Quantcast

Gumstix Overo Board booting with Kernel 4.1.32

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Gumstix Overo Board booting with Kernel 4.1.32

Dhaval08
This post has NOT been accepted by the mailing list yet.
Hi,

I have my custom board based on Gumstix Overo Board and i have trying to up the board with kernel 4.1.32 and when the board boots up, it hang at some time as per the kernel logs as per below.

[    0.459564] devtmpfs: initialized
[    0.617858] calling  ipc_ns_init+0x0/0x3c @ 1
[    0.622558] initcall ipc_ns_init+0x0/0x3c returned 0 after 0 usecs
[    0.629028] calling  init_mmap_min_addr+0x0/0x20 @ 1
[    0.634307] initcall init_mmap_min_addr+0x0/0x20 returned 0 after 0 usecs
[    0.641448] calling  init_cpufreq_transition_notifier_list+0x0/0x24 @ 1
[    0.648406] initcall init_cpufreq_transition_notifier_list+0x0/0x24 returned 0 after 0 usecs
[    0.657257] calling  net_ns_init+0x0/0x158 @ 1
[    0.663146] initcall net_ns_init+0x0/0x158 returned 0 after 0 usecs
[    0.669921] calling  vfp_init+0x0/0x1c8 @ 1
[    0.674438] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[    0.682647] initcall vfp_init+0x0/0x1c8 returned 0 after 9765 usecs
[    0.689208] calling  ptrace_break_init+0x0/0x2c @ 1
[    0.694427] initcall ptrace_break_init+0x0/0x2c returned 0 after 0 usecs
[    0.701507] calling  register_cpufreq_notifier+0x0/0x10 @ 1
[    0.707336] initcall register_cpufreq_notifier+0x0/0x10 returned 0 after 0 usecs
[    0.715087] calling  twd_clk_init+0x0/0x58 @ 1
[    0.719787] initcall twd_clk_init+0x0/0x58 returned 0 after 0 usecs
[    0.726379] calling  v6_userpage_init+0x0/0x34 @ 1
[    0.731475] initcall v6_userpage_init+0x0/0x34 returned 0 after 0 usecs
[    0.738372] calling  __omap_serial_early_init+0x0/0x170 @ 1
[    0.760925] initcall __omap_serial_early_init+0x0/0x170 returned 0 after 19531 usecs
[    0.769012] calling  __omap_hwmod_setup_all+0x0/0x40 @ 1

So, if any one can help to resolve this, would be great help for me.
Thank you
Loading...