 11 04:04:42 overo ntpd[838]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Mar 11 04:04:42 overo ntpd[838]: Listening on interface #1 wildcard, ::#123 Disabled
Mar 11 04:04:42 overo ntpd[838]: Listening on interface #2 lo, ::1#123 Enabled
Mar 11 04:04:42 overo ntpd[838]: Listening on interface #3 lo, 127.0.0.1#123 Enabled
Mar 11 04:04:42 overo ntpd[838]: kernel time sync status 0040
Mar 11 04:04:42 overo ntpd[838]: frequency initialized 0.000 PPM from /etc/ntp.drift
Mar 11 04:07:58 overo ntpd[838]: synchronized to LOCAL(0), stratum 14
Mar 11 04:07:58 overo ntpd[838]: kernel time sync status change 0001
Mar 11 04:09:43 overo ntpd[838]: failed to initialize interface for address fe80::215:c9ff:fe28:d9c1
Mar 11 04:09:43 overo ntpd[838]: Listening on interface #5 eth1, 192.168.50.110#123 Enabled
Mar 11 04:14:41 overo syslog-ng[818]: Log statistics; processed='center(queued)=1515', processed='center(received)=326', processed='destination(messages)=214', processed='destination(mailinfo)=0', processed='destination(mailwarn)=0', processed='destination(console)=0', processed='destination(ppp)=0', processed='destination(authlog)=2', processed='destination(user)=0', processed='destination(lpr)=0', processed='destination(daemon)=16', processed='destination(uucp)=0', processed='destination(cron)=0', processed='destination(kern)=307', processed='destination(console_all)=326', processed='destination(mail)=0', processed='destination(xconsole)=0', processed='destination(debug)=324', processed='destination(syslog)=326', processed='destination(newserr)=0', processed='destination(newscrit)=0', processed='destination(newsnotice)=0', processed='destination(mailerr)=0', processed='source(src)=326', processed='source(net)=0'
Mar 11 04:14:43 overo ntpd[838]: failed to initialize interface for address fe80::215:c9ff:fe28:d9c1





------------------------------------------------------------------------------
Benefiting from Server Virtualization: Beyond Initial Workload
Consolidation -- Increasing the use of server virtualization is a top
priority.Virtualization can reduce costs, simplify management, and improve
application availability and disaster protection. Learn more about boosting
the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
_______________________________________________
gumstix-users mailing list


------------------------------------------------------------------------------
Benefiting from Server Virtualization: Beyond Initial Workload
Consolidation -- Increasing the use of server virtualization is a top
priority.Virtualization can reduce costs, simplify management, and improve
application availability and disaster protection. Learn more about boosting
the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users
j
Reply | Threaded
Open this post in threaded view
|

Re: Wireless not found on stock image.

j
I have been told overo com's default to 600, I run my fire at 720 with no major issues.



On Tue, Apr 19, 2011 at 12:17 PM, Steven <[hidden email]> wrote:
Hm... I thought the COMs by default boot to 500MHz because 600 and 720 are overclock modes.

Could it be the new Fires have a bug?  I have a Fire FE also and it works fine.

On Tue, Apr 19, 2011 at 3:10 AM, David Brandt <[hidden email]> wrote:
I'm seeing similar problems on a Overo Air board at 600MHz.

I tried many different options and many different images both new and older. I suspect broken hardware so I just ordered a new board and will try again.



________________________________________
Fra: Alan Brumley [[hidden email]]
Sendt: 19. april 2011 06:10
Til: 'General mailing list for gumstix users.'
Emne: Re: [Gumstix-users] Wireless not found on stock image.

So I've received my replacement gumstix and it has the same problem.  No wifi on boot.
I know, I know.  I wouldn't believe me either _EXCEPT_ I have another gumstix here I've borrowed and it works fine.
I have my image installed on an SD card and if I take the working setup and swap out my "broken" overo fire into the working setup (same SD image and expander board), I don't have wifi anymore.   However, now I have the luxury of capturing a working boot and a failed boot and diff'ing them.
Two things jump out...
My working setup I believe is an FE version because it's only running at 600Mhz.  My failed version is a Fire at 720MHz
However in the working setup, I see the entry:
mmc1: new SDIO card at address 0001
which isn't there in the failing boot.
Obviously, all the libertas stuff is missing from the failed boot because it's not finding any relevant hardware.

Makes me think of two possabilities...
a timing issue in the kernel when running at 720Mhz, or a GPIO is getting set in uBoot that is holding the wifi in reset.
I'm having a hard time believing the timing issue just based on the number of people who have had success.
I can't find any documentation on how you would go about disabling wifi from within uboot, so I can't check that I am.  I never modified uBoot on either gumstix (the prevous failed, or current failed).
I saw instructions on how to enable/disable wireless in linux (via GPIO16), but nothing there seemed to make a difference.  i.e. kernel never seems to see it get inserted or removed.

Sorry for the book, but does anybody have any suggestions?
I've dropped the logs at http://www.onlinecnc.com/gumstix/ if you want to take a look.

Thanks for any help,
Alan




From: Alan Brumley [mailto:[hidden email]]
Sent: Thursday, March 10, 2011 10:35 PM
To: [hidden email]
Subject: [Gumstix-users] Wireless not found on stock image.


I apologize in advance for regurgitating so much information, I'm just trying to help speed things along.
I've looked for a two nights now and can't find a solution to unstick me on this problem.  Thanks for any help you can give.

I have an overo fire and a tobi board.  It just arrived from gumstix last week and is running the factory firmware that came with it.

I'm trying to use the wired ethernet controller as well as the wifi controller.

Out of the box, the wired connection seems to be happy as eth1
eth1      Link encap:Ethernet  HWaddr 00:15:C9:28:D9:C1
         inet addr:192.168.50.110  Bcast:192.168.50.255  Mask:255.255.255.0

The problem is getting the wifi up.   I've modified my /etc/network/interfaces as shown below but when I try

"ifup wlan0"    I get the following error:
Error for wireless request "Set Mode" (8B06) :
   SET failed on device wlan0 ; No such device.
Error for wireless request "Set ESSID" (8B1A) :
   SET failed on device wlan0 ; No such device.
SIOCSIFADDR: No such device
wlan0: unknown interface: No such device
SIOCSIFNETMASK: No such device
SIOCGIFADDR: No such device
SIOCSIFBROADCAST: No such device
wlan0: unknown interface: No such device
Failed to bring up wlan0.

I am trying to join a simple non-encrypted ad-hoc network w/ static IPs.


I have the following modules loaded on a clean boot:
root@overo:~# lsmod
Module                  Size  Used by
bufferclass_ti          3555  0
omaplfb                 8304  0
pvrsrvkm              126292  2 bufferclass_ti,omaplfb
ipv6                  219860  18
option                 16236  0
ads7846                 8515  0
usbserial              30552  1 option
root@overo:~#

I've also tried modprobing various other apparent wifi modules as I could find, but none seemed to help.
------------------------------------------------------------
here is my interfaces file.

/etc/network/interfaces
root@overo:~# cat /etc/network/interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
#
auto lo
iface lo inet loopback

#
# Wired interfaces
#

#auto eth0
#iface eth0 inet dhcp
#iface eth1 inet dhcp

#
# Wireless interfaces
#

# Example of an unencrypted (no WEP or WPA) wireless connection
# that connects to any available access point:
#

allow-hotplug wlan0
auto wlan0
iface wlan0 inet static
address 192.168.2.2
netmask 255.255.255.0
wireless-mode ad-hoc
wireless-essid gumstix-network

#allow-hotplug wlan0
#iface wlan0 inet static
#       wireless_mode ad-hoc
#       wireless_essid HSMM-MESH
#       address 10.10.11.22
#       netmask 255.0.0.0
#       network 10.0.0.0

# Example of an unencrypted (no WEP or WPA) wireless connection
<SNIP>   I can promise that every line after is a comment line and the stock file.

I thought this device was available over usb, but when I run
root@overo:~# lsusb -t
Bus#  2
`-Dev#   1 Vendor 0x1d6b Product 0x0002
Bus#  1
`-Dev#   1 Vendor 0x1d6b Product 0x0002
root@overo:~#

there's nothing there.
I do have a blue and green LED lit however.

Here are my start up messages.
root@overo:~# cat /var/log/messages
Mar 11 04:04:41 overo Linux version 2.6.34 ([hidden email]) (gcc version 4.3.3 (GCC) ) #1 Wed Oct 20 10:22:48 PDT 2010
Mar 11 04:04:41 overo CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
Mar 11 04:04:41 overo CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Mar 11 04:04:41 overo Machine: Gumstix Overo
Mar 11 04:04:41 overo Memory policy: ECC disabled, Data cache writeback
Mar 11 04:04:41 overo syslog-ng[818]: syslog-ng starting up; version='2.0.5'
Mar 11 04:04:41 overo OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
Mar 11 04:04:41 overo SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
Mar 11 04:04:41 overo Reserving 12582912 bytes SDRAM for VRAM
Mar 11 04:04:41 overo Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Mar 11 04:04:41 overo Kernel command line: console=ttyS2,115200n8 mpurate=500 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi root=/dev/mtdblock4 rw rootfstype=jffs2
Mar 11 04:04:41 overo PID hash table entries: 1024 (order: 0, 4096 bytes)
Mar 11 04:04:41 overo Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 11 04:04:41 overo Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mar 11 04:04:41 overo Memory: 128MB 128MB = 256MB total
Mar 11 04:04:41 overo Memory: 240920k/240920k available, 21224k reserved, 0K highmem
Mar 11 04:04:41 overo Virtual kernel memory layout:
Mar 11 04:04:41 overo vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Mar 11 04:04:41 overo fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
Mar 11 04:04:41 overo DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
Mar 11 04:04:41 overo vmalloc : 0xd0800000 - 0xf8000000   ( 632 MB)
Mar 11 04:04:41 overo lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
Mar 11 04:04:41 overo modules : 0xbf000000 - 0xc0000000   (  16 MB)
Mar 11 04:04:41 overo .init : 0xc0008000 - 0xc00f2000   ( 936 kB)
Mar 11 04:04:41 overo .text : 0xc00f2000 - 0xc05f6000   (5136 kB)
Mar 11 04:04:41 overo .data : 0xc061a000 - 0xc0659400   ( 253 kB)
Mar 11 04:04:41 overo Hierarchical RCU implementation.
Mar 11 04:04:41 overo NR_IRQS:402
Mar 11 04:04:41 overo Clocking rate (Crystal/Core/MPU): 26.0/224/500 MHz
Mar 11 04:04:41 overo Reprogramming SDRC clock to 224791666 Hz
Mar 11 04:04:41 overo GPMC revision 5.0
Mar 11 04:04:41 overo IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
Mar 11 04:04:41 overo Total of 96 interrupts on 1 active controller
Mar 11 04:04:41 overo OMAP GPIO hardware version 2.5
Mar 11 04:04:41 overo OMAP clockevent source: GPTIMER1 at 32768 Hz
Mar 11 04:04:41 overo Console: colour dummy device 80x30
Mar 11 04:04:41 overo Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696)
Mar 11 04:04:41 overo Mount-cache hash table entries: 512
Mar 11 04:04:41 overo CPU: Testing write buffer coherency: ok
Mar 11 04:04:41 overo devtmpfs: initialized
Mar 11 04:04:41 overo regulator: core version 0.5
Mar 11 04:04:41 overo NET: Registered protocol family 16
Mar 11 04:04:41 overo Found NAND on CS0
Mar 11 04:04:41 overo hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
Mar 11 04:04:41 overo Switched to new clocking rate (Crystal/Core/MPU): 26.0/500/224 MHz
Mar 11 04:04:41 overo OMAP DMA hardware revision 4.0
Mar 11 04:04:41 overo bio: create slab <bio-0> at 0
Mar 11 04:04:41 overo SCSI subsystem initialized
Mar 11 04:04:41 overo usbcore: registered new interface driver usbfs
Mar 11 04:04:41 overo usbcore: registered new interface driver hub
Mar 11 04:04:41 overo usbcore: registered new device driver usb
Mar 11 04:04:41 overo i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
Mar 11 04:04:41 overo twl4030: PIH (irq 7) chaining IRQs 368..375
Mar 11 04:04:41 overo twl4030: power (irq 373) chaining IRQs 376..383
Mar 11 04:04:41 overo twl4030: gpio (irq 368) chaining IRQs 384..401
Mar 11 04:04:41 overo regulator: VUSB1V5: 1500 mV normal standby
Mar 11 04:04:41 overo regulator: VUSB1V8: 1800 mV normal standby
Mar 11 04:04:41 overo regulator: VUSB3V1: 3100 mV normal standby
Mar 11 04:04:41 overo twl4030_usb twl4030_usb: Initialized TWL4030 USB module
Mar 11 04:04:41 overo regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
Mar 11 04:04:41 overo regulator: VDAC: 1800 mV normal standby
Mar 11 04:04:41 overo regulator: VDVI: 1800 mV normal standby
Mar 11 04:04:41 overo i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
Mar 11 04:04:41 overo Advanced Linux Sound Architecture Driver Version 1.0.22.1.
Mar 11 04:04:41 overo Bluetooth: Core ver 2.15
Mar 11 04:04:41 overo NET: Registered protocol family 31
Mar 11 04:04:41 overo Bluetooth: HCI device and connection manager initialized
Mar 11 04:04:41 overo Bluetooth: HCI socket layer initialized
Mar 11 04:04:41 overo cfg80211: Calling CRDA to update world regulatory domain
Mar 11 04:04:41 overo Switching to clocksource 32k_counter
Mar 11 04:04:41 overo musb_hdrc: version 6.0, musb-dma, host, debug=0
Mar 11 04:04:41 overo musb_hdrc musb_hdrc: MUSB HDRC host driver
Mar 11 04:04:42 overo musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
Mar 11 04:04:42 overo usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Mar 11 04:04:42 overo usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 11 04:04:42 overo usb usb1: Product: MUSB HDRC host driver
Mar 11 04:04:42 overo usb usb1: Manufacturer: Linux 2.6.34 musb-hcd
Mar 11 04:04:42 overo usb usb1: SerialNumber: musb_hdrc
Mar 11 04:04:42 overo hub 1-0:1.0: USB hub found
Mar 11 04:04:42 overo hub 1-0:1.0: 1 port detected
Mar 11 04:04:42 overo musb_hdrc musb_hdrc: USB Host mode controller at fa0ab000 using DMA, IRQ 92
Mar 11 04:04:42 overo NET: Registered protocol family 2
Mar 11 04:04:42 overo IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Mar 11 04:04:42 overo TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Mar 11 04:04:42 overo TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Mar 11 04:04:42 overo TCP: Hash tables configured (established 8192 bind 8192)
Mar 11 04:04:42 overo TCP reno registered
Mar 11 04:04:42 overo UDP hash table entries: 256 (order: 0, 4096 bytes)
Mar 11 04:04:42 overo UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Mar 11 04:04:42 overo NET: Registered protocol family 1
Mar 11 04:04:42 overo RPC: Registered udp transport module.
Mar 11 04:04:42 overo RPC: Registered tcp transport module.
Mar 11 04:04:42 overo RPC: Registered tcp NFSv4.1 backchannel transport module.
Mar 11 04:04:42 overo VFS: Disk quotas dquot_6.5.2
Mar 11 04:04:42 overo Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 11 04:04:42 overo JFFS2 version 2.2. (NAND) (SUMMARY)  Â© 2001-2006 Red Hat, Inc.
Mar 11 04:04:42 overo msgmni has been set to 470
Mar 11 04:04:42 overo alg: No test for stdrng (krng)
Mar 11 04:04:42 overo Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Mar 11 04:04:42 overo io scheduler noop registered
Mar 11 04:04:42 overo io scheduler deadline registered
Mar 11 04:04:42 overo io scheduler cfq registered (default)
Mar 11 04:04:42 overo OMAP DSS rev 2.0
Mar 11 04:04:42 overo OMAP DISPC rev 3.0
Mar 11 04:04:42 overo OMAP VENC rev 2
Mar 11 04:04:42 overo OMAP DSI rev 1.0
Mar 11 04:04:42 overo Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Mar 11 04:04:42 overo serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
Mar 11 04:04:42 overo serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
Mar 11 04:04:42 overo serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
Mar 11 04:04:42 overo console [ttyS2] enabled
Mar 11 04:04:42 overo brd: module loaded
Mar 11 04:04:42 overo loop: module loaded
Mar 11 04:04:42 overo omap2-nand driver initializing
Mar 11 04:04:42 overo NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)
Mar 11 04:04:42 overo cmdlinepart partition parsing not available
Mar 11 04:04:42 overo Creating 5 MTD partitions on "omap2-nand.0":
Mar 11 04:04:42 overo 0x000000000000-0x000000080000 : "xloader"
Mar 11 04:04:42 overo 0x000000080000-0x000000240000 : "uboot"
Mar 11 04:04:42 overo 0x000000240000-0x000000280000 : "uboot environment"
Mar 11 04:04:42 overo 0x000000280000-0x000000680000 : "linux"
Mar 11 04:04:42 overo 0x000000680000-0x000010000000 : "rootfs"
Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.
Mar 11 04:04:42 overo smsc911x-mdio: probed
Mar 11 04:04:42 overo eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
Mar 11 04:04:42 overo net eth0: MAC Address: 00:15:c9:28:d9:c1
Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.
Mar 11 04:04:42 overo usbcore: registered new interface driver asix
Mar 11 04:04:42 overo usbcore: registered new interface driver cdc_ether
Mar 11 04:04:42 overo ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mar 11 04:04:42 overo ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
Mar 11 04:04:42 overo ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
Mar 11 04:04:42 overo ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
Mar 11 04:04:42 overo ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
Mar 11 04:04:42 overo usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Mar 11 04:04:42 overo usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 11 04:04:42 overo usb usb2: Product: OMAP-EHCI Host Controller
Mar 11 04:04:42 overo usb usb2: Manufacturer: Linux 2.6.34 ehci_hcd
Mar 11 04:04:42 overo usb usb2: SerialNumber: ehci-omap.0
Mar 11 04:04:42 overo hub 2-0:1.0: USB hub found
Mar 11 04:04:42 overo hub 2-0:1.0: 3 ports detected
Mar 11 04:04:42 overo Initializing USB Mass Storage driver...
Mar 11 04:04:42 overo usbcore: registered new interface driver usb-storage
Mar 11 04:04:42 overo USB Mass Storage support registered.
Mar 11 04:04:42 overo udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)
Mar 11 04:04:42 overo mice: PS/2 mouse device common for all mice
Mar 11 04:04:42 overo twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
Mar 11 04:04:42 overo i2c /dev entries driver
Mar 11 04:04:42 overo OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
Mar 11 04:04:42 overo twl4030_wdt: probe of twl4030_wdt failed with error -16
Mar 11 04:04:42 overo Bluetooth: HCI UART driver ver 2.2
Mar 11 04:04:42 overo Bluetooth: HCI H4 protocol initialized
Mar 11 04:04:42 overo Bluetooth: HCI BCSP protocol initialized
Mar 11 04:04:42 overo Bluetooth: HCILL protocol initialized
Mar 11 04:04:42 overo usbcore: registered new interface driver usbhid
Mar 11 04:04:42 overo usbhid: USB HID core driver
Mar 11 04:04:42 overo usbcore: registered new interface driver snd-usb-audio
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-0
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-1
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-2
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-3
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-4
Mar 11 04:04:42 overo overo SoC init
Mar 11 04:04:42 overo asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
Mar 11 04:04:42 overo ALSA device list:
Mar 11 04:04:42 overo #0: overo (twl4030)
Mar 11 04:04:42 overo oprofile: using arm/armv7
Mar 11 04:04:42 overo TCP cubic registered
Mar 11 04:04:42 overo NET: Registered protocol family 17
Mar 11 04:04:42 overo NET: Registered protocol family 15
Mar 11 04:04:42 overo Bluetooth: L2CAP ver 2.14
Mar 11 04:04:42 overo Bluetooth: L2CAP socket layer initialized
Mar 11 04:04:42 overo Bluetooth: SCO (Voice Link) ver 0.6
Mar 11 04:04:42 overo Bluetooth: SCO socket layer initialized
Mar 11 04:04:42 overo Bluetooth: RFCOMM TTY layer initialized
Mar 11 04:04:42 overo Bluetooth: RFCOMM socket layer initialized
Mar 11 04:04:42 overo Bluetooth: RFCOMM ver 1.11
Mar 11 04:04:42 overo Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Mar 11 04:04:42 overo Bluetooth: BNEP filters: protocol multicast
Mar 11 04:04:42 overo Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Mar 11 04:04:42 overo ThumbEE CPU extension supported.
Mar 11 04:04:42 overo VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
Mar 11 04:04:42 overo fbcvt: 1024x768@60: CVT Name - .786M3-R
Mar 11 04:04:42 overo Console: switching to colour frame buffer device 128x48
Mar 11 04:04:42 overo regulator_init_complete: incomplete constraints, leaving VDAC on
Mar 11 04:04:42 overo twl_rtc twl_rtc: setting system clock to 2011-03-11 04:04:25 UTC (1299816265)
Mar 11 04:04:42 overo JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Mar 11 04:04:42 overo VFS: Mounted root (jffs2 filesystem) on device 31:4.
Mar 11 04:04:42 overo devtmpfs: mounted
Mar 11 04:04:42 overo Freeing init memory: 936K
Mar 11 04:04:42 overo udev: starting version 151
Mar 11 04:04:42 overo udev: renamed network interface eth0 to eth1
Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial
Mar 11 04:04:42 overo USB Serial support registered for generic
Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial_generic
Mar 11 04:04:42 overo usbserial: USB Serial Driver core
Mar 11 04:04:42 overo ads7846 spi1.0: touchscreen, irq 274
Mar 11 04:04:42 overo ads7846 spi1.0: no device detected, test read result was 0x00000000
Mar 11 04:04:42 overo USB Serial support registered for GSM modem (1-port)
Mar 11 04:04:42 overo usbcore: registered new interface driver option
Mar 11 04:04:42 overo option: v0.7.2:USB Driver for GSM modems
Mar 11 04:04:42 overo NET: Registered protocol family 10
Mar 11 04:04:42 overo ntpd[837]: ntpd 4.2.4p7@1.1607 Thu Sep  9 23:45:54 UTC 2010 (1)
Mar 11 04:04:42 overo ntpd[838]: precision = 30.000 usec
Mar 11 04:04:42 overo ntpd[838]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Mar 11 04:04:42 overo ntpd[838]: Listening on interface #1 wildcard, ::#123 Disabled
Mar 11 04:04:42 overo ntpd[838]: Listening on interface #2 lo, ::1#123 Enabled
Mar 11 04:04:42 overo ntpd[838]: Listening on interface #3 lo, 127.0.0.1#123 Enabled
Mar 11 04:04:42 overo ntpd[838]: kernel time sync status 0040
Mar 11 04:04:42 overo ntpd[838]: frequency initialized 0.000 PPM from /etc/ntp.drift
Mar 11 04:07:58 overo ntpd[838]: synchronized to LOCAL(0), stratum 14
Mar 11 04:07:58 overo ntpd[838]: kernel time sync status change 0001
Mar 11 04:09:43 overo ntpd[838]: failed to initialize interface for address fe80::215:c9ff:fe28:d9c1
Mar 11 04:09:43 overo ntpd[838]: Listening on interface #5 eth1, 192.168.50.110#123 Enabled
Mar 11 04:14:41 overo syslog-ng[818]: Log statistics; processed='center(queued)=1515', processed='center(received)=326', processed='destination(messages)=214', processed='destination(mailinfo)=0', processed='destination(mailwarn)=0', processed='destination(console)=0', processed='destination(ppp)=0', processed='destination(authlog)=2', processed='destination(user)=0', processed='destination(lpr)=0', processed='destination(daemon)=16', processed='destination(uucp)=0', processed='destination(cron)=0', processed='destination(kern)=307', processed='destination(console_all)=326', processed='destination(mail)=0', processed='destination(xconsole)=0', processed='destination(debug)=324', processed='destination(syslog)=326', processed='destination(newserr)=0', processed='destination(newscrit)=0', processed='destination(newsnotice)=0', processed='destination(mailerr)=0', processed='source(src)=326', processed='source(net)=0'
Mar 11 04:14:43 overo ntpd[838]: failed to initialize interface for address fe80::215:c9ff:fe28:d9c1





------------------------------------------------------------------------------
Benefiting from Server Virtualization: Beyond Initial Workload
Consolidation -- Increasing the use of server virtualization is a top
priority.Virtualization can reduce costs, simplify management, and improve
application availability and disaster protection. Learn more about boosting
the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
_______________________________________________
gumstix-users mailing list


------------------------------------------------------------------------------
Benefiting from Server Virtualization: Beyond Initial Workload
Consolidation -- Increasing the use of server virtualization is a top
priority.Virtualization can reduce costs, simplify management, and improve
application availability and disaster protection. Learn more about boosting
the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users



------------------------------------------------------------------------------
Benefiting from Server Virtualization: Beyond Initial Workload
Consolidation -- Increasing the use of server virtualization is a top
priority.Virtualization can reduce costs, simplify management, and improve
application availability and disaster protection. Learn more about boosting
the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users
Reply | Threaded
Open this post in threaded view
|

Re: Wireless not found on stock image.

Steven
I just checked both of those boot logs, they both were running at 500, so it is probably not a clock issue.

On Tue, Apr 19, 2011 at 3:26 PM, J. L. <[hidden email]> wrote:
I have been told overo com's default to 600, I run my fire at 720 with no major issues.



On Tue, Apr 19, 2011 at 12:17 PM, Steven <[hidden email]> wrote:
Hm... I thought the COMs by default boot to 500MHz because 600 and 720 are overclock modes.

Could it be the new Fires have a bug?  I have a Fire FE also and it works fine.

On Tue, Apr 19, 2011 at 3:10 AM, David Brandt <[hidden email]> wrote:
I'm seeing similar problems on a Overo Air board at 600MHz.

I tried many different options and many different images both new and older. I suspect broken hardware so I just ordered a new board and will try again.



________________________________________
Fra: Alan Brumley [[hidden email]]
Sendt: 19. april 2011 06:10
Til: 'General mailing list for gumstix users.'
Emne: Re: [Gumstix-users] Wireless not found on stock image.

So I've received my replacement gumstix and it has the same problem.  No wifi on boot.
I know, I know.  I wouldn't believe me either _EXCEPT_ I have another gumstix here I've borrowed and it works fine.
I have my image installed on an SD card and if I take the working setup and swap out my "broken" overo fire into the working setup (same SD image and expander board), I don't have wifi anymore.   However, now I have the luxury of capturing a working boot and a failed boot and diff'ing them.
Two things jump out...
My working setup I believe is an FE version because it's only running at 600Mhz.  My failed version is a Fire at 720MHz
However in the working setup, I see the entry:
mmc1: new SDIO card at address 0001
which isn't there in the failing boot.
Obviously, all the libertas stuff is missing from the failed boot because it's not finding any relevant hardware.

Makes me think of two possabilities...
a timing issue in the kernel when running at 720Mhz, or a GPIO is getting set in uBoot that is holding the wifi in reset.
I'm having a hard time believing the timing issue just based on the number of people who have had success.
I can't find any documentation on how you would go about disabling wifi from within uboot, so I can't check that I am.  I never modified uBoot on either gumstix (the prevous failed, or current failed).
I saw instructions on how to enable/disable wireless in linux (via GPIO16), but nothing there seemed to make a difference.  i.e. kernel never seems to see it get inserted or removed.

Sorry for the book, but does anybody have any suggestions?
I've dropped the logs at http://www.onlinecnc.com/gumstix/ if you want to take a look.

Thanks for any help,
Alan




From: Alan Brumley [mailto:[hidden email]]
Sent: Thursday, March 10, 2011 10:35 PM
To: [hidden email]
Subject: [Gumstix-users] Wireless not found on stock image.


I apologize in advance for regurgitating so much information, I'm just trying to help speed things along.
I've looked for a two nights now and can't find a solution to unstick me on this problem.  Thanks for any help you can give.

I have an overo fire and a tobi board.  It just arrived from gumstix last week and is running the factory firmware that came with it.

I'm trying to use the wired ethernet controller as well as the wifi controller.

Out of the box, the wired connection seems to be happy as eth1
eth1      Link encap:Ethernet  HWaddr 00:15:C9:28:D9:C1
         inet addr:192.168.50.110  Bcast:192.168.50.255  Mask:255.255.255.0

The problem is getting the wifi up.   I've modified my /etc/network/interfaces as shown below but when I try

"ifup wlan0"    I get the following error:
Error for wireless request "Set Mode" (8B06) :
   SET failed on device wlan0 ; No such device.
Error for wireless request "Set ESSID" (8B1A) :
   SET failed on device wlan0 ; No such device.
SIOCSIFADDR: No such device
wlan0: unknown interface: No such device
SIOCSIFNETMASK: No such device
SIOCGIFADDR: No such device
SIOCSIFBROADCAST: No such device
wlan0: unknown interface: No such device
Failed to bring up wlan0.

I am trying to join a simple non-encrypted ad-hoc network w/ static IPs.


I have the following modules loaded on a clean boot:
root@overo:~# lsmod
Module                  Size  Used by
bufferclass_ti          3555  0
omaplfb                 8304  0
pvrsrvkm              126292  2 bufferclass_ti,omaplfb
ipv6                  219860  18
option                 16236  0
ads7846                 8515  0
usbserial              30552  1 option
root@overo:~#

I've also tried modprobing various other apparent wifi modules as I could find, but none seemed to help.
------------------------------------------------------------
here is my interfaces file.

/etc/network/interfaces
root@overo:~# cat /etc/network/interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
#
auto lo
iface lo inet loopback

#
# Wired interfaces
#

#auto eth0
#iface eth0 inet dhcp
#iface eth1 inet dhcp

#
# Wireless interfaces
#

# Example of an unencrypted (no WEP or WPA) wireless connection
# that connects to any available access point:
#

allow-hotplug wlan0
auto wlan0
iface wlan0 inet static
address 192.168.2.2
netmask 255.255.255.0
wireless-mode ad-hoc
wireless-essid gumstix-network

#allow-hotplug wlan0
#iface wlan0 inet static
#       wireless_mode ad-hoc
#       wireless_essid HSMM-MESH
#       address 10.10.11.22
#       netmask 255.0.0.0
#       network 10.0.0.0

# Example of an unencrypted (no WEP or WPA) wireless connection
<SNIP>   I can promise that every line after is a comment line and the stock file.

I thought this device was available over usb, but when I run
root@overo:~# lsusb -t
Bus#  2
`-Dev#   1 Vendor 0x1d6b Product 0x0002
Bus#  1
`-Dev#   1 Vendor 0x1d6b Product 0x0002
root@overo:~#

there's nothing there.
I do have a blue and green LED lit however.

Here are my start up messages.
root@overo:~# cat /var/log/messages
Mar 11 04:04:41 overo Linux version 2.6.34 ([hidden email]) (gcc version 4.3.3 (GCC) ) #1 Wed Oct 20 10:22:48 PDT 2010
Mar 11 04:04:41 overo CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
Mar 11 04:04:41 overo CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Mar 11 04:04:41 overo Machine: Gumstix Overo
Mar 11 04:04:41 overo Memory policy: ECC disabled, Data cache writeback
Mar 11 04:04:41 overo syslog-ng[818]: syslog-ng starting up; version='2.0.5'
Mar 11 04:04:41 overo OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
Mar 11 04:04:41 overo SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
Mar 11 04:04:41 overo Reserving 12582912 bytes SDRAM for VRAM
Mar 11 04:04:41 overo Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Mar 11 04:04:41 overo Kernel command line: console=ttyS2,115200n8 mpurate=500 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi root=/dev/mtdblock4 rw rootfstype=jffs2
Mar 11 04:04:41 overo PID hash table entries: 1024 (order: 0, 4096 bytes)
Mar 11 04:04:41 overo Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 11 04:04:41 overo Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mar 11 04:04:41 overo Memory: 128MB 128MB = 256MB total
Mar 11 04:04:41 overo Memory: 240920k/240920k available, 21224k reserved, 0K highmem
Mar 11 04:04:41 overo Virtual kernel memory layout:
Mar 11 04:04:41 overo vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Mar 11 04:04:41 overo fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
Mar 11 04:04:41 overo DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
Mar 11 04:04:41 overo vmalloc : 0xd0800000 - 0xf8000000   ( 632 MB)
Mar 11 04:04:41 overo lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
Mar 11 04:04:41 overo modules : 0xbf000000 - 0xc0000000   (  16 MB)
Mar 11 04:04:41 overo .init : 0xc0008000 - 0xc00f2000   ( 936 kB)
Mar 11 04:04:41 overo .text : 0xc00f2000 - 0xc05f6000   (5136 kB)
Mar 11 04:04:41 overo .data : 0xc061a000 - 0xc0659400   ( 253 kB)
Mar 11 04:04:41 overo Hierarchical RCU implementation.
Mar 11 04:04:41 overo NR_IRQS:402
Mar 11 04:04:41 overo Clocking rate (Crystal/Core/MPU): 26.0/224/500 MHz
Mar 11 04:04:41 overo Reprogramming SDRC clock to 224791666 Hz
Mar 11 04:04:41 overo GPMC revision 5.0
Mar 11 04:04:41 overo IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
Mar 11 04:04:41 overo Total of 96 interrupts on 1 active controller
Mar 11 04:04:41 overo OMAP GPIO hardware version 2.5
Mar 11 04:04:41 overo OMAP clockevent source: GPTIMER1 at 32768 Hz
Mar 11 04:04:41 overo Console: colour dummy device 80x30
Mar 11 04:04:41 overo Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696)
Mar 11 04:04:41 overo Mount-cache hash table entries: 512
Mar 11 04:04:41 overo CPU: Testing write buffer coherency: ok
Mar 11 04:04:41 overo devtmpfs: initialized
Mar 11 04:04:41 overo regulator: core version 0.5
Mar 11 04:04:41 overo NET: Registered protocol family 16
Mar 11 04:04:41 overo Found NAND on CS0
Mar 11 04:04:41 overo hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
Mar 11 04:04:41 overo Switched to new clocking rate (Crystal/Core/MPU): 26.0/500/224 MHz
Mar 11 04:04:41 overo OMAP DMA hardware revision 4.0
Mar 11 04:04:41 overo bio: create slab <bio-0> at 0
Mar 11 04:04:41 overo SCSI subsystem initialized
Mar 11 04:04:41 overo usbcore: registered new interface driver usbfs
Mar 11 04:04:41 overo usbcore: registered new interface driver hub
Mar 11 04:04:41 overo usbcore: registered new device driver usb
Mar 11 04:04:41 overo i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
Mar 11 04:04:41 overo twl4030: PIH (irq 7) chaining IRQs 368..375
Mar 11 04:04:41 overo twl4030: power (irq 373) chaining IRQs 376..383
Mar 11 04:04:41 overo twl4030: gpio (irq 368) chaining IRQs 384..401
Mar 11 04:04:41 overo regulator: VUSB1V5: 1500 mV normal standby
Mar 11 04:04:41 overo regulator: VUSB1V8: 1800 mV normal standby
Mar 11 04:04:41 overo regulator: VUSB3V1: 3100 mV normal standby
Mar 11 04:04:41 overo twl4030_usb twl4030_usb: Initialized TWL4030 USB module
Mar 11 04:04:41 overo regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
Mar 11 04:04:41 overo regulator: VDAC: 1800 mV normal standby
Mar 11 04:04:41 overo regulator: VDVI: 1800 mV normal standby
Mar 11 04:04:41 overo i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz
Mar 11 04:04:41 overo Advanced Linux Sound Architecture Driver Version 1.0.22.1.
Mar 11 04:04:41 overo Bluetooth: Core ver 2.15
Mar 11 04:04:41 overo NET: Registered protocol family 31
Mar 11 04:04:41 overo Bluetooth: HCI device and connection manager initialized
Mar 11 04:04:41 overo Bluetooth: HCI socket layer initialized
Mar 11 04:04:41 overo cfg80211: Calling CRDA to update world regulatory domain
Mar 11 04:04:41 overo Switching to clocksource 32k_counter
Mar 11 04:04:41 overo musb_hdrc: version 6.0, musb-dma, host, debug=0
Mar 11 04:04:41 overo musb_hdrc musb_hdrc: MUSB HDRC host driver
Mar 11 04:04:42 overo musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
Mar 11 04:04:42 overo usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Mar 11 04:04:42 overo usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 11 04:04:42 overo usb usb1: Product: MUSB HDRC host driver
Mar 11 04:04:42 overo usb usb1: Manufacturer: Linux 2.6.34 musb-hcd
Mar 11 04:04:42 overo usb usb1: SerialNumber: musb_hdrc
Mar 11 04:04:42 overo hub 1-0:1.0: USB hub found
Mar 11 04:04:42 overo hub 1-0:1.0: 1 port detected
Mar 11 04:04:42 overo musb_hdrc musb_hdrc: USB Host mode controller at fa0ab000 using DMA, IRQ 92
Mar 11 04:04:42 overo NET: Registered protocol family 2
Mar 11 04:04:42 overo IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Mar 11 04:04:42 overo TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Mar 11 04:04:42 overo TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
Mar 11 04:04:42 overo TCP: Hash tables configured (established 8192 bind 8192)
Mar 11 04:04:42 overo TCP reno registered
Mar 11 04:04:42 overo UDP hash table entries: 256 (order: 0, 4096 bytes)
Mar 11 04:04:42 overo UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Mar 11 04:04:42 overo NET: Registered protocol family 1
Mar 11 04:04:42 overo RPC: Registered udp transport module.
Mar 11 04:04:42 overo RPC: Registered tcp transport module.
Mar 11 04:04:42 overo RPC: Registered tcp NFSv4.1 backchannel transport module.
Mar 11 04:04:42 overo VFS: Disk quotas dquot_6.5.2
Mar 11 04:04:42 overo Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 11 04:04:42 overo JFFS2 version 2.2. (NAND) (SUMMARY)  Â© 2001-2006 Red Hat, Inc.
Mar 11 04:04:42 overo msgmni has been set to 470
Mar 11 04:04:42 overo alg: No test for stdrng (krng)
Mar 11 04:04:42 overo Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Mar 11 04:04:42 overo io scheduler noop registered
Mar 11 04:04:42 overo io scheduler deadline registered
Mar 11 04:04:42 overo io scheduler cfq registered (default)
Mar 11 04:04:42 overo OMAP DSS rev 2.0
Mar 11 04:04:42 overo OMAP DISPC rev 3.0
Mar 11 04:04:42 overo OMAP VENC rev 2
Mar 11 04:04:42 overo OMAP DSI rev 1.0
Mar 11 04:04:42 overo Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Mar 11 04:04:42 overo serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
Mar 11 04:04:42 overo serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
Mar 11 04:04:42 overo serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
Mar 11 04:04:42 overo console [ttyS2] enabled
Mar 11 04:04:42 overo brd: module loaded
Mar 11 04:04:42 overo loop: module loaded
Mar 11 04:04:42 overo omap2-nand driver initializing
Mar 11 04:04:42 overo NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)
Mar 11 04:04:42 overo cmdlinepart partition parsing not available
Mar 11 04:04:42 overo Creating 5 MTD partitions on "omap2-nand.0":
Mar 11 04:04:42 overo 0x000000000000-0x000000080000 : "xloader"
Mar 11 04:04:42 overo 0x000000080000-0x000000240000 : "uboot"
Mar 11 04:04:42 overo 0x000000240000-0x000000280000 : "uboot environment"
Mar 11 04:04:42 overo 0x000000280000-0x000000680000 : "linux"
Mar 11 04:04:42 overo 0x000000680000-0x000010000000 : "rootfs"
Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.
Mar 11 04:04:42 overo smsc911x-mdio: probed
Mar 11 04:04:42 overo eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
Mar 11 04:04:42 overo net eth0: MAC Address: 00:15:c9:28:d9:c1
Mar 11 04:04:42 overo smsc911x: Driver version 2008-10-21.
Mar 11 04:04:42 overo usbcore: registered new interface driver asix
Mar 11 04:04:42 overo usbcore: registered new interface driver cdc_ether
Mar 11 04:04:42 overo ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mar 11 04:04:42 overo ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
Mar 11 04:04:42 overo ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
Mar 11 04:04:42 overo ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
Mar 11 04:04:42 overo ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
Mar 11 04:04:42 overo usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Mar 11 04:04:42 overo usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 11 04:04:42 overo usb usb2: Product: OMAP-EHCI Host Controller
Mar 11 04:04:42 overo usb usb2: Manufacturer: Linux 2.6.34 ehci_hcd
Mar 11 04:04:42 overo usb usb2: SerialNumber: ehci-omap.0
Mar 11 04:04:42 overo hub 2-0:1.0: USB hub found
Mar 11 04:04:42 overo hub 2-0:1.0: 3 ports detected
Mar 11 04:04:42 overo Initializing USB Mass Storage driver...
Mar 11 04:04:42 overo usbcore: registered new interface driver usb-storage
Mar 11 04:04:42 overo USB Mass Storage support registered.
Mar 11 04:04:42 overo udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)
Mar 11 04:04:42 overo mice: PS/2 mouse device common for all mice
Mar 11 04:04:42 overo twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
Mar 11 04:04:42 overo i2c /dev entries driver
Mar 11 04:04:42 overo OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
Mar 11 04:04:42 overo twl4030_wdt: probe of twl4030_wdt failed with error -16
Mar 11 04:04:42 overo Bluetooth: HCI UART driver ver 2.2
Mar 11 04:04:42 overo Bluetooth: HCI H4 protocol initialized
Mar 11 04:04:42 overo Bluetooth: HCI BCSP protocol initialized
Mar 11 04:04:42 overo Bluetooth: HCILL protocol initialized
Mar 11 04:04:42 overo usbcore: registered new interface driver usbhid
Mar 11 04:04:42 overo usbhid: USB HID core driver
Mar 11 04:04:42 overo usbcore: registered new interface driver snd-usb-audio
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-0
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-1
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-2
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-3
Mar 11 04:04:42 overo No device for DAI omap-mcbsp-dai-4
Mar 11 04:04:42 overo overo SoC init
Mar 11 04:04:42 overo asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
Mar 11 04:04:42 overo ALSA device list:
Mar 11 04:04:42 overo #0: overo (twl4030)
Mar 11 04:04:42 overo oprofile: using arm/armv7
Mar 11 04:04:42 overo TCP cubic registered
Mar 11 04:04:42 overo NET: Registered protocol family 17
Mar 11 04:04:42 overo NET: Registered protocol family 15
Mar 11 04:04:42 overo Bluetooth: L2CAP ver 2.14
Mar 11 04:04:42 overo Bluetooth: L2CAP socket layer initialized
Mar 11 04:04:42 overo Bluetooth: SCO (Voice Link) ver 0.6
Mar 11 04:04:42 overo Bluetooth: SCO socket layer initialized
Mar 11 04:04:42 overo Bluetooth: RFCOMM TTY layer initialized
Mar 11 04:04:42 overo Bluetooth: RFCOMM socket layer initialized
Mar 11 04:04:42 overo Bluetooth: RFCOMM ver 1.11
Mar 11 04:04:42 overo Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Mar 11 04:04:42 overo Bluetooth: BNEP filters: protocol multicast
Mar 11 04:04:42 overo Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Mar 11 04:04:42 overo ThumbEE CPU extension supported.
Mar 11 04:04:42 overo VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
Mar 11 04:04:42 overo fbcvt: 1024x768@60: CVT Name - .786M3-R
Mar 11 04:04:42 overo Console: switching to colour frame buffer device 128x48
Mar 11 04:04:42 overo regulator_init_complete: incomplete constraints, leaving VDAC on
Mar 11 04:04:42 overo twl_rtc twl_rtc: setting system clock to 2011-03-11 04:04:25 UTC (1299816265)
Mar 11 04:04:42 overo JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Mar 11 04:04:42 overo VFS: Mounted root (jffs2 filesystem) on device 31:4.
Mar 11 04:04:42 overo devtmpfs: mounted
Mar 11 04:04:42 overo Freeing init memory: 936K
Mar 11 04:04:42 overo udev: starting version 151
Mar 11 04:04:42 overo udev: renamed network interface eth0 to eth1
Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial
Mar 11 04:04:42 overo USB Serial support registered for generic
Mar 11 04:04:42 overo usbcore: registered new interface driver usbserial_generic
Mar 11 04:04:42 overo usbserial: USB Serial Driver core
Mar 11 04:04:42 overo ads7846 spi1.0: touchscreen, irq 274
Mar 11 04:04:42 overo ads7846 spi1.0: no device detected, test read result was 0x00000000
Mar 11 04:04:42 overo USB Serial support registered for GSM modem (1-port)
Mar 11 04:04:42 overo usbcore: registered new interface driver option
Mar 11 04:04:42 overo option: v0.7.2:USB Driver for GSM modems
Mar 11 04:04:42 overo NET: Registered protocol family 10
Mar 11 04:04:42 overo ntpd[837]: ntpd 4.2.4p7@1.1607 Thu Sep  9 23:45:54 UTC 2010 (1)
Mar 11 04:04:42 overo ntpd[838]: precision = 30.000 usec
Mar 11 04:04:42 overo ntpd[838]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Mar 11 04:04:42 overo ntpd[838]: Listening on interface #1 wildcard, ::#123 Disabled
Mar 11 04:04:42 overo ntpd[838]: Listening on interface #2 lo, ::1#123 Enabled
Mar 11 04:04:42 overo ntpd[838]: Listening on interface #3 lo, 127.0.0.1#123 Enabled
Mar 11 04:04:42 overo ntpd[838]: kernel time sync status 0040
Mar 11 04:04:42 overo ntpd[838]: frequency initialized 0.000 PPM from /etc/ntp.drift
Mar 11 04:07:58 overo ntpd[838]: synchronized to LOCAL(0), stratum 14
Mar 11 04:07:58 overo ntpd[838]: kernel time sync status change 0001
Mar 11 04:09:43 overo ntpd[838]: failed to initialize interface for address fe80::215:c9ff:fe28:d9c1
Mar 11 04:09:43 overo ntpd[838]: Listening on interface #5 eth1, 192.168.50.110#123 Enabled
Mar 11 04:14:41 overo syslog-ng[818]: Log statistics; processed='center(queued)=1515', processed='center(received)=326', processed='destination(messages)=214', processed='destination(mailinfo)=0', processed='destination(mailwarn)=0', processed='destination(console)=0', processed='destination(ppp)=0', processed='destination(authlog)=2', processed='destination(user)=0', processed='destination(lpr)=0', processed='destination(daemon)=16', processed='destination(uucp)=0', processed='destination(cron)=0', processed='destination(kern)=307', processed='destination(console_all)=326', processed='destination(mail)=0', processed='destination(xconsole)=0', processed='destination(debug)=324', processed='destination(syslog)=326', processed='destination(newserr)=0', processed='destination(newscrit)=0', processed='destination(newsnotice)=0', processed='destination(mailerr)=0', processed='source(src)=326', processed='source(net)=0'
Mar 11 04:14:43 overo ntpd[838]: failed to initialize interface for address fe80::215:c9ff:fe28:d9c1





------------------------------------------------------------------------------
Benefiting from Server Virtualization: Beyond Initial Workload
Consolidation -- Increasing the use of server virtualization is a top
priority.Virtualization can reduce costs, simplify management, and improve
application availability and disaster protection. Learn more about boosting
the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
_______________________________________________
gumstix-users mailing list


------------------------------------------------------------------------------
Benefiting from Server Virtualization: Beyond Initial Workload
Consolidation -- Increasing the use of server virtualization is a top
priority.Virtualization can reduce costs, simplify management, and improve
application availability and disaster protection. Learn more about boosting
the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users



------------------------------------------------------------------------------
Benefiting from Server Virtualization: Beyond Initial Workload
Consolidation -- Increasing the use of server virtualization is a top
priority.Virtualization can reduce costs, simplify management, and improve
application availability and disaster protection. Learn more about boosting
the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users



------------------------------------------------------------------------------
Benefiting from Server Virtualization: Beyond Initial Workload
Consolidation -- Increasing the use of server virtualization is a top
priority.Virtualization can reduce costs, simplify management, and improve
application availability and disaster protection. Learn more about boosting
the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users
Reply | Threaded
Open this post in threaded view
|

Re: Wireless not found on stock image.

Petar Durdevic
This post has NOT been accepted by the mailing list yet.
In reply to this post by Alan Brumley-3
Hi i have just bought a overo ironStorm

and i get the same error.

root@overo:/# iwconfig wlan0                                                                              
wlan0     No such device

i have tried a lot of different pre-build images, without any luck.

I hope somebody has some knowledge of this problem

Greetings

Petar