Quantcast

Overo FE vs IronStorm

classic Classic list List threaded Threaded
9 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Overo FE vs IronStorm

hobbesc7
Two questions regarding the IronStorm vs FE COM:

1.  Will my rootfs and kernel, that I currently use on the FE, work on the IronStorm?

2.  Will the IronStorm power consumption be significantly less than on the FE at low cpu frequencies?  I use the cpu freq "ondemand" governor, and generally my FE runs at 125 MHz.
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Overo FE vs IronStorm

Steven
1. Yes, depending you how old your FE is you might need to reconfigure
your bootloader to use a different serial port (i think /dev/ttyO2 vs
/dev/ttyS2)

2. Not certain, but I suspect it won't be significantly lower since at
low clock speed the SOC might not be dominating the power draw.

On Fri, Aug 24, 2012 at 12:23 PM, hobbesc7 <[hidden email]> wrote:

> Two questions regarding the IronStorm vs FE COM:
>
> 1.  Will my rootfs and kernel, that I currently use on the FE, work on the
> IronStorm?
>
> 2.  Will the IronStorm power consumption be significantly less than on the
> FE at low cpu frequencies?  I use the cpu freq "ondemand" governor, and
> generally my FE runs at 125 MHz.
>
>
>
> --
> View this message in context: http://gumstix.8.n6.nabble.com/Overo-FE-vs-IronStorm-tp4965213.html
> Sent from the Gumstix mailing list archive at Nabble.com.
>
> ------------------------------------------------------------------------------
> Live Security Virtual Conference
> Exclusive live event will cover all the ways today's security and
> threat landscape has changed and how IT managers can respond. Discussions
> will include endpoint security, mobile security and the latest in malware
> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> _______________________________________________
> gumstix-users mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/gumstix-users

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Overo FE vs IronStorm

Andreas Müller-2
In reply to this post by hobbesc7
On Fri, Aug 24, 2012 at 6:23 PM, hobbesc7 <[hidden email]> wrote:

> Two questions regarding the IronStorm vs FE COM:
>
> 1.  Will my rootfs and kernel, that I currently use on the FE, work on the
> IronStorm?
>
> 2.  Will the IronStorm power consumption be significantly less than on the
> FE at low cpu frequencies?  I use the cpu freq "ondemand" governor, and
> generally my FE runs at 125 MHz.
>
>
A bit off topic: After reading this I fell in love with "ondemand".
Unfortunately this love is tainted by the fact that I can not restart
the system. Neither shutdown -r nor pressing reset work for OveroWater
and OveroFireStorm. U-boot hangs before or during uncompressing
kernel. I tries different kernel versions / and latest u-boot
(2012.07). The only way out is unplugging power.
Anybody else facing this?

Andreas

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
gumstix-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/gumstix-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Overo FE vs IronStorm

hobbesc7
In reply to this post by Steven
Steven wrote
1. Yes, depending you how old your FE is you might need to reconfigure
your bootloader to use a different serial port (i think /dev/ttyO2 vs
/dev/ttyS2)
It turns out the answer to #1 is no.  I'm testing two new Ironstorms with the same MLO, u-boot, kernel, and rootfs that I use on the FEs.  (Flashed to NAND.)

I booted up both ironstorms with my usual SD card that has my images for flashing to NAND.  After removing the SD card and rebooting from NAND, however, both ironstorms have kernel crashes in the form of "Unable to handle kernel paging request at virtual address."
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Overo FE vs IronStorm

hobbesc7
Here's the boot output up until it hangs:

NAND read: device 0 offset 0x280000, size 0x400000
 4194304 bytes read: OK
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   Linux-3.2.0-24236-g513770d
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3451296 Bytes = 3.3 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Linux version 3.2.0-24236-g513770d (user@laptop) (gcc version 4.3.3 (GCC) ) #21 SMP Tue Jul 31 10:41:55 EDT 2012
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Gumstix Overo
[    0.000000] Reserving 12582912 bytes SDRAM for VRAM
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
[    0.000000] PERCPU: Embedded 8 pages/cpu @c103e000 s11200 r8192 d13376 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 126976
[    0.000000] Kernel command line: console=ttyO2,115200n8 mpurate=500 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapdss.def_disp=dvi root=ubi0:rootfs ubi.mtd=4 rootfstype=ubifs
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 500MB = 500MB total
[    0.000000] Memory: 494944k/494944k available, 29344k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xf8000000   ( 376 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc060550c   (6134 kB)
[    0.000000]       .init : 0xc0606000 - 0xc0659bc0   ( 335 kB)
[    0.000000]       .data : 0xc065a000 - 0xc06e08d0   ( 539 kB)
[    0.000000]        .bss : 0xc06e08f4 - 0xc0c35180   (5459 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:410
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 3695 kB
[    0.000000]  per task-struct memory footprint: 1152 bytes
[    0.000915] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
[    0.093749] pid_max: default: 32768 minimum: 301
[    0.094482] Security Framework initialized
[    0.094757] Mount-cache hash table entries: 512
[    0.099029] CPU: Testing write buffer coherency: ok
[    0.099914] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.101440] Brought up 1 CPUs
[    0.101470] SMP: Total of 1 processors activated (597.64 BogoMIPS).
[    0.121673] print_constraints: dummy:
[    0.123657] NET: Registered protocol family 16
[    0.124816] GPMC revision 5.0
[    0.135559] OMAP GPIO hardware version 2.5
[    0.149444] omap_mux_init: Add partition: #1: core, flags: 0
[    0.165954] Reprogramming SDRC clock to 332000000 Hz
[    0.165985] dpll3_m2_clk rate change failed: -22
[    0.166015] Found NAND on CS0
[    0.166015] Registering NAND on CS0
[    0.182250] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.200653]  omap-mcbsp.2: alias fck already exists
[    0.201446]  omap-mcbsp.3: alias fck already exists
[    0.207061] Calibrating delay loop (skipped) already calibrated this CPU
[    0.207275] Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
[    0.208801] OMAP DMA hardware revision 5.0
[    0.287719] bio: create slab <bio-0> at 0
[    0.293090] print_constraints: vads7846: 3300 mV
[    0.300354] SCSI subsystem initialized
[    0.311828] usbcore: registered new interface driver usbfs
[    0.313507] usbcore: registered new interface driver hub
[    0.314331] usbcore: registered new device driver usb
[    0.322265] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
[    0.333343] twl4030: PIH (irq 7) chaining IRQs 368..375
[    0.334045] twl4030: power (irq 373) chaining IRQs 376..383
[    0.337280] twl4030: gpio (irq 368) chaining IRQs 384..401
[    0.346588] print_constraints: VUSB1V5: 1500 mV normal standby
[    0.349212] print_constraints: VUSB1V8: 1800 mV normal standby
[    0.351989] print_constraints: VUSB3V1: 3100 mV normal standby
[    0.359069] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[    0.364807] print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
[    0.367462] print_constraints: VDAC: 1800 mV normal standby
[    0.370056] print_constraints: VDVI: 1800 mV normal standby
[    0.371063] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 400 kHz
[    0.381713] Switching to clocksource 32k_counter
[    0.517730] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    0.528106] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[    0.532592] NET: Registered protocol family 2
[    0.533477] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.535675] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.536468] TCP bind hash table entries: 16384 (order: 7, 589824 bytes)
[    0.546752] TCP: Hash tables configured (established 16384 bind 16384)
[    0.546874] TCP reno registered
[    0.546905] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    0.547271] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    0.548339] NET: Registered protocol family 1
[    0.549865] RPC: Registered named UNIX socket transport module.
[    0.549896] RPC: Registered udp transport module.
[    0.549926] RPC: Registered tcp transport module.
[    0.549957] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.550933] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.763610] VFS: Disk quotas dquot_6.5.2
[    0.763977] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.767456] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.768768] msgmni has been set to 966
[    0.773590] io scheduler noop registered
[    0.773620] io scheduler deadline registered
[    0.773895] io scheduler cfq registered (default)
[    0.778411] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.786895] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[    0.789184] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[    0.790679] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
[    1.446594] console [ttyO2] enabled
[    1.451721] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
[    1.501159] brd: module loaded
[    1.528961] loop: module loaded
[    1.542419] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.549621] omap2-nand driver initializing
[    1.554626] ONFI flash detected
[    1.558227] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
[    1.568298] Creating 5 MTD partitions on "omap2-nand.0":
[    1.574127] 0x000000000000-0x000000080000 : "xloader"
[    1.588653] 0x000000080000-0x000000240000 : "uboot"
[    1.600463] 0x000000240000-0x000000280000 : "uboot environment"
[    1.612640] 0x000000280000-0x000000680000 : "linux"
[    1.625610] 0x000000680000-0x000020000000 : "rootfs"
[    1.914978] OneNAND driver initializing
[    1.921997] UBI: attaching mtd4 to ubi0
[    1.926025] UBI: physical eraseblock size:   131072 bytes (128 KiB)
[    1.932830] UBI: logical eraseblock size:    129024 bytes
[    1.938568] UBI: smallest flash I/O unit:    2048
[    1.943511] UBI: sub-page size:              512
[    1.948394] UBI: VID header offset:          512 (aligned 512)
[    1.954559] UBI: data offset:                2048
[    3.144622] UBI: max. sequence number:       7
[    3.176147] UBI: attached mtd4 to ubi0
[    3.180206] UBI: MTD device name:            "rootfs"
[    3.185516] UBI: MTD device size:            505 MiB
[    3.190765] UBI: number of good PEBs:        4044
[    3.195770] UBI: number of bad PEBs:         0
[    3.200408] UBI: number of corrupted PEBs:   0
[    3.205139] UBI: max. allowed volumes:       128
[    3.209960] UBI: wear-leveling threshold:    4096
[    3.214965] UBI: number of internal volumes: 1
[    3.219696] UBI: number of user volumes:     1
[    3.224334] UBI: available PEBs:             0
[    3.229064] UBI: total number of reserved PEBs: 4044
[    3.234313] UBI: number of PEBs reserved for bad PEB handling: 40
[    3.240692] UBI: max/mean erase counter: 3/1
[    3.245239] UBI: image sequence number:  664746653
[    3.250823] UBI: background thread "ubi_bgt0d" started, PID 520
[    3.259674] smsc911x: Driver version 2008-10-21
[    3.272460] smsc911x-mdio: probed
[    3.276580] smsc911x smsc911x.0: eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
[    3.286987] smsc911x smsc911x.0: eth0: MAC Address: 00:15:c9:28:ea:32
[    3.293914] smsc911x: Driver version 2008-10-21
[    3.300720] usbcore: registered new interface driver asix
[    3.307373] usbcore: registered new interface driver cdc_ether
[    3.314361] usbcore: registered new interface driver net1080
[    3.321075] usbcore: registered new interface driver cdc_subset
[    3.328033] usbcore: registered new interface driver zaurus
[    3.333953] cdc_ncm: 04-Aug-2011
[    3.338134] usbcore: registered new interface driver cdc_ncm
[    3.346160] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.358886] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[    4.370330] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[    4.378875] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[    4.398010] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[    4.405303] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.412536] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.420166] usb usb1: Product: OMAP-EHCI Host Controller
[    4.425781] usb usb1: Manufacturer: Linux 3.2.0-24236-g513770d ehci_hcd
[    4.432769] usb usb1: SerialNumber: ehci-omap.0
[    4.442779] hub 1-0:1.0: USB hub found
[    4.447052] hub 1-0:1.0: 3 ports detected
[    4.485321] usbcore: registered new interface driver cdc_wdm
[    4.491271] Initializing USB Mass Storage driver...
[    4.497283] usbcore: registered new interface driver usb-storage
[    4.503753] USB Mass Storage support registered.
[    4.510253] usbcore: registered new interface driver libusual
[    4.517211] usbcore: registered new interface driver usbtest
[    4.525360] mousedev: PS/2 mouse device common for all mice
[    4.537353] ads7846 spi1.0: touchscreen, irq 274
[    4.544067] ads7846 spi1.0: no device detected, test read result was 0x00000FFF
[    4.558746] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
[    4.577880] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[    4.586669] i2c /dev entries driver
[    4.594360] Driver for 1-wire Dallas network protocol.
[    4.604095] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    4.611938] twl4030_wdt twl4030_wdt: Failed to register misc device
[    4.618804] twl4030_wdt: probe of twl4030_wdt failed with error -16
[    4.629333] cpuidle: using governor ladder
[    4.633850] cpuidle: using governor menu
[    4.780975] usb 1-2: new high-speed USB device number 2 using ehci-omap
[    4.870544] usbcore: registered new interface driver usbhid
[    4.876586] usbhid: USB HID core driver
[    4.880615] oprofile: hardware counters not available
[    4.885986] oprofile: using timer interrupt.
[    4.891265] TCP cubic registered
[    4.894683] Initializing XFRM netlink socket
[    4.899414] NET: Registered protocol family 17
[    4.904174] NET: Registered protocol family 15
[    4.909240] Registering the dns_resolver key type
[    4.914916] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    4.923126] ThumbEE CPU extension supported.
[    5.017150] clock: disabling unused clocks to save power
[    5.031921] regulator_init_complete: VDVI: incomplete constraints, leaving on
[    5.040191] regulator_init_complete: VDAC: incomplete constraints, leaving on
[    5.050659] regulator_init_complete: vads7846: incomplete constraints, leaving on
[    5.095611] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[    5.108551] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:14:01 UTC (946685641)
[    5.183135] UBIFS: recovery needed
[    5.274841] UBIFS: recovery completed
[    5.278747] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    5.285156] UBIFS: file system size:   514676736 bytes (502614 KiB, 490 MiB, 3989 LEBs)
[    5.293640] UBIFS: journal size:       9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
[    5.301361] UBIFS: media format:       w4/r0 (latest is w4/r0)
[    5.307525] UBIFS: default compressor: lzo
[    5.311859] UBIFS: reserved for root:  0 bytes (0 KiB)
[    5.318237] VFS: Mounted root (ubifs filesystem) on device 0:13.
[    5.325042] Freeing init memory: 332K
[    5.468688] mmc1: new SDIO card at address 0001
[    5.844268] udevd (629): /proc/629/oom_adj is deprecated, please use /proc/629/oom_score_adj instead.
[    5.980010] [<c001b42c>] (unwind_backtrace+0x0/0xf4) from [<c0247b4c>] (do_raw_spin_unlock+0x94/0xbc)
[    5.980102] BUG: recent printk recursion!
[    5.980102] <1>Unable to handle kernel paging request at virtual address 60000192
[    6.001922] pgd = de55c000
[    6.004791] [60000192] *pgd=00000000
[    6.008575] Internal error: Oops: 80000005 [#1] SMP
[    6.013702] Modules linked in:
[    6.016937] CPU: 0    Not tainted  (3.2.0-24236-g513770d #21)
[    6.023010] PC is at 0x60000192
[    6.026336] LR is at unwind_frame+0x7c/0x4c8
[    6.030822] pc : [<60000192>]    lr : [<c001afe0>]    psr: a00001b3
[    6.030822] sp : de553cac  ip : 7fe52d1c  fp : 00000000
[    6.042938] r10: 0000000f  r9 : 0000006c  r8 : c06f25a6
[    6.048461] r7 : c06f254c  r6 : 00000000  r5 : c06b260c  r4 : c06f25a6
[    6.055328] r3 : 00000000  r2 : de553fb0  r1 : 00000001  r0 : c0454a9c
[    6.062225] Flags: NzCv  IRQs off  FIQs on  Mode SVC_32  ISA Thumb  Segment user
[    6.070037] Control: 10c5387d  Table: 9e55c019  DAC: 00000015
[    6.076110] Process udevd (pid: 629, stack limit = 0xde5522f8)
[    6.082244] Stack: (0xde553cac to 0xde554000)
[    6.086853] 3ca0:                            c045462c de553cfd c06b260c 00000000 c0078b00
[    6.095489] 3cc0: 00000000 de553cfd de553cfd c0053024 de553cfd c0053824 0000002e de553cee
[    6.104095] 3ce0: 00000000 60000193 00000001 205bfbfc 35202020 3038392e 5d303130 c06d0020
[    6.112731] 3d00: c001b42c 00008600 de553d14 c001b08c 00000001 c103fbfc c00d1d18 c00d2668
[    6.121368] 3d20: 00000004 de552000 de4f72b8 c001b42c de553da4 de4f72b4 c04561bc de4f72b4
[    6.130004] 3d40: 00000000 4018f288 de553da4 c0450c38 c0247b4c c0017cdc c05530b8 c001b42c
[    6.138641] 3d60: c001b42c c0247b4c c0247b4c c04561bc de4f72b4 c001b42c de553d80 c001b4a0
[    6.147277] 3d80: 4010bda8 de553da8 c0247b4c c0247b4c de552000 de4f72b8 4010bda8 de553da8
[    6.155914] 3da0: c0247b4c c001b438 de4f72b4 de4f72b8 60000113 c045462c de4f72b8 00000001
[    6.164550] 3dc0: de4f72b8 c023e8d0 dece6180 de552000 de4f7260 c00783c0 00000000 4018f288
[    6.173156] 3de0: 4010bda8 c0089850 00034690 de552000 de4f7260 de553fb0 4018f288 c04561bc
[    6.181793] 3e00: c0c1b1c4 00000000 00000000 c008adf4 00000017 dece6180 dece6180 00000001
[    6.190429] 3e20: 00000000 00000000 00000000 00000136 de553e30 de552000 000001ce de553e38
[    6.199066] 3e40: dec46ca8 dece6180 00000001 0000002c 00000000 decb64e0 00000136 c0227fa0
[    6.207702] 3e60: 0000002c c00c9660 0000002c 00000000 91827364 de553e74 de553e74 de553e7c
[    6.216339] 3e80: de553e7c 00000000 00000001 00000136 00000000 de553eb8 decb64e0 00000000
[    6.224975] 3ea0: de552000 00000002 00000000 00000000 60000013 c0c1b1c4 00000001 c008cc48
[    6.233581] 3ec0: 00000001 00000000 00000000 c0136e34 00000000 00000000 00000000 00000001
[    6.242218] 3ee0: 00000000 c0674e10 40000010 00000017 c0674e80 de553fb0 00000000 4018f288
[    6.250854] 3f00: 4010bda8 c0008400 c0136e34 00000000 de552000 00000000 00000000 00000001
[    6.259490] 3f20: decb64e8 00000001 00000136 00000000 00000000 00000000 4007f000 decb64e8
[    6.268127] 3f40: 0000002c dec46c20 00000002 00000000 de552000 00000000 00031f44 c00fd734
[    6.276763] 3f60: 00000000 00000000 00000136 00000000 decb64e0 4007f000 0000002c c00fd838
[    6.285400] 3f80: 00000162 00000000 4007f000 c0013dec 0000002c 400f01a4 40000010 ffffffff
[    6.294006] 3fa0: 00000003 00000000 8bc12bd6 c0454a9c 4018f284 40189a34 8bc12bd6 400b7650
[    6.302642] 3fc0: 400b78fc 00000001 40188f5c 00000003 00000000 00000000 8bc12bd6 4010bda8
[    6.311279] 3fe0: bee26cd8 bee26cb8 400f0674 400f01a4 40000010 ffffffff ffbffe7f ffbb7fff
[    6.319946] [<c001afe0>] (unwind_frame+0x7c/0x4c8) from [<c00d1d18>] (____pagevec_lru_add_fn+0x0/0xfc)
[    6.329772] [<c00d1d18>] (____pagevec_lru_add_fn+0x0/0xfc) from [<de553da4>] (0xde553da4)
[    6.338409] Code: bad PC value
[    6.341796] ---[ end trace e6b46370220e0140 ]---
[    6.433776] alignment: ignoring faults is unsafe on this CPU.  Defaulting to fixup mode.
[    7.013427] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xe08d8000, IRQ: 336

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Overo FE vs IronStorm

hobbesc7
Should the way I make a ubi image and flash it to the NAND change at all for the IronStorm from the FE?

I'm following the instructions in Method 2 at

http://www.sakoman.com/OMAP/how-to-write-an-ubifs-rootfs-image-to-nand.html?utm_source%3Dfeedburner%26utm_medium%3Dtwitter%26utm_campaign%3DFeed:+BeagleBoard+%28BeagleBoard.org%29

to make the ubi image, and then the instructions at

http://www.gumstix.org/how-to/70-writing-images-to-flash.html

to write to the flash.

As I say, this all works fine on the FE, but the IronStorm hangs at  "Freeing init memory: 332K".
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Overo FE vs IronStorm

hobbesc7
The Gumstix product info page for the IronSTORM COM claims that "According to Texas Instruments, DM3730 is fully backward compatible with previous OMAP™ processors."

It appears this isn't the case -- I am not able to use my same kernel (based on Sakoman's 3.2) and filesystem on the IronSTORM as I used on the Fire/FE.
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Overo FE vs IronStorm

hobbesc7
So I got my Ironstorm to boot by switching from Sakoman's omap-3.2 branch to omap-3.5.  I'm using the same firmware files as used to work for me on the Overo Fire/FE, with omap-3.2.

But now wifi won't come up.

root@sbc:~# lsmod | grep libertas
libertas              103871  0
cfg80211              184213  1 libertas
lib80211                5110  1 libertas
root@sbc:~# modprobe libertas_sdio
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
[  272.857208] libertas_sdio: `sd8686_helper.bin' invalid for parameter `helper_name'
FATAL: Error inserting libertas_sdio (/lib/modules/3.5.0-59242-g9d868d4/kernel/drivers/net/wireless/libertas/libertas_sdio.ko): Invalid argument
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Overo FE vs IronStorm

hobbesc7
On boot I never see "mmc1: new SDIO card at address 0001."  I do see this message when booting 3.0 from an SD card (I'm booting 3.5 from NAND.)

I can tell the wifi hardware isn't really turning on, because the Gumstix isn't scorching hot like it is when things are running "normally," lol.
Loading...